• icon-wishlist
  • icon-cart
Voir tous les produits STANLEY

Cloueuse de finition

Article #0305324 Modèle #TRE650 Format 5/8"-1"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Cloueuse de finition électrique. 10 A de puissance. Cadran de réglage de puissance. Modèle à nez ouvert pour facilement dégager les clous coincés. Gâchette à sûreté sur le nez. Pointe ne marquant pas pour protéger les surfaces. Capuchon et poignée douce. Câble de 8 pi. Enfonce 5 tailles de clous 5/8 po à 1 po. En ABS.

Vous pourriez aussi aimer

Agrafes icon-wishlist
STANLEY
Agrafes
Format 3/8"xBT1500
Détails
Article #03055978
Agrafes icon-wishlist
STANLEY
Agrafes
Format 1/2"xBT1500
Détails
Article #03055977
Agrafes icon-wishlist
ARROW
Agrafes
Format 3/8"xPK1250
Détails
Article #0012029
Agrafes icon-wishlist
STANLEY
Agrafes
Format 5/16"xBT1500
Détails
Article #03055979
Agrafes icon-wishlist
STANLEY
Agrafes
Format 3/8"xBT5000
Détails
Article #03055955
Agrafes icon-wishlist
STANLEY
Agrafes
Format 1/4"xBT1500
Détails
Article #03055981
Agrafeuse manuelle icon-wishlist
STANLEY
Agrafeuse manuelle
 
Détails
Article #03055902
Agrafes icon-wishlist
STANLEY
Agrafes
Format 9/16"xBT1500
Détails
Article #03055976
Agrafes            gris icon-wishlist
STANLEY
Agrafes gris
Format 5/16"xBT5000
Détails
Article #03055954
Agrafeuse marteau icon-wishlist
STANLEY FATMAX
Agrafeuse marteau
 
Détails
Article #03055943
Agrafeuse icon-wishlist
STANLEY
Agrafeuse
 
Détails
Article #03055808
Agrafes icon-wishlist
STANLEY
Agrafes
Format 1/2"xBT5000
Détails
Article #03055956
Agrafes icon-wishlist
STANLEY
Agrafes
Format 3/8"xBT1500
Détails
Article #03055980
Marteau agrafeur icon-wishlist
BOSTITCH
Marteau agrafeur
 
Détails
Article #0277009
Agrafes icon-wishlist
STANLEY
Agrafes
Format 1/4"xPK1500
Détails
Article #03055951
Agrafes icon-wishlist
STANLEY
Agrafes
Format 5/16"xPK1500
Détails
Article #03055952
Agrafes icon-wishlist
STANLEY
Agrafes
Format 1/4"xBT5000
Détails
Article #03055953
Agrafeuse icon-wishlist
STANLEY
Agrafeuse
 
Détails
Article #03055640
Agrafeuse icon-wishlist
STANLEY
Agrafeuse
 
Détails
Article #03055992
Pistolet agrafeur icon-wishlist
ARROW
Pistolet agrafeur
 
Détails
Article #0012002
Ensemble d'agrafes et de clous icon-wishlist
STANLEY
Ensemble d'agrafes et de clous
Format 18CA
Détails
Article #03055984
Pistolet agrafeur 3 en 1 « SharpShooter Plus » icon-wishlist
STANLEY
Pistolet agrafeur 3 en 1 « SharpShooter Plus »
 
Détails
Article #0305283
AGRAFES À PLAFOND icon-wishlist
STANLEY
AGRAFES À PLAFOND
Format 17/32"xBT1500
Détails
Article #03056030
Ensemble d'agrafes icon-wishlist
STANLEY
Ensemble d'agrafes
Format CR1500
Détails
Article #03055950
GOUJONS D'ANCRAGE icon-wishlist
RAMSET
GOUJONS D'ANCRAGE
Format 2 1/2"xPK/25
Détails
Article #2293141
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Cloueuse de finition est évalué 1.4 de 5 de 7.
Rated 1 de 5 de par Worked fine when it worked Bought it last year and shot one load of brads, that's one loading of the gun not a whole box. Took it out this year and shot 5 brads and it stopped working. Reloaded it, unloaded it, reloaded it and nothing. Checked continuity at the plug and it has no continuity no matter what position the on/off switch is at, whether the trigger is pulled on not on whether it is pressed against a block of wood. Checked on a confirmed live outlet. So it is probably not getting power to the tool. Likely suspects are interlock switch, on/off switch or trigger. Very disappointed. Stanley name is now synonymous with junk and I will not consider them again. Plenty of other tool manufacturers out there.
Date de publication: 2020-03-08
Rated 1 de 5 de par 1" Brad Nailer I bought this product in 2014 used it maybe twice and now when I try to use it again in August 2018 it wont work at all, no power! I am sure mechanically its ok I can only assume that the electric motor must be defective for it not to work at all after these past few years
Date de publication: 2018-08-15
Rated 1 de 5 de par Stopped working only 2nd time I used it I bought this end of Oct 2016 and it just stopped working while I was nailing up baseboards. Nothing jammed, it was as if power was cut off.
Date de publication: 2016-12-21
Rated 2 de 5 de par Jam not a sandwich I bought this TRE 650 Oct 19/17 on EBay at nimbus_market. I used it today 4 Aug /18 to nail down window flashing.When it worked it worked well but it JAMMED every 5-8 Brad nails. I needed needle nose pliers to remove the jammed bent nail.Needless to say it took more time and I was slightly miffed.
Date de publication: 2018-08-04
Rated 1 de 5 de par Stanley Brad Nailer Failed It broke the 3rd time I used it. I don't recommend this product .
Date de publication: 2018-05-11
Rated 1 de 5 de par Stanley TRE650 Nail gun Rubbish!, save up for a proper one, Ive had two of these now, both bought brand new, and worked fine when working, but 1st one i had about 2 years but with only very occasional use, jammed fairly regularly, then just stopped working altogether, second one i purchased packed up completely second time i used it, but by that time id had it about 18 months, very poor unreliable product!
Date de publication: 2019-07-11
Rated 3 de 5 de par Not powerful enough I bought this because I didn’t want to carry around a compressor. The nailer didn’t jam and fired at every pull. The problem is the nailer doesn’t have enough power to drive a 3/4 inch brad all the way into a 1/4 inch mdf molding. I had to use a punch to set the nail properly. I will be returning the tool and get my compressor back out.
Date de publication: 2020-02-02
  • y_2020, m_8, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_fr_CA, sid_0305324, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT