Financing available in Stores with Flexiti - Details
Product selection from
DREMEL
Dremel 1/8-in Tungsten Carbide Cutting Bit
Article #1916088
Item #000103810
Model #9901
Format 1/8XS:1/8"
22
.
99
Each
This item is not currently available for immediate purchase, but can be ordered by visiting the selected store.
Delivery
Get it by Thursday, April 23
Will ship next business day
Most orders will ship next business day. Some orders may take up to 7-14 days (where inventory is not available in store). Delivery time may vary due to factors beyond our control. You will receive an email when your order has shipped. See all details.
Gift cards are delivered 2 to 5 days following the confirmation of your order in major urban areas and within 7 business days for remote locations. Gift Cards can be delivered across Canada, except the Yukon, Nunavut, Northwest Territories and Northern Quebec. See all details.
Sold online only. Total price includes delivery without any additional fees. Delivery time may vary due to factors beyond the control of RONA. Some restrictions may apply for remote areas. Signature may be required. Deliveries are made to threshold or curbside only, subject to carrier discretion.
The earliest delivery date displayed is only an estimate. The actual delivery date may change based on availability of products, or due to other circumstances beyond our control. Appliance delivery date can be selected in the checkout. If there is no option to schedule your appliance delivery, our team will contact you to schedule a delivery within 24 hours. Learn More.
RONA's third-party partners handle all express deliveries. Only available for select in-store items in sufficient stock at the participating selected store. Delivery address must be within delivery zone of the selected participating store. Weight limit of 1,475 Kg (3,250 lbs) per order. Not available on national/provincial holidays. Service may not be available due notably high in-store traffic, bad weather conditions or any other situation affecting the availability of the service. See all details.
Our expert center will contact you to schedule a delivery within 24 hours. The delay for delivery is an estimate and may vary according to the availability of products, or due to other circumstances beyond our control. Delivery prices only include curbside delivery, except for appliances. Delivery service is only available within a 50 km radius from the selected store (75 km for RONA+ stores). Additional charges may apply for installation. We will not leave deliveries at an unattended site – note that additional delivery charges may apply for subsequent delivery attempts. See all details.
Add to Cart
Warranty
None
Add to Cart
AI-Generated answer
Description
Tungsten carbide cutter. 1/8 in. For rotary tool. Ideal for shaping, smoothing or removing material. Use on hardened steel, stainless steel, cast iron, nonferrous metal, fired ceramics, plastics, hardwoods and other hard materials. Use with #236 hand piece. Do not run over 30,000 RPM.
- Use the sides of the bit (rather than the tip) for effective cutting
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
- A high-speed bit made of tungsten carbide, the hardest material next to diamonds
- Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods
Product specifications
Warranty
None
Type
Bit
Total Number of Pieces
1
Sub-Brand
N/A
Set/Individual
Individual
Material
Tungsten carbide
Application
Cutting
Brand/Model Compatibility
Dremel
Diameter Measurement
1/8-in
For Use on Ceramic
Yes
For Use on Concrete
No
For Use on Drywall
No
For Use on Glass
No
For Use on Grout
No
For Use on Metal
Yes
For Use on Plastic
Yes
For Use on Wood
No
Item Disclaimer
In-use/lifestyle images-tools/accessories not included
Dremel 1/8-in Tungsten Carbide Cutting Bit is rated
out of
5 by
20.
Rated 5 out of
5
by
Bbeal83 from
Great for carving
[This review was collected as part of a promotion.] I’ve had this bit for over a year and it still works great.
Date published: 2023-09-23
Rated 5 out of
5
by
Johnnyv from
Great addition!
[This review was collected as part of a promotion.] When attached to my 4000 dremel, with the plunge router base, engraving is a breeze!
Date published: 2023-03-09
Rated 5 out of
5
by
butch2 from
wood carving
[This review was collected as part of a promotion.] bought to use with my dremel rotary tool for carving wood. just what I needed to make job easier
Date published: 2023-03-03
Rated 5 out of
5
by
Prezioza48 from
Great biit
[This review was collected as part of a promotion.] I started engraving mirror and glass and this bit came in really handy. It works very good. I’ve done several projects with it and is still sharp.
Date published: 2023-03-03
Rated 5 out of
5
by
JodyHusker from
MY FAVORITE!!!
[This review was collected as part of a promotion.] I bought this in a double pack, and instantly I was hooked with the first use. I am still using the first one from the pack. I have used it on wood, plastic and metal, and it's just as sharp as it was when I took it out of the package.
Date published: 2023-02-23
Rated 5 out of
5
by
Naynay from
Awsome bit
[This review was collected as part of a promotion.] I love this bit it last a decent time an pretty easy to find local
Date published: 2023-02-22
Rated 5 out of
5
by
Tat2guy from
Great cutting tool
[This review was collected as part of a promotion.] I bought to cut out wood . Does well milling out wood
Date published: 2023-02-17
Rated 5 out of
5
by
Pharmhog from
Buttery Goodness
[This review was collected as part of a promotion.] I bought this out of necessity. So glad I did. With 7 doorknobs to install and no pre cutouts for the locking mechanism, the Dremel 200 made quick work on this project.
Date published: 2023-02-16