• icon-wishlist
  • icon-cart
Voir tous les produits WORX

Scie à chaîne électrique Worx, 16", 14,5 A, noir/orange

N° d'article 32515017 N° de modèle WG303.1 Format 14.5AMx16"
eco
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Cette scie à chaîne électrique Worx possède un moteur de 3,5 CV permettant d'effectuer des coupes facilement. La lubrification de la chaîne est automatique et l'ajustement de celle-ci se fait sans outils. La scie est dotée d'un réservoir d'huile ayant une capacité de 6,8 oz et elle pèse 11 lb. Garantie limitée de 3 ans.

Attributs écologiques

L'utilisation d'un appareil électrique génère significativement moins de gaz à effet de serre (GES) et de polluants dans l'air qu'un modèle conventionnel à essence. De plus, l'utilisation d'un fil plutôt qu'une batterie permet de diminuer les impacts associés à sa fabrication et fin de vie.

Caractéristiques

Garantie
Limitée 3 ans
Poids
11 lb (5 kg)
Type
Scie à chaîne électrique
Ampérage
14,5 A
Voltage
120 V
Couleur
Noir/orange
Moteur
3,5 CV

Produits fréquemment achetés ensemble

CORDON DE RALLONGE icon-wishlist
WOODS
CORDON DE RALLONGE
Format 15Ax125Vx1875Wx7.5
Détails
N° d'article 4025112
Huile pour guide-chaîne et pour chaîne SAE 30, 591 ml icon-wishlist
ATLAS
Huile pour guide-chaîne et pour chaîne SAE 30, 591 ml
Format 591ML
Détails
N° d'article 80495094
Huile pour guide-chaîne et pour chaîne SAE 30, 3,78 l icon-wishlist
ATLAS
Huile pour guide-chaîne et pour chaîne SAE 30, 3,78 l
Format 3.78L
Détails
N° d'article 80495093
Huile pour scie à chaîne icon-wishlist
RECOCHEM
Huile pour scie à chaîne
Format 3.78LT
Détails
N° d'article 0263151
Huile épaisse pour scie à chaine 3,78 l icon-wishlist
RECOCHEM
Huile épaisse pour scie à chaine 3,78 l
Format 3.78LT
Détails
N° d'article 0263153
Pistolet graisseur pour scie à chaîne avec graisse, 40 ml icon-wishlist
LASER
Pistolet graisseur pour scie à chaîne avec graisse, 40 ml
 
Détails
N° d'article 0819143
Huile pour scie à chaîne icon-wishlist
RECOCHEM
Huile pour scie à chaîne
Format 3.78LT
Détails
N° d'article 0263152
Ensemble guide-lime et lime « Deluxe » pour scie à chaîne icon-wishlist
LASER
Ensemble guide-lime et lime « Deluxe » pour scie à chaîne
Format 5/32"x4.00MM
Détails
N° d'article 0819220
Coin d'abattage en plastique robuste 5" icon-wishlist
LASER
Coin d'abattage en plastique robuste 5"
Format 5"
Détails
N° d'article 0819147
Jeu d'affûtage pour scies à chaîne, 3/16" icon-wishlist
LASER
Jeu d'affûtage pour scies à chaîne, 3/16"
Format 3/16"x4.76MM
Détails
N° d'article 0819222
Lunettes de sécurité icon-wishlist
DEGIL SAFETY
Lunettes de sécurité
 
Détails
N° d'article 86575158
Protecteur auditif icon-wishlist
DEGIL SAFETY
Protecteur auditif
Format 22DB
Détails
N° d'article 8657018
Gants de mécanicien en cuir synthétique, homme, bleu/gris icon-wishlist
WORKTUFF
Gants de mécanicien en cuir synthétique, homme, bleu/gris
Format TU
Détails
N° d'article 01786083

Vous pourriez aussi aimer

Essense/huile prémélangé Husqvarna, moteur 2 temps, 946 mL icon-wishlist
HUSQVARNA
Essense/huile prémélangé Husqvarna, moteur 2 temps, 946 mL
Format 946ML
Détails
N° d'article 82305338
Scie à chaîne à essence 435, 16'', 40.9cc, icon-wishlist
HUSQVARNA
Scie à chaîne à essence 435, 16'', 40.9cc,
Format 40.9CC 16"
Détails
N° d'article 82305311
Fendeuse à bois électrique Performance Built, 5 tonnes, 120 V icon-wishlist
PERFORMANCE BUILT
Fendeuse à bois électrique Performance Built, 5 tonnes, 120 V
Format 120V
Détails
N° d'article 45935001
eco
Scie à chaîne électrique Craftsman, 12 A, 16 po icon-wishlist
CRAFTSMAN
Scie à chaîne électrique Craftsman, 12 A, 16 po
Format 12A-16"
Détails
N° d'article 22465115
Scie à chaîne électrique Craftsman, 8,0 A, 14 po icon-wishlist
CRAFTSMAN
Scie à chaîne électrique Craftsman, 8,0 A, 14 po
Format 14"-8AM
Détails
N° d'article 00277237
Tronçonneuse à essence, 440e Series, 18'' icon-wishlist
HUSQVARNA
Tronçonneuse à essence, 440e Series, 18''
Format 40.9CC 18"
Détails
N° d'article 82305309
Scie à chaîne électrique Oregon CS1500, 15 A, 18 po icon-wishlist
OREGON
Scie à chaîne électrique Oregon CS1500, 15 A, 18 po
Format 15AM-18"
Détails
N° d'article 42695000
Mélange essence/huile Husqvarna, moteur 2 temps, 1 gallon icon-wishlist
HUSQVARNA
Mélange essence/huile Husqvarna, moteur 2 temps, 1 gallon
Format 1GA
Détails
N° d'article 82305355
Scie à chaîne Husqvarna(MD) 120, 2 temps, 38 cc, 14" icon-wishlist
HUSQVARNA
Scie à chaîne Husqvarna(MD) 120, 2 temps, 38 cc, 14"
Format 38CC 14"
Détails
N° d'article 82305337
eco
Scie à chaîne compacte sans fil Craftsman, 20 V, 12 po icon-wishlist
CRAFTSMAN
Scie à chaîne compacte sans fil Craftsman, 20 V, 12 po
Format 20V
Détails
N° d'article 22465131
Essence et huile pré-mélangé 40:1 Trufuel, 3,25 l icon-wishlist
TRUFUEL
Essence et huile pré-mélangé 40:1 Trufuel, 3,25 l
Format 3.25L
Détails
N° d'article 80495161
Scie à chaîne à essence, 14", 2 temps, 33 cc icon-wishlist
POULAN
Scie à chaîne à essence, 14", 2 temps, 33 cc
Format 33CC 14"
Détails
N° d'article 82305232
Scie à chaîne à essence, 450 Rancher, Husqvarna, 20", 50,2 cc, orange icon-wishlist
HUSQVARNA
Scie à chaîne à essence, 450 Rancher, Husqvarna, 20", 50,2 cc, orange
Format 50.2CC-20"
Détails
N° d'article 82305357
Fendeuse à bois à essence et attache-remorque Performance Built, argent et noir icon-wishlist
PERFORMANCE BUILT
Fendeuse à bois à essence et attache-remorque Performance Built, argent et noir
 
Détails
N° d'article 45935000
Scie à chaîne à essence, 545 Mark II, Husqvarna, 20", 50,1 cc, orange icon-wishlist
HUSQVARNA
Scie à chaîne à essence, 545 Mark II, Husqvarna, 20", 50,1 cc, orange
Format 50.1CC-20"
Détails
N° d'article 82305358
eco
Scie à chaîne électrique 14 po icon-wishlist
REMINGTON
Scie à chaîne électrique 14 po
Format 8AMx14"
Détails
N° d'article 02225130
eco
Scie à chaine sans-fil10'' Black & Decker, 20 V 2.0 Ah icon-wishlist
BLACK & DECKER
Scie à chaine sans-fil10'' Black & Decker, 20 V 2.0 Ah
Format 20Vx10"
Détails
N° d'article 22465063
Scie à chaîne à essence, 20", 2 temps, 50 cc icon-wishlist
POULAN
Scie à chaîne à essence, 20", 2 temps, 50 cc
Format 50CC 20"
Détails
N° d'article 82305231
eco
Scie à chaîne avec pôle extensible Craftsman, 20 V icon-wishlist
CRAFTSMAN
Scie à chaîne avec pôle extensible Craftsman, 20 V
Format 20V
Détails
N° d'article 22465123
Scie à chaîne Craftsman(MD) S210 à essence, 42 cc, 14" icon-wishlist
CRAFTSMAN
Scie à chaîne Craftsman(MD) S210 à essence, 42 cc, 14"
Format 42CC-14"
Détails
N° d'article 02225425
Scie à chaîne à essence, moteur 2 temps, 42 cm³, 18" icon-wishlist
POULAN
Scie à chaîne à essence, moteur 2 temps, 42 cm³, 18"
Format 42CC 18"
Détails
N° d'article 82305300
eco
Scie à élaguer électrique 10'' Black & Decker, 6,5 A icon-wishlist
BLACK & DECKER
Scie à élaguer électrique 10'' Black & Decker, 6,5 A
Format 10"x6.5AMx9'5"
Détails
N° d'article 22465071
Scie à chaîne à essence Husqvarna, 18'', 2 temps, 45,7 cc icon-wishlist
HUSQVARNA
Scie à chaîne à essence Husqvarna, 18'', 2 temps, 45,7 cc
Format 45.7CC 18"
Détails
N° d'article 82305312
Fendeuse à bois manuelle de Toolway icon-wishlist
TOOLWAY
Fendeuse à bois manuelle de Toolway
 
