• icon-wishlist
  • icon-cart
Voir tous les produits DMX AIRFLOW

Membrane sous-couche de plancher, polymère, 100 pi²

Article #30475000 Modèle #DMX AIRFLOW Format 100PC
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La membrane sous-couche DMX Airflow convient à tout type de revêtement de sol. Faite de mousse imperméable à cellules fermées sur les 2 côtés, elle permet une circulation d'air sous le plancher ce qui élimine les moisissures causées par l'humidité. Ce produit breveté offre une insonorisation supérieure et isole vos planchers du froid avec le ruban pare-vapeur qui assure une étanchéité complète. La membrane est cotée R-1 et possède une résistance à la compression de 8250 lb/pi² (56 PSI). Ce produit est couvert par une garantie de 50 ans.

Caractéristiques

Composante
Polymère
Format
100 pi² (9,29 m²)
Garantie
50 ans
Inclus
Ruban pare-vapeur
Largeur
42" (106,68 cm)
Longueur
29' (8,84 m)
Utilisations
Avec revêtements de sol en stratifié, bois dur d'ingénierie, composites de bois-plastique (épaisseur minimum de 5 mm), vinyle SPC (épaisseur minimum de 5 mm), tapis
Poids
12 lb (5,44 kg)
Résistance à la compression
8250 lb/pi²

Vous pourriez aussi aimer

Joint de lisse icon-wishlist
Joint de lisse
Format 3/16"x51/2"x82'
Détails
Article #0917004
Joint de lisse icon-wishlist
Joint de lisse
Format 1/4"x5 1/2"x82'
Détails
Article #0917002
Joint de lisse icon-wishlist
Joint de lisse
Format 3/16"x31/2"x82'
Détails
Article #0917003
Joint d'étanchéité, 5 1/2" x 75', blanc icon-wishlist
CAN-CELL
Joint d'étanchéité, 5 1/2" x 75', blanc
Format 3/16"x51/2"x75'
Détails
Article #35475079
Joint d'étanchéité, 3 1/2" x 75', blanc icon-wishlist
CAN-CELL
Joint d'étanchéité, 3 1/2" x 75', blanc
Format 3/16"x3 1/2"x75'
Détails
Article #35475055
Joint de lisse icon-wishlist
Joint de lisse
Format 1/4"x3 1/2"x82'
Détails
Article #0917001
Membrane imperméable pour les fondations icon-wishlist
DELTA
Membrane imperméable pour les fondations
Format 5x65.6'
Détails
Article #0382001
Membrane isolante pour plancher, Delta-FL, 3.5' x 30' icon-wishlist
DELTA
Membrane isolante pour plancher, Delta-FL, 3.5' x 30'
Format 3.5'x30' 105PC
Détails
Article #03825022
Attaches Delta, paquet de 50 icon-wishlist
DELTA
Attaches Delta, paquet de 50
Format 2x8x11"
Détails
Article #0382016
Membrane d'isolation pour fondation, Delta, 6.6' x 65.6' icon-wishlist
DELTA
Membrane d'isolation pour fondation, Delta, 6.6' x 65.6'
Format 6.6'x65.6'
Détails
Article #0382009
Bande de finition, 6' x 2", paquet de 33 icon-wishlist
DELTA
Bande de finition, 6' x 2", paquet de 33
Format 6'x2"
Détails
Article #0382017
Nécessaire d'étanchéisation de fondation Delta-MS icon-wishlist
DELTA
Nécessaire d'étanchéisation de fondation Delta-MS
 
Détails
Article #03825021
Membrane imperméable pour fondation, 8' x 65' 7" icon-wishlist
DELTA
Membrane imperméable pour fondation, 8' x 65' 7"
Format 8x65.6'
Détails
Article #0382003
Joint d'étanchéité rainuré pour lisse, 7 1/2" x 75', blanc icon-wishlist
Joint d'étanchéité rainuré pour lisse, 7 1/2" x 75', blanc
Format 7 1/2"
Détails
Article #35475139
Scellant, 825 ml, noir icon-wishlist
DELTA
Scellant, 825 ml, noir
Format 825ML
Détails
Article #03825024
Membrane imperméable pour les fondations, 3,5' x 65,6' icon-wishlist
DELTA
Membrane imperméable pour les fondations, 3,5' x 65,6'
 
Détails
Article #0382002
Sous-plancher, 3' 3" x 50' 10" icon-wishlist
SUPERSEAL
Sous-plancher, 3' 3" x 50' 10"
Format 1/8x1Mx15.5M
Détails
Article #35475075
Membrane imperméable pour fondation, 7' x 65' 7" icon-wishlist
DELTA
Membrane imperméable pour fondation, 7' x 65' 7"
 
Détails
Article #0382012
Clous pour membrane imperméable, 1 1/2 po icon-wishlist
DELTA
Clous pour membrane imperméable, 1 1/2 po
Format 1 1/2"xPK/100
Détails
Article #0382010
Bâche en polyéthylène, 4 couches, 12' x 20', argent icon-wishlist
TOOLWAY
Bâche en polyéthylène, 4 couches, 12' x 20', argent
Format 12'x20'
Détails
Article #00336110
Membrane isolante pour plancher, Delta-FL, 4.75' x 68.6' icon-wishlist
DELTA
Membrane isolante pour plancher, Delta-FL, 4.75' x 68.6'
Format 4,9'x68,6' 328PC
Détails
Article #0382014
Couverture isolante pour béton, 8' x 25', noir icon-wishlist
FLEXFOIL
Couverture isolante pour béton, 8' x 25', noir
Format 8'x25'
Détails
Article #50905175
Moulure alvéolée, 4' icon-wishlist
Moulure alvéolée, 4'
Format 4' 20MX
Détails
Article #35475072
Fixations « SuperPlugs » icon-wishlist
Fixations « SuperPlugs »
Format 50MX
Détails
Article #35475073
Sous plancher DMX AirFlow, polyéthylène, 100 pi² icon-wishlist
DMX AIRFLOW
Sous plancher DMX AirFlow, polyéthylène, 100 pi²
Format 100PC
Détails
Article #30475001

Is this suitable for use under sheet vinyl flooring?

Posée par: Kam232
Vendor states: "You can lay Laminates, Engineered Hardwood, WPC and SPC Vinyl Planks (5mm or thicker) or Carpet directly on top of DMX Airflow™" https://dmxairflow.com/laminate/
Répondue par: RedVest
Date de publication: 2020-04-21

Can this be used with the Mono Serra Rigid Vinyl plank drop lock flooring or is the DMX LVT recommended?

Posée par: Jeff 621
Vendor states that either model can be used with luxury vinyl plank with a minimum thickness of 5mm. https://dmxairflow.com/lvt/
Répondue par: RedVest
Date de publication: 2020-04-15

can this be used on top of concrete as a barrier before putting down plywood sub floor?

Posée par: Angel465
Vendor does not recommend installing this under plywood/OSB: https://www.dmxairflow.com/app/uploads/2019/07/DMX-Airflow-Premium-Installation-Checklist-2.pdf
Répondue par: RedVest
Date de publication: 2020-04-15

Can a 5/8 OSB Subfloor be installed and tapconned over this and then a vinyl click lock flooring?

Posée par: EliteShadow
Yes.....I usually squirt a shot of silicon in beforehand and vacuum out each hole before screwing in tap cons..helps to provide continuous VB protection underneath
Répondue par: Rob the floor guy
Date de publication: 2020-03-06

Can l install it under the engineered hardwood 1/2" in thickness? I see that laminate and carpet are fine for install. Thank you!

Posée par: KMIKE
Has to be a float-click style flooring or else a 5/8-3/4” subfloor needs to be installed first
Répondue par: Rob the floor guy
Date de publication: 2020-02-26

Can use this DMX airflow underlayment with luxury Vinyl ? Vinyl tile pecs? Tile dimensions: 60 cm x 30 cm (23.62 in. x 11.81 in.)Thickness: 4.2 mm (0.165 in.)

Posée par: Adrianz
i think minimum thickness has to be around 5 or 6mm.. otherwise the plank joints could buckle.
Répondue par: thehump
Date de publication: 2020-01-16

When using DMX airflow underlayment on a basement cement floor, can carpet be installed over it or do I need foam underlayment as well?

