• icon-wishlist
  • icon-cart
Voir tous les produits KOBALT

Scie à onglets, 7 1/4", 10 A

Article #89335003 Modèle #SM1816LW Format 7 1/4"x10AM
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Cette scie à onglets de Kobalt permet d'obtenir d'excellents résultats de coupe grâce à son système de laser réglable sans outils. Elle est dotée d'un moteur par roulement à billes de 10 A et de 5000 tr/min qui offre une puissance de coupe supérieure. Sa capacité polyvalente permet d'effectuer aisément un vaste éventail de coupes nettes et sa grande base offre un meilleur soutien. Garantie de 3 ans. Produit certifié UL.

Caractéristiques

Couleur
Bleu
Dimensions de la lame
7 1/4" (18,4 cm)
Garantie
Garantie de 3 ans
Tours par minute
5000 tr/min
Type
Scie à onglets
Ampérage
10 A
Angle de coupe
Jusqu'à 50°
Normes
UL
Composante
Aluminium
Marquage au laser (O/N)
Oui

Produits fréquemment achetés ensemble

Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
Article #32045053
Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Détails
Article #74045239
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
 
Détails
Article #32045050

Vous pourriez aussi aimer

Scie à onglet combiné coulissante, DeWalt 12", 15 A icon-wishlist
DEWALT
Scie à onglet combiné coulissante, DeWalt 12", 15 A
Format 12"x15AM
Détails
Article #00276378
Scie à onglets combinée, 15 amp., 10" icon-wishlist
DEWALT
Scie à onglets combinée, 15 amp., 10"
Format 10" 15AM
Détails
Article #00277180
Scie à onglets au laser 10 po icon-wishlist
MAKITA
Scie à onglets au laser 10 po
Format 10"x13AM
Détails
Article #11975214
Scie à onglet coulissante à deux biseaux, 12'' icon-wishlist
BOSCH
Scie à onglet coulissante à deux biseaux, 12''
Format 12"x15AM
Détails
Article #19835411
Scie à onglets avec support, 10", 15 A icon-wishlist
MAKITA
Scie à onglets avec support, 10", 15 A
Format 10"x15AM
Détails
Article #11975392
Scie à onglet combinée coulissante, 12", 15 A icon-wishlist
DEWALT
Scie à onglet combinée coulissante, 12", 15 A
Format 12"x15AM
Détails
Article #00275512
Scie à onglets combinés à coulisse - 8 1/2 po icon-wishlist
MAKITA
Scie à onglets combinés à coulisse - 8 1/2 po
Format 8 1/2"x10.5AM
Détails
Article #11975335
Scie à onglets combinés à coulisse sans-fil, 18 V,  10'' icon-wishlist
MAKITA
Scie à onglets combinés à coulisse sans-fil, 18 V, 10''
Format 10"x18V
Détails
Article #11975464
Scie à onglet coulissante avec support,12", composite, 15 A icon-wishlist
BOSCH
Scie à onglet coulissante avec support,12", composite, 15 A
Format 12"x15AM
Détails
Article #19836216
Scie à onglets combinée coulissante à batterie, 20V MAX icon-wishlist
DEWALT
Scie à onglets combinée coulissante à batterie, 20V MAX
Format 7 1/4"x20V
Détails
Article #00275878
Scie à onglets combinée coulissante, 10", 15 A icon-wishlist
MAKITA
Scie à onglets combinée coulissante, 10", 15 A
Format 10"x15AM
Détails
Article #11975391
Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4'' icon-wishlist
CRAFTSMAN
Scie à onglet coulissante sans-fil Craftsman, 20V MAX, 7 1/4''
Format 7 1/4"x20V
Détails
Article #00277177
Scie à onglets coulissante 10 po icon-wishlist
MAKITA
Scie à onglets coulissante 10 po
Format 10"x13AM
Détails
Article #11975297
Scie à onglets pliante de 10", 15 A icon-wishlist
CRAFTSMAN
Scie à onglets pliante de 10", 15 A
Format 10"x15AM
Détails
Article #41537043
Scie à onglets coulissante à simple inclinaison, Bosch, 18 V, lame de 8 1/2" icon-wishlist
BOSCH
Scie à onglets coulissante à simple inclinaison, Bosch, 18 V, lame de 8 1/2"
Format 8 1/2"x18V
Détails
Article #19836362
Scie à onglets, 10", 13 A icon-wishlist
Scie à onglets, 10", 13 A
Format 10"x13AM
Détails
Article #59695044
Scie à onglet coulissante Bosch, deux biseaux, 10'' icon-wishlist
BOSCH
Scie à onglet coulissante Bosch, deux biseaux, 10''
Format 10"x15AM
Détails
Article #19835716
Scie à onglet coulissante à biseau simple de 10" Craftsman icon-wishlist
CRAFTSMAN
Scie à onglet coulissante à biseau simple de 10" Craftsman
Format 10"x15AM
Détails
Article #97925012
Scie à onglet combinée, biseau simple, Metabo HPT, 10''/15 A icon-wishlist
METABO HPT
Scie à onglet combinée, biseau simple, Metabo HPT, 10''/15 A
Format 10"x15A
Détails
Article #37815225
Scie à onglets multivolt Metabo HPT, 36 V, 10'' icon-wishlist
METABO HPT
Scie à onglets multivolt Metabo HPT, 36 V, 10''
Format 10"x36V
Détails
Article #37815201
Scie à onglet coulissante à double biseau avec laser, 12" icon-wishlist
METABO HPT
Scie à onglet coulissante à double biseau avec laser, 12"
Format 12"x15AM
Détails
Article #37815204
Scie à onglets double combinée avec laser, 10", 3800 tr/min icon-wishlist
METABO HPT
Scie à onglets double combinée avec laser, 10", 3800 tr/min
Format 10"x15AM
Détails
Article #37815175
Scie à onglets combinée coulissante Metabo HPT à double biseau avec marqueur laser, 10 po, 15 A icon-wishlist
METABO HPT
Scie à onglets combinée coulissante Metabo HPT à double biseau avec marqueur laser, 10 po, 15 A
Format 10"x15AM
Détails
Article #37815228

