Product selection from
CRAFTSMAN
CRAFTSMAN Twin Rear Bagger - Polyester 42-in x 46-in Black
Article #41537639
Item #000477267
Model #19A30031791
Format 42"x46"
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Add to Cart
Warranty
1-year limited
Add to Cart
Description
Improve your curb appeal with this 42-in twin rear bagger. Create a crisp appearance and a highly manicured professional finish when bagging your grass clippings. It is less likely for the grass to spread to vegetable gardens or flower beds.
- Fits CRAFTSMAN Riding Mowers with 42 in. and 46 in. cutting decks, 2010 and after
- Superior bagging performance with a 6.5 bushel capacity
- Sight window to let you know when the bags are full
- Contents include two bags, chute, hood and hardware
- The discharge chute is made of flex tubing and provides a clear visual of grass flow
- Top hinged hood allows bags to be emptied without pivoting seat forward
- The easy-to-empty bags are made of heavy duty material and feature an integrated handle and a thermoform bottom
- Factory tested and approved to provide the perfect fit, strength, durability and performance
- Refer to the Parts List label under the rider hood for original equipment parts
Product specifications
Fits Mower Deck Size
42/46
Assembly Required
Yes
Brand/Model Compatibility
Craftsman, MTD
Collection Capacity
6.5 Bushels
Height(cm)
45.72
Height(in)
18
Height(mm)
457.2
Length(cm)
93.98
Length(in)
37
Length(mm)
939.8
Mounting Type
Rear
Number of Bins / Bags
2
Series Name
N/A
Weight(kg)
9.9792
Weight(lb)
22
Weight Capacity(kg)
18.144
Weight Capacity(lbs.)
40
Width(cm)
63.5
Width(in)
25
Width(mm)
635.0
Fits
Riding mower
Material
Plastic
Commercial/Residential
Residential
Replaces OEM Part Number
N/A
Package Quantity
1
Shaft Diameter(in)
0
Shaft Diameter(cm)
0.0
Shaft Diameter(mm)
0.0
Base Warranty Labor(Months)
24
Item Disclaimer
Includes bagger only. Mower sold separately
Base Warranty Parts(Months)
24
Type
Bagger
Warranty
1-year limited
CRAFTSMAN Twin Rear Bagger - Polyester 42-in x 46-in Black is rated
out of
5 by
10.
Rated 1 out of
5
by
Moe143 from
Terrible quality
Hose completely split after one season of use terrible quality
Date published: 2024-04-01
Rated 1 out of
5
by
Coathanger from
Bagger falls off when bagging leaves
42” mower and bagger falls off constantly. I had to use a coat hanger to stop from constantly falling off when bagging leaves
Date published: 2023-10-30
Rated 5 out of
5
by
Ciaraa from
Handy !
This twin bagger was easy to install and fit perfectly. The first use went flawlessly….no plugging and the chute evenly distributed the grass among the two baskets. Really nice product. Definitely worth it and would recommend to anyone ! Very useful and handy product!
Date published: 2022-09-11
Rated 1 out of
5
by
ThisDoesntFitMattsMower from
Doesn't Fit
I bought this for a Craftsman 46" YS4500 at it doesn't fit.
Date published: 2022-04-20
Rated 1 out of
5
by
Disappointed256 from
Bagger review
My old Craftsman bagger was way better. This one pushes the leaves away as much as it does pick them up making clean up harder and more time consuming. Seal in lid kept falling off, I'll glue it in place. Too bad them old bagger doesn't fit.
Date published: 2022-04-05
Rated 4 out of
5
by
Taj2 from
T100
It would be more efficiently helpful if it was made a little easier to read and identify the parts ..to have keep going back and forth is exhausting as a woman I’d preferred if there was an actual video installation step but step. I’m having issues tightening the screws on the Shute..can’t use my fingers it’s hard ,I tried using the 7/16 socket it fits but again can’t screw tight as the socket is too long and it’s hard too tighten.. now I’m stuck with no help
Date published: 2021-10-10
Rated 1 out of
5
by
Lcovey from
WouldGoPower if I could
Purchased the “universal” kit for 42”-46” craftsman and after getting everything installed for the bag system, I moved on to the chute install on the deck. To say this doesn’t work Would be an understatement. The discharge chute doesn’t even come close to fitting my model 917. I’m not even sure I could rig it to work, but after spending this kind of money, I shouldn’t have to try and rig something up. Instructions show the boot rod fitting into the deck wheel bracket and then attaching to a mounting stud. Well this deck has no stud and no mounting bracket on the deck wheel. Total
Waste of an hour of my life as this is almost the last step of the process. Do not recommend at all
Date published: 2021-07-31
Rated 1 out of
5
by
A. Nonymous from
Does not fit my Dad's Craftsman
Bought this for my Dad as an early birthday present, for his 46" Craftsman riding mower, and according to what was shown on the site, this would fit. Bought it earlier this week, got it out and tried putting it together/on today (Saturday 26th), only to find out that it does not actually fit "all" Craftsman riders. Under the web page's specifications section, it shows only "Riding Mower" and "Compatible with" and then what appears to be a grey bar. Does that mean that it isn't compatible with any of them?
Even tried reading the instructions, to no avail.
It said if you had a 700 series to use the alternate brackets. The tractor's model number starts with 917, so I tried following the main part. No mounting head bolts as described in the instructions, so I tried using the 700 series side. The mounting points for the extra brackets are not on either side of the back plate, as they would need to be, they are both leaning towards the right side, as you face the rear of the tractor. Had I tried using those, the remaining brackets would not have fit.
If that weren't enough, before trying to attach the bagger, while looking through the parts list in the book to verify the hardware bags had the required items, I noticed it was short a wing knob. I should have stopped right then and there.
Date published: 2021-06-26