Voir tous les produits
ROCK-ON
Description
Les vis Rock-On sont toutes indiquées si vous recherchez une fixation efficace des panneaux de ciment (Hardie-Backer, Durock(MD) ou WonderBoard) et des montants en bois ou en acier léger. Ils comportent une tête plate à contour dentelé pour un enfoncement solide et affleurant, ce qui assure une surface lisse et droite lors de la pose du carrelage. Leur filetage est également dentelé et leur pointe est fine, ce qui permet une installation rapide ainsi qu'une adhérence immédiate. L'installation s'effectue d'une seule main à l'aide d'une perceuse/tournevis ou d'une clé à chocs standard et de l'embout étoilé StikFit encastré avec 6 points de contact (inclus avec l'ensemble). Chaque boîte contient 140 vis #10 x 1 5/8".
Caractéristiques
Modèle
Embout étoile
Emballage
Boîte de 140
Composante
Acier
Type
Vis à béton
Largeur
1 5/8" (4,13 cm)
Diamètre
#10
Vous pourriez aussi aimer
PRECISION
Vis à gypse Precision à tête plate, gros filetage, #6 x 1,25 po, noir, 285/bte
Format #6x1 1/4"x1LB-285
Détails
N° d'article 63868933
PRECISION
Vis à gypse Precision à tête plate, filetage fin, #6 x 1,25 po, noir, 285/bte
Format #6x1 1/4"x1LB-285
Détails
N° d'article 63868911
PRECISION
Vis à gypse, gros filetage, 8000 par boîte
Format #6x1 1/4"xBT8000
Détails
N° d'article 63869677
RELIABLE
Vis de 1 1/4” à tête trompette et filet fin, boîte de 100
Format #6x1 1/4"xBT100
Détails
N° d'article 1399043
PRECISION
Vis à gypse Precision à tête plate, gros filetage, #6 x 1,63 po, noir, 224/bte
Format #6x1 5/8"x1LB-224
Détails
N° d'article 63868934
RELIABLE
Vis de 1 1/4” à tête trompette et filet fin, boîte de 500
Format #6x1 1/4"xBT500
Détails
N° d'article 1399044
PRECISION
Vis à gypse, gros filetage, 5000 par boîte
Format #6x1 5/8"xBT5000
Détails
N° d'article 63869678
RELIABLE
Vis de 1 1/4” à tête trompette et gros filet, boîte de 800
Format #6x1 1/4"xBT 8000
Détails
N° d'article 13995414
RELIABLE
Vis de 1 5/8” à tête trompette et filet fin, boîte de 100
Format #6x1 5/8"xBT100
Détails
N° d'article 1399047
RELIABLE
Vis de 1 1/4” à tête trompette et gros filet, boîte de 500
Format #6x1 1/4"xBT 500
Détails
N° d'article 1399161
RELIABLE
Vis de 1 1/4” à tête trompette et gros filet, boîte de 100
Format #6x1 1/4"xBT100
Détails
N° d'article 1399145
RELIABLE
Vis de 1 1/4” à tête trompette et gros filet, boîte de 500
Format #6x1 1/4"xBT500
Détails
N° d'article 1399146
RELIABLE
Vis de 1 5/8” à tête trompette et gros filet, boîte de 5 000
Format #6x1 5/8"xBT 5000
Détails
N° d'article 13995421
RELIABLE
Vis de 1 1/4” à tête trompette et filet fin, boîte de 500
Format #6x1 1/4"xBT 500
Détails
N° d'article 1399164
RELIABLE
Vis de 1” à tête trompette et filet fin, boîte de 100
Format #6x1"xBT 100
Détails
N° d'article 1399070
RELIABLE
Vis de 2” à tête trompette et filet fin, boîte de 100
Format #6x2"xBT 100
Détails
N° d'article 1399050
Vis à béton Rock-On, #10 x 1 5/8" T.P., acier, 140/bte est évalué
de
5 de
39.
Rated 4 de
5
de
Valerie par
Gets the Job Done
[This review was collected as part of a promotion.] These screws are designed for Hardi backer board. They appear to get the job done. When the board is cut narrow for tight spots I find that it helps to back the screw out once or twice to ream out the hole in the backer board or else it can crack and break the board. It adds time to the project, but so does patching break out holes with mortar. The heads of the screws are pleated to help dig out the board which helps but it doesn't cure all problems. The material is sturdy and I'm not experiencing any striped screws. The included bit is solid.
Date de publication: 2018-08-02
Rated 5 de
5
de
Gavin par
[This review was collected as part of a promotion.] Screwed the cement board directly to the subfloor I have to replace. Durable screws. Only thing I had a problem with is that some of the screws heads wasn’t cut out for the bit. Never had that happen before but it was only a few. Other than that they worked well and the cement board is solid and isn’t going anywhere.
Date de publication: 2019-03-03
Rated 1 de
5
de
Robert par
Depth of star drive too shallow!
[This review was collected as part of a promotion.] I have no idea why these screws have achieved such a high rating. The depth of the star drive is so shallow, and hardness of the hardibacker so hard that 90% of the time the star bit bends enough that the drill bit hits the hardibacker... or your hand! It takes quite a bit of pressure to start the screw, and the depth of the star drive is not sufficient to keep the bit in the screw! If there is another brand of these darn things, I suggest getting it!
Date de publication: 2020-01-20
Rated 5 de
5
de
Electricjim par
Best screws for backer board
[This review was collected as part of a promotion.] These screw work the best for the Hardy Backer board. When you drive them in w]\using a 1/4" impact driver they countersink below the surface of the board making it easy to install the tile.
Date de publication: 2019-09-21
Rated 5 de
5
de
Fireman007 par
Interior cement board screw
Really good screw.
Works well in more than recommended use.
Strong, rust free, and comes with new driver in each box.
Date de publication: 2017-06-17
Rated 5 de
5
de
purpletigerninja par
work great
buy the screws that are for the brand of backer board.... critical
Date de publication: 2018-01-22
Rated 5 de
5
de
Jerry par
Zinc-Plated Star-Drive Cement Board Screws
[This review was collected as part of a promotion.] The star screw head and bit are a great combo. The secure fit with the star bit allows the drill to power the screw effortlessly into the cement backer board leaving the screw flush. The length of the screw (1 5/8") is adequate to adhere to any type of underlayment and thickness of the backer board. I would recommend this product and will continue to purchase it for my remodeling needs.
Date de publication: 2019-09-09
Rated 5 de
5
de
FRISCOTIM par
CHANGE IS HARD...BUT WORTH IT
[This review was collected as part of a promotion.] I'm an older guy, I like hex heads, they don't strip out. I purchased these star heads with a little push from an in-store expert, a little older and wiser than I, and I love them. I will most likely begin using star heads from here on out! I love the way the screw sticks and stays, on the included drill driver tip, as long as needed to put it where it needs to go.
Date de publication: 2018-12-15
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