Posée par: Truus
The DMX will protect the carpet from a moisture point of view, so it will work fine, but I still recommend a foam layer. It comes down to comfort. If you are installing a dense berber carpet, you will get a stiff feeling and slight noise when you walk on it. I wouldn't recommend a carpet with high pile. The foam for carpet provides the squishy softness for the carpet as well as noise reduction.
Répondue par: PE Renovations
Date de publication: 2019-12-23

I’m floorings basement in an old house that gets regular dampness. It’ll be a storage area mainly. Can I put plywood directly on top of dmx

Posée par: Thomas 888
Yes you can.  That’s how I used it too, no issues. Just make sure you install it correctly, using the tape. You’ll need to screw the plywood too. 
Répondue par: JimmyFive
Date de publication: 2019-07-20
  • y_2020, m_5, d_30, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_36
  • loc_fr_CA, sid_30475000, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Membrane sous-couche de plancher, polymère, 100 pi² est évalué 4.0 de 5 de 6.
Rated 4 de 5 de par Excellent product, awfull tape I used it for the entire basement with compatible SPC luxury vinyl. Floors are nice, warmish, no smell. BUT. There is a small leakage through the tape. It would be a disaster for laminate. The scotch that they supplied with the product is awflul, dollar store quality. Use blue technical tape and that will be excellent
Date de publication: 2019-03-20
Rated 5 de 5 de par Easy Installation / Good Value This review is based on installation of DMX airflow one year ago. I installed DMX in my basement underneath laminate. We were concerned about potential issues with the laminate getting wet and wanted something which was a little higher quality than the base subfloor underlayments and that was easy to install. So far, there haven't been any noticeable water issues. There is no smell and no visible warping of the laminate. The feel on the foot is decent. The floor is warmer with DMX and laminate than without. There is also no clicking sound which i know is a problem with the underlayments that are not padded on the bottom. It does feel a little more soft than having OSB underneath but it's barely noticeable and you get used to it quickly. Something to consider is that if your basement floor is not level, you will need to find a leveling solution prior to installation. I have a few spots that are a bit off and you can feel them when walking on those areas. These areas are only a couple of square feet in a light traffic area in a giant basement so I don't care and technically I should have fixed it before installation. Installation is easy - you roll it out, cut at the wall with an exacto knife, and tape the seams. The alternative is a base underlayment with OSB or the expensive interlocking squares - both requiring more complicated cuts to be made. Also the alternatives are not waterproof and you won't be able to reuse them if soaked. This product may seem expensive but just wait until it goes on sale. Also, you can save money as installation is doable for someone with little experience like myself. Good luck!
Date de publication: 2020-02-05
Rated 5 de 5 de par Great product I Installed over the concrete floor in my basement. Although it is a more expensive option then regular padding, it is well worth the cost, as the additional thickness will make the basement warmer in the winter and lower energy bills, along with the improved airflow under the floor to eliminate any moisture of mold that could develop with cheaper options.
Date de publication: 2020-04-02
Rated 1 de 5 de par Only good if your installing Carpet! Purchased DMX subfloor (9 rolls) as I wanted to install LVP (luxury vinyl plank) in my basement. Basement slab is perfectly level. I purchased the LVP from a local flooring company, the product is high quality and cost me $4k. Unfortunately after the installation I noticed that almost every butt joint would click and come apart. I have installed a lot of flooring, myself and my crew installed the flooring correctly. The underlayment has too much play for a drop and lock LVP. I would also not recommend a floating engineered hardwood as there is too much risk. If your going to install carpet you would be fine with this product, otherwise be warned. Spend the extra $1/ft2 and buy an actual subfloor or install 3/4" OSB over top of foundation drainage board, same result but more economical. I highly regret installing this product, especially after all of the effort and money it took to finish my basement. Unfortunately if you remove LVP after installation the joints get damaged as the product is thin. So essentially I am stuck with butt joints that don't lock together and click because I don't want to waste another $2k-$4k damaging the LVP to pull it up. I also should note this is the very first review I have ever written, I felt compelled to warn people of my mistake.
Date de publication: 2019-07-17
Rated 5 de 5 de par Good Underlayement It is very good product for basement. I try few other options but this one was good for money and easy to work with.
Date de publication: 2019-04-18
Rated 4 de 5 de par Bon produit! Faites attention à la sous couche noire ça défait facilement, manipuler avec soin
Date de publication: 2019-12-04
  • y_2020, m_5, d_30, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_fr_CA, sid_30475000, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT