• icon-wishlist
  • icon-cart
Voir tous les produits GENERAL

Vernier Numérique

Article #01215291 Modèle #146
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

Pour prendre des mesures intérieures et extérieures. Données en impériales, métriques et lecture au 1mm et 1/128". Marche-arrêt automatique. Fait d'aluminium.

Vous pourriez aussi aimer

Aimant icon-wishlist
Aimant
Format 3/8"x3/4"xPK8
Détails
Article #6386045
Guide de coupe en aluminium « Acculine Tru-Line » de 98'' icon-wishlist
JOHNSON
Guide de coupe en aluminium « Acculine Tru-Line » de 98''
 
Détails
Article #0704070
Aimant icon-wishlist
Aimant
Format 3/16"x1/2"xPK10
Détails
Article #63865574
Aimant icon-wishlist
Aimant
Format 6"-24"
Détails
Article #63865579
Bande magnétique icon-wishlist
Bande magnétique
Format 1/2"x10'
Détails
Article #63865573
Détecteur d'humidité numérique, General, plastique icon-wishlist
GENERAL
Détecteur d'humidité numérique, General, plastique
 
Détails
Article #01215202
Rapporteur d'angle General, métal icon-wishlist
GENERAL
Rapporteur d'angle General, métal
 
Détails
Article #01215089
Vernier icon-wishlist
GENERAL
Vernier
 
Détails
Article #01215296
Guide de coupe de 50'' en aluminium icon-wishlist
ROK
Guide de coupe de 50'' en aluminium
Format 50"
Détails
Article #94945069
Alêne icon-wishlist
FULLER
Alêne
Format 5"
Détails
Article #1422096
Fausse équerre coulissante numérique icon-wishlist
GENERAL
Fausse équerre coulissante numérique
Format 8"
Détails
Article #01215292
Balai magnétique à manche ajustable, 24" icon-wishlist
ROK
Balai magnétique à manche ajustable, 24"
Format 24x30-44 1/2"
Détails
Article #94945078
Balai magnétique icon-wishlist
STINSON
Balai magnétique
Format 8"
Détails
Article #00336010
Outil de marquage icon-wishlist
GENERAL
Outil de marquage
 
Détails
Article #01215293
Localisateur d'angle numérique icon-wishlist
JOHNSON
Localisateur d'angle numérique
 
Détails
Article #07045064
Localisateur d'angles icon-wishlist
JOHNSON
Localisateur d'angles
 
Détails
Article #0704066
Aimant icon-wishlist
Aimant
Format 3/8x7/8x1 7/8"xPK2
Détails
Article #63865576
Ramasse-pièces mécanique avec lumière Del, 24" icon-wishlist
GENERAL
Ramasse-pièces mécanique avec lumière Del, 24"
Format 24"
Détails
Article #01215300
MIROIR D'INSPECTION 2-1/4 PO. icon-wishlist
GENERAL
MIROIR D'INSPECTION 2-1/4 PO.
 
Détails
Article #01215096
Aimant de levage icon-wishlist
Aimant de levage
 
Détails
Article #63865580
Aimant icon-wishlist
GENERAL
Aimant
 
Détails
Article #01215295
Magnétiseur / démagnétiseur icon-wishlist
Magnétiseur / démagnétiseur
 
Détails
Article #63865578
Rapporteur d'angle, acier inoxydable, 6" icon-wishlist
GENERAL
Rapporteur d'angle, acier inoxydable, 6"
Format 6"
Détails
Article #01215294
Miroir d'inspection à manche télescopique icon-wishlist
GENERAL
Miroir d'inspection à manche télescopique
Format 360DG 12 1/4-33"
Détails
Article #01215299
Pied à coulisse numériquede Toolway, 6 " icon-wishlist
MATRIX
Pied à coulisse numériquede Toolway, 6 "
 
Détails
Article #330677783
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Vernier Numérique est évalué 2.3 de 5 de 7.
Rated 4 de 5 de par It's all in what you need I purchased one of these for woodworking and it has served me very well over the past few months. I'm not needing 1/64" accuracy, so the complaint about it "not staying zeroed" is not a big deal. I haven't found anything negative with the quality. On the design part however, I wish it were possible to "lessen" the fractional units since 1/64" and usually 1/32" are unnecessary and complicate finding the size I actually need. I'm not quick enough with math to figure how close 1/64ths are to the nearest 1/16" or 1/8". The measurements written on the device are in 10ths, so they don't really help either. These are insignificant issues and I wouldn't "not buy" it just because of them.
Date de publication: 2012-06-13
Rated 1 de 5 de par This tool will push your buttons. Of course, as the saying goes, you get what you pay for. Still, why put out an inferior product. I've only used this twice. On the first attempt the buttons were difficult to activate the unit. On the second attempt they wouldn't work at all. Then, while merely tapping on the side to loosen the button, the display crystal cracked. Do yourself a favor and put a little more money in a "quality product".
Date de publication: 2011-06-04
Rated 1 de 5 de par Don't waste your money This caliper doesn't hold a zero. It has to be reset everytime you use it. I can have it set at zero, put it down, and watch it drift away from zero! When measuring, it has a habit of resetting itself during the measuring process making the measuring process virtually useless.
Date de publication: 2012-03-19
Rated 1 de 5 de par As Bad As They Come At the outset, I will echo the sentiments of others who have had less than flattering opinions. This caliper is, simply put, unequivocally junk, extremely cheaply made and virtually all plastic (which they classify as 'Carbon'). To charge more than $1.00 is an outrage.
Date de publication: 2012-10-12
Rated 1 de 5 de par Don't buy them Not accurate, doesn't stay zeroed, cheap, will not recommend them to anyone. Very unhappy with them. Not worth the price
Date de publication: 2014-02-12
Rated 3 de 5 de par Only down side - Plastic body I saw this caliper on an end cap for $25 and decided on a whim to purchase it as I was searching for one for a while with Fractional measurements. While I really like having the fractional measurements, along with SAE and METRIC readings, I was really disappointed to realize that it has a plastic body. This is really a poor selection in design as the tip of the caliper used for depth readings is very easy to catch on stuff and break off if plastic. The caliper does seem to be very accurate, and for $25 what can you really expect, but even Harbor Freight has a metal body on their "Pittsburg" brand of calipers, but no fractional measurements. The plastic body does seem to flex when trying to measure certain items such as a table saw track to fence measurement, or a deep depth measurement for mortises, etc. I would probably buy this tool again, but I would be willing to pay a little more for one with a metal body.
Date de publication: 2014-04-02
Rated 5 de 5 de par Great help with installing wood floors I bought this caliper to measure the size of the boards of my pre finished hardwood floors so there would not be any gaps. It worked great and was very accurate. The only problem is the top of the slide mechanism sometimes gets bumped out of place because it is too close to the end.
Date de publication: 2014-03-30
  • y_2020, m_4, d_8, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_fr_CA, sid_01215291, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT