Rabais hebdomadaires
Voir tous les produits
TIMBERWALL
Description
La collection Barnwood contribue à la préservation de l'architecture, des paysages et de l'histoire. Elle capture la tendance actuelle de la conception des planches de bois de grange récupérées en utilisant du bois neuf provenant de forêts durables bien gérées. La texture, la chaleur et les couleurs naturelles ajoutent des possibilités de motifs variés : murs pleins, murs d'angle ou demi-murs. La collection Barnwood peut également créer un superbe design pour les cadres de miroirs, les têtes de lit, l'art mural, etc. Les possibilités sont infinies!
- La couleur peut varier de la représentation de l'écran - les accessoires des photos ne sont pas inclus
- Chaque boîte contient 9,5 pieds carré : 11 morceaux de 31 1/2 po x 3-15/16 po
Caractéristiques
Largeur réelle (po)
3,94
Longueur minimale normalisée (pi)
32
Longueur réelle (pi)
31,5
Épaisseur réelle (mm)
0,38
Épaisseur minimale normalisée (po)
0,4
Essences de bois
Pin
Forme du bord
Carré
Type
Panneau, nominale
Utiliser pour les projets de menuiserie
Oui
Utiliser pour le mobilier et les armoires
Non
Pour les plafonds
Non
Type de procédé sous pression
Non traité
Bois franc/bois tendre
Bois tendre
Longueur nominale en pieds
3 pi
Indice d'humidité
Séché au séchoir
Pour les planchers
Non
Grade
Apparence
Dimensions nominales (É x l)
3/8 x 4 po
Pour les cadrages
Non
Nom de la gamme
Barnwood
Matériau
Bois
Traité sous pression
Non
Surfaçage
Brut
Utiliser pour les murs
Oui
Prêt à teindre/peindre
Oui
Garantie
Limitée de 1 an
Pour les tablettes
Non
Pour les moulures décoratives extérieures
Non
Fini
Teint
Vous pourriez aussi aimer
MURDESIGN
Panneau mural décoratif U-Groove, 48" x 96", HDF, blanc
Format 1/4x48x96"
N° d'article 48095033
MURDESIGN
Revêtement mural, effet de bois, 1/4" x 48" x 96", blanc
Format 0.25x48x96"
N° d'article 48095056
MURDESIGN
Revêtement mural, effet de bois, 1/4" x 48" x 96", gris
Format 0.25x48x96"
N° d'article 48095057
MURDESIGN
Revêtement mural, effet de béton, 1/4" x 48" x 96"
Format 0.25x48x96"
N° d'article 48095058
MURDESIGN
Revêtement mural imitation bois de grange, 48 po x 96 po, brun
Format 0.25x48x96"
N° d'article 48095040
MURDESIGN
Panneau décoratif de faux bois blanchi, 48" x 96"
Format 0.25"x48"x96"
N° d'article 48095071
MURDESIGN
Panneau mural, effet de briques, 48" x 96", rouge
Format 0.25x48x96"
N° d'article 48095046
MURDESIGN
Planches Duo, 5/16"-1/2" x 32", HDF, blanc
Format 5/16"-1/2" 6x32"
N° d'article 48095001
MURDESIGN
Panneau mural décoratif Mirage, 32" x 48", HDF, blanc
Format 1/4"x32"x48"
N° d'article 48095021
MURDESIGN
Panneau décoratif MURdesign Vesper, HDF, 1/4" x 48" x 96", noir
Format 0.25"x48"x96"
N° d'article 48095077
MURDESIGN
Revêtement mural Duo Béton, 6,5" x 32", HDF, béton
Format 1/4-1/2" 6.5x32"
N° d'article 48095030
Panneau préfini « Flocon de neige », 8' x 4', lauan/vinyle
Format 2.7MMX4'X8'
N° d'article 5068011
MURDESIGN
Panneau mural décoratif Laurier, 32" x 48", HDF, blanc
Format 1/4"x32"x48"
N° d'article 48095020
Panneau préfini, finition en vinyle « Napa Plum », 4' x 8'
Format 4x8'x3MM
N° d'article 67395000
MURDESIGN
Panneau décoratif en HDF Canton Malmo, MURDesign, 48 po x 96 po, blond
Format 0.25"x48"x96"
N° d'article 48095078
Is this product a peel and stick as well?
yes it is!
Thank you
Date de publication: 2020-08-05
Est-ce vraiment des différentes teintes de gris? Ou est-ce plutôt dans les teintes de beige/brun? Merci
Bonjour Annick,
Driftwood Grey est un mélange de plusieurs ton de gris. La couleur des images peut varier d'un écran à l'autre.
Merci
Date de publication: 2020-04-08
If there’s 11 boards, it has to cover more then 9.5 square feet!
32x4=128
128x11=1408
1408/144= 9.7 sq. Ft.
Maybe check your math
Date de publication: 2020-10-06
How many square feet of wall will 1 package of this cover?
About 9.5 square feet. There’s 11 boards. They are 31 1/2” x 3 15/16”. There’s light and dark grey boards in a box, so you can make a nice pattern.
Date de publication: 2020-04-26
do u have starter strips and corner pices
No and no. The strip has a glue tape located in the middle of the wood pieces. First, i had a strait wall to begin with... so that was easy to start... just put my first one on and went left and right, cutting off the ends with a jigsaw. Then used a new plank on the other end working back over. This created an even latice. Once I got to the top i cut out the not glue portions out, leaving only the glue part to finish the top row. Upon completion I used finishing nails and a hammer to add stregth to the hold on the wall. It really isn’t very hard. You just need a plan.
Date de publication: 2019-07-31
I am quite confused about the number of boxes to order. If my room is 120 square feet, please tell me how many boxes to buy. Thanks
You need at least 13 boxes. Each box covers 9.5 square feet. 9.5 x 13 = 123
It could be 14, depending on how the planks are arranged.
Date de publication: 2019-07-05
Can you put this product near a gas fireplace ?
It depends on the clearance requirements for your fire place. The wood cladding is regular, untreated, natural wood.
Date de publication: 2019-03-26
Can this product go over ceramic tile backsplash?
Not sure if you can apply to tile, but for sure would not use this for a backsplash.
Date de publication: 2019-03-19
Planches décoratives Barnwood, gris bois flotté est évalué
de
5 de
4.
Rated 5 de
5
de
manduet par
makes for a beautiful feature wall
love it even thinking of ordering more to do my bedroom.....
Date de publication: 2018-10-04
Rated 3 de
5
de
Greg75 par
Easy enough... but not that easy either
1. It looks great!
2. So it peels and sticks. The boards aren’t all strait amd require additional finishing nails in many boards to get them to stay on the wall.
3. I cut it using a jigsaw from the back side. And trimmed them as needed.
4. Cutting around sockets will require longer screws to reattach them.
5. The rest is pretty easy... but again... more work than any video let on.
Date de publication: 2019-04-07
Rated 4 de
5
de
Greg75 par
Requires finishing nails
I bought and installed the Timber-wall wood. It looks absolutely great! But there are some things that are not well explained that I had to figure out.
1. You’ll need to buy finishing nails. Almost all the corners need to be fixed on the wall with finishing nails. I did it with a hammer, depending on the size of the wall you are doing, you may want to rent a nail gun. But I had a small wall so not a big deal. Weeks after the install some boards that weren’t nailed in started lifting.m, so good thing I had my hammer handy.
2. I don’t think you can to this with an exacta knife like the videos indicate, you’ll split the wood unevenly and do kind of a bad job. You need at least a jigsaw to make the cuts around sockets and the last upper portion of you’re wall. I had to trim the top row (last row) precisely on both side, keeping the glue strip for affixing my last boards.
3. Have a plan on your layout. You should look at what others have done and choose what will look best on your wall. I chose an even cut. I like the results.
Finally, I’m glad I did it. Wouldn’t change my product or mind, but the company should review it’s stick tape it adds to the back if it’s boards to ensure a better fastening or at least tell you to add finishing nails as a matter of course.
Date de publication: 2019-04-17
Rated 1 de
5
de
SSAb par
Beautiful colour but poor quality
I purchased this product because it was the nicest white barn board that I could find. I still love the colour and am very happy with it but the product quality is very poor and certainly not acceptable for the price.
Boards in the same package are not the same width. The width of a single board tapers from one end to the other and the boards cup very badly which leaves ledges when you install it. I have attached photos.
Date de publication: 2019-05-23
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