 How big of a piece of wood will it cut 

Posée par: Dave Ar
You're going to have to build a jig if you want to cut crown moulding without having to deal spring angles. And the crown moulding is going to be limited in size (5 inch tall is pushing it) due to the small saw blade and all the anchors & motors getting in the way of the cut.
Répondue par: zkool5
Date de publication: 2020-09-21

Can this saw cut threw a 4x4 in one shot without having to flip it around to cut all the way threw?

Posée par: Sandy82
for sure it cannot, not even for 3 inch
Répondue par: ronnyquetz
Date de publication: 2020-09-11

Is there a kobalt brand stand for this saw? I went to the store where I bought it and they told me no. 

Posée par: Wilson911
I made my own
Répondue par: zubs
Date de publication: 2020-05-14

Can you adjust depth of cut? (would like to use it for fretting?)

Posée par: Unkamuddy
This one has nothing that will control the depth of cut.
Répondue par: Nassir
Date de publication: 2020-08-23

will this saw cut through a 2 x 10 board?

Posée par: Postie13
It will if you turn the piece over and finish the cut by making a second cut on the other side. The question should be .. Why do you want to cut a 2 x 10 with this size of saw. This is a thin Kref saw that should be used for a more precise cut in trim and mouldings. Even then it took me about 40 minutes to adjust the saw so it would cut at 90 degrees. Buy a 10 in sliding saw if you want to cut these bigger, heavier pieces safely and more easily..
Répondue par: OldE58
Date de publication: 2020-08-15

where is the button to open up the saw

Posée par: SherryDavis2
Its located to the side where the joint is. Where it opens up.
Répondue par: may bc garden
Date de publication: 2019-02-19

can it cut 6 inches tall baseboard?

Posée par: fvbx
Yes it can cut a 6 inches tall baseboard X 1 1/2 inches thick. 
Répondue par: Elis
Date de publication: 2020-08-15

what is the max width you can cut this saw?

Posée par: fardin
From the specs: Maximum crosscut up to 2-in x 8-in (dimensional) at 90° and 2-in x 6-in at 45°
Répondue par: mikebabcock
Date de publication: 2020-02-22
  • y_2020, m_11, d_25, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_fr_CA, sid_89335003, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Scie à onglets, 7 1/4", 10 A est évalué 4.3 de 5 de 255.
Rated 5 de 5 de par Great lil' saw! As a professional furniture and cabinet maker I was tired of carrying a heavy miter saw to a job site for just a few cuts. I had looked at this saw for some time but wasn't sure of it capabilities. So finally decided to give one a try. While it appears to be a newer version I think it's an improvement over what I used to look over on the displays. Out of the box it was close to "true" but was very easy to set and I'm surprised at the accuracy. I added a my own per-scission fence and bed plus a fine cut blade ( I didn't try the stock blade so no review on that but it does appear to be a good blade). [This review was collected as part of a promotion.]
Date de publication: 2018-12-08
Rated 4 de 5 de par Portable and light yet big capacity and accurate What a Dandy little saw this is! It is exactly what I wanted! I already have a 12" chop saw that is great to keep in my shop but too heavy and bulky to drag around (even with the fancy folding stand it is on). I wanted a saw that I could throw in the back of the truck easily and take with me. I bought a non-sliding little Delta chopsaw but the capacity was terrible. This little Kobalt excels because of the slide. I did knock off a star because there is no decent carry handle for one-handed carry. Not a big deal but would've made a big difference. The laser is icing on the cake AND it is easily adjustable! What a deal! Go get one! [This review was collected as part of a promotion.]
Date de publication: 2019-05-04
Rated 5 de 5 de par The saw works pretty good and is a good price For the price, this seams like a great saw. It made my flooring job much easier! drawbacks =================== I wish it did have a slightly larger blade so I did not need to slide it as much but that is minor. The saw dust bag does not capture much dust. When I cut at 90 degrees it did not seem to be perfectly square. Maybe there is an adjustment that I need to make. advantages =================== great price had enough power to cut pretty quick. lots of degrees of movement (angle, blade angle, sliding) its not to heavy the angle is pretty east to read and adjustments are easy to make. Overall, I am happy with my purchace and am glad I got this one.
Date de publication: 2018-04-30
Rated 5 de 5 de par Great little saw Got this last week to do some projects around the house. I built some outdoor steps with it. The cuts were precise and smooth. The laser is easy to adjust. However, the laser wasn't bright enough to see with the garage door open and the sun shining in. With the garage door closed, it was fine. The blade cut smoothly and quickly. The slider was was precise and smooth. The dust collector worked great. Great little saw for the price. It won't do 4 inch thick lumber, but for anything less is great. [This review was collected as part of a promotion.]
Date de publication: 2018-08-19
Rated 5 de 5 de par Great lightweight saw I have been using this saw for about a month. I bought this to cut 2x4 framing and interior/exterior pine trim boards for my camp. Did not want to take my 12" saw back and forth from home due to weight and the hassle of dismounting/ remounting from my saw bench. This Kobalt saw was the perfect solution. When I go to help my kids at their house with a project it fits easily in the trunk of the Toyota Camry. I don't need to take the pick up truck. Only 2 shortcomings: Need to flip boards to make opposing miter cuts, and the laser could be brighter. Otherwise I think it is a good addition to my tool collection. [This review was collected as part of a promotion.]
Date de publication: 2019-09-29
Rated 4 de 5 de par good little saw for the money have a 12" slider for bigger jobs and projects. this little guy is replacing an old 10" that has seen better days and has a lot of oomph. crazy light for portability. Even though it's pretty square for most uses out of the box I would still square off the blade and fence. laser is pretty lame and extremely hard to center...mine won't center but then again I don't use lasers much...I like seeing the stopped blade touch the workpiece for better accuracy. 4 stars because im impressed so far but it's still new to me. one thing-the stock blade is ok for rough cuts but I recommend at least a 40 tooth for molding... this size blade with 24 teeth will tear a bit.
Date de publication: 2019-10-29
Rated 5 de 5 de par Five Stars to factory quality control ***** WOW This is the first time I have purchased a tool that didn't require adjustment out of the box. Kobalt listened to a lot of the complaints they had on the old unit. The laser was so close to accurate I had to get my machinist rule out. The red pointers were the only thing that needed to be tweaked since I felt like I needed to adjust something. After all the checking and ready to finally cut, I had to read further down the manual to see how to start the darn thing and finally figured out how operate that yellow safety switch.
Date de publication: 2018-04-25
Rated 5 de 5 de par Kobalt 7 1/4” I’m impressed with this “little giant great job saw!” Lightweight, easy to carry on, I don’t have to use my 12” DeWalt or 10” Makita anymore to do small remodeling projects like steps, frame, shelvings, fence boards, even laminate and hardwood floors! Excellent and perfect cut, laser works good, all is great all the way! Highly recommend! Thank you Kobalt designers! Leo. Amwall Interior Sioux Falls, SD [This review was collected as part of a promotion.]
Date de publication: 2019-01-13
  • y_2020, m_11, d_25, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_255
  • loc_fr_CA, sid_89335003, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT