
Description
Ce tournevis 14-en-1 de marque Craftsman vous offre une variété d'embouts à double extrémité répondant à vos multiples besoins du quotidien. Il est équipé d'un système de verrouillage à chargement rapide qui permet de maintenir en place tous les embouts hexagonaux de 5/32". Les applications courantes comprennent la menuiserie, l'électricité, la mécanique, la plomberie, le bricolage ou l'entretien et la maintenance de la machinerie. L'ensemble de précision 14-en-1 comprend les embouts cruciformes PH #000, PH #00, PH #0, PH #1, les embouts étoiles TX6, TX7, TX8, TX9, les embouts hexagonaux H 1/16", H 5/64" et les embouts plats SL 1/16", SL 5/64", SL 3/32", SL 1/8".
Caractéristiques
Type
Tournevis
Modèle
Précision
Inclus
4 embouts à tête Phillips, 4 embouts à tête plate, 2 embouts à tête hexagonale, 4 embouts à tête étoile
Composante
Acier et plastique
Couleur
Noir et rouge
Emballage
14-en-1
Garantie
Garantie à vie complète
Vous pourriez aussi aimer
Tournevis de précision, embouts multiples, 14-en-1 est évalué
de
5 de
40.
Rated 1 de
5
de
Russell par
Fix the packaging printing! Bits do NOT fit!
Packaging states "IN HANDLE BIT STORAGE" but you can only store the one short bit, the three double-ended bits are longer and if put in the handle you can't close the cap. I was hoping this would be a nice, compact item for
travel, but the three double ended bits will get lost. I specifically looked for "in-handle bit storage" and chose this item after reading that on the back of the package.
Date de publication: 2020-02-18
Rated 1 de
5
de
Erds par
Going straight to 1 star for lying.
It's a decent precision screwdriver, except for one fatal flaw. On the packaging, on a bullet point it reads "In handle bit storage". But it's bogus, they're too long to fit in the handle. Was there a design change partway through? Just a lack of communication? And it's irritating, because we also use the Husky brand ones that DO fit the bits in the handle. This is a nicer handle, but having no way to carry the bits with the handle, it's not going to be the one I want in my service bag. Stupid, guys. Stupid. Will be returning it.
Date de publication: 2019-09-11
Rated 1 de
5
de
Ohmar par
Bits too long to store in handle!
Seems like a great design until you realize the included double-ended bits are too long to fit in the handle!
Glad we figured it out before wrapping and gifting for christmas.
Date de publication: 2019-12-22
Rated 3 de
5
de
ChrisS par
No, the bits do not fit in the handle.
I bought this specifically because the bits are supposed to fit into the handle as it states on the packaging, but they're not even close to fitting.
Even if the depth were sufficient for these long bits to fit into the handle they wouldn't all fit anyway because the diameter of the cavity in the handle wouldn't accommodate all the bits.
Date de publication: 2020-12-21
Rated 2 de
5
de
CW2SAD par
Fals advertising!
Keep a small toolbox in my kitchen and needed a compact jeweler’s screwdriver for it. Bought this for that purpose alone. As it doesn’t trap the bits in the handle, it’s useless for my toolbox. It seems customers have been reporting this for some time! Why hasn’t this flaw been fixed???
Date de publication: 2019-12-07
Rated 2 de
5
de
LD par
Soft screwdriver bits
I purchased this item to remove the attaching torx screw that holds a carbide cutting tip on a lathe boring bar. although the tool was successful in removing the screw, it twisted in the process and would not work again. The screwdriver bits are not hardened and not of good quality.
Date de publication: 2019-12-01
Rated 3 de
5
de
ChrisBBriggs par
Storage is not sufficeint
[This review was collected as part of a promotion.] I was expecting to be able to store the bits in the handle like the other driver I have like this, but the bits are too long to fit in the handle. The only bit that will fit in the handle is the one that comes loaded in the driver.
Date de publication: 2019-07-29
Rated 3 de
5
de
FredIII par
Great product with one BIG problem
This is a high-quality tool (especially for the price) that has one BIG problem, which some other reviewers have already noted: every bit, except for the one that comes already mounted in the socket, is TOO LONG to fit in the handle by about 3/8". Also, even if the handle was longer, it would be impossible to store ALL the bits in the handle because the entire group of bits is too wide for the storage compartment in the handle. Please don't advertise "In handle bit storage" if the bits are too long and too wide to fit. This was very disappointing. A very simple design change would permit storing at least some bits in the handle: make them all shorted by about 1/2" or a little more. I will be keeping this tool, but because of this design flaw, I cannot recommend it to others.
Date de publication: 2020-02-06