Détails
N° d'article 330677781
Scie à chaîne Craftsman(MD) S230 à essence, 42 cc, 16" icon-wishlist
CRAFTSMAN
Scie à chaîne Craftsman(MD) S230 à essence, 42 cc, 16"
Format 42CC-16"
Détails
N° d'article 02225419

what is the replacement chain for this chainsaw

Posée par: crazyone
Product #054-5686-0 At Canadian tire 
Répondue par: Chainsawworks
Date de publication: 2019-07-29

Hi, can a dime tip carving bar be put on this & if so do I have to change the sprocket ? If so is there a specific madel of carving bar or will any dime tip work ( eg. Oregon ) ?

Posée par: AARRGGHH
Thank you for your inquiry. No
Répondue par: Worx Expert
Date de publication: 2020-07-26

the manual suggest to follow procedures for sharpening the chain, but there are no procedures in the manual. Are there specific instructions for sharpening this model chain?

Posée par: chaindull
Thank you for your inquiry. Before sharpening your chain be sure that your chainsaw is unplugged from the power source. The file size should be 5/32”, and we recommend the Oregon 25894 5/32” file with guide and the Oregon 27742 Depth gauge and file guide, for the best results. The chain should be sharpened at a 25-30 degree angle. If you have any further questions or concerns in regards to your tool, don’t hesitate to contact our customer service department at (1866) 354-9679. We will be happy to assist you.
Répondue par: Worx Expert
Date de publication: 2020-07-04

how do I put a chain on this kind of chainsaw??? it fell off thanks

Posée par: jules90
1. Slide the Chain in the slot around the Guide bar. Ensure the Chain is in correct running direction by comparing it to the Chain Direction Symbol found on the saw body. Ensure the Bar Tensioning Plate is facing outward. 2. Fit the Chain onto the Drive Sprocket, so that the Fastening Bar Bolt and the two Bar Locating Tabs on the Bar Clamp fit into the keyway of of the opening on the Guide Bar. 3. Check to see if all parts are seated properly. 4. Fit the Chain Cover ensure that the Chain Catch slides properly into the Chain Cover. 5. Tighten the Chain Cover by turning the Chain Tensioning Knob.
Répondue par: Worx Expert
Date de publication: 2020-07-04

today I used the chainsaw for the first time and the chain fell off. How do I get it back on?

Posée par: juels90
1. Slide the Chain in the slot around the Guide bar. Ensure the Chain is in correct running direction by comparing it to the Chain Direction Symbol found on the saw body. Ensure the Bar Tensioning Plate is facing outward. 2. Fit the Chain onto the Drive Sprocket, so that the Fastening Bar Bolt and the two Bar Locating Tabs on the Bar Clamp fit into the keyway of of the opening on the Guide Bar. 3. Check to see if all parts are seated properly. 4. Fit the Chain Cover ensure that the Chain Catch slides properly into the Chain Cover. 5. Tighten the Chain Cover by turning the Chain Tensioning Knob.
Répondue par: Worx Expert
Date de publication: 2018-11-27

what type of extension cord works with this chain saw?

Posée par: maggielucy
to determine the cord's capacity, it's important to consider the cord length along with the wire gauge. Every extra foot of cord increases the electrical resistance, which decreases the power the cord can deliver to connected devices (The longer the cord the lower the gauge to push the power from end to end.) Because of this, it's best to use a cord that is only as ling as you need. For example, it's inefficient to use a 100-foot cord to power a device that only needs to extend 40 feet from an outlet. We always recommend using 100 feet or less and never plug multiple extension cords into each other. For a 14.5 amp tool a 25-75 foot cord needs to be 14 gauges or lower. A 100 foot cord needs to be 12 gauges.
Répondue par: Worx Expert
Date de publication: 2020-07-04

Are the gears metallic?

Posée par: cede
Thank you for taking the time to ask additional questions about our product. The gears are metal. Thank you for your time and patience.
Répondue par: Worx Expert
Date de publication: 2020-07-04

Does this saw have an Oregon bar and chain?

Posée par: MrMike
Thank you for taking the time to ask additional questions on our product. Yes Oregon does produce our Worx bar and chains. Thank you for your time and patience
Répondue par: Worx Expert
Date de publication: 2020-07-04
  • y_2021, m_1, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_fr_CA, sid_32515017, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Scie à chaîne électrique Worx, 16", 14,5 A, noir/orange est évalué 4.5 de 5 de 169.
Rated 5 de 5 de par great electric saw i bought this saw after researching and reading reviews on various chainsaws. I chose to go with electric because i dont often use the saw and need it to work whenever i take it out. Most of my cutting is around the yard so the wire limitation is not an issue. My first cut is a 20 inch tree and this saw didnt have a problem going through it. The only problem i had is having to reajust the chain because the saw debries were building up and causing the chain to get loose. Beside this it was what i expected from an electric chain saw. Happy with this purchase. Ps remember to go and purchase a 50-100ft 14 gauge extension cord.
Date de publication: 2011-12-05
Rated 5 de 5 de par I'm happy I was looking for a saw to break down firewood and pallets for my back yard chiminea. This is perfect! This electric saw is powerful, clean, and quiet. There is no fuel to go bad, as often happens in 2 cycle equipment that is not used on a regular basis, or batteries to fail. This is NOT a suitable tool for cutting mountains of wood, or for use more than 25-50 feet from a good A/C outlet. I've cut around 1 1/2 cords of wood and 15-20 pallets, so far, and I'm still thrilled. The chain tensioner works great if you read and follow the instructions. I suggest pouring the chain oil back into a storage bottle if you're going to leave it sitting.
Date de publication: 2011-08-23
Rated 5 de 5 de par Excellent Chainsaw Needed a chainsaw to cut a large pine tree that had fallen into my deck and didn't want to spend a huge amount of money as I don't know if I will ever need it again. Was going to buy the Polaun 16" but the reviews were sketchy, saw this at the store and was impressed by the reviews. Chainsaw performed so much better then expected and made quick work of the tree which had a good 14" base. It is a pain dealing with the power cord, but this is normal for electric tools. If you are looking for a relatively inexpensive but powerful chainsaw, I would highly recommend this one.
Date de publication: 2012-05-29
Rated 5 de 5 de par Good Product Purchased Worx chain saw after recent wind storm damaged my tree. Money tight as it is, the chain saw price, bar and motor size, were attractive for the storm cleanup. Took the saw out of the box, read its directions, filled it with oil, and put it to work. I was impressed with the saws overall performance and its slight "kick" when started. The 14.5 amp motor displayed its value and strength when making large cuts. Keep in mind to check the oil reserve after a few minutes of operation for the saws oil capacity is not generous. Like any electric tool, take your time with it an it will perform well.
Date de publication: 2011-04-24
Rated 5 de 5 de par Got the job done I bought this chainsaw after a tree fell down in our yard. After reading reviews I bought this one. All the reviews seem to bear out that this is a good chainsaw. The only problem I had was tripping the breaker when the tree was as thick as the blade itself. If I could have found a 20 amp breaker I would not have had this problem and I plan on finding one in the future. I found out this is not for big trees, but that is not what I got it for, it sliced through 10 inch thick branches and smaller with no problem, it was when it got up to 25 inches thick that the breaker started tripping. I have never used a chainsaw before and I cut up this 50 foot tree with the help of others in two days.
Date de publication: 2011-06-27
Rated 5 de 5 de par Excellent I had a few basic level gas powered saws that I have always had trouble to keep running. After reading all of the reviews I decided to go with electric to trim up around my yard and cut a little firewood. It works great. On the second cut it went right through the extension cord like it was nothing. Watch your cord and if you do not have a GFCI outlet outside purchase a GFCI pigtail for about $30 in electrical aisle. Oh by the way, I'm a safety engineer. I'll never hear the end of this.
Date de publication: 2011-12-11
Rated 5 de 5 de par Excellent product for the Price I read reviews extensively before buying this chain saw. I picked it because of the ratings it was getting and I have to say they were correct. I cut down 3 Blue Spruce with it yesterday (1 - 30 foot, 2 - 20 Foot) and had few issues and those were caused by the user not the saw. This saw cut through and 18" diameter trunk without issues (other than having to roll the trunk for the 14" bar) IT is light and powerful, and has a 2 year warranty (Sears only has 1) I have large hands and the chain break was no problem. I'd seen other posts mentioning current draw and breaker concerns, I ran this on both 15 and 20 Amp circuits without problem. Great product!!
Date de publication: 2011-05-16
Rated 4 de 5 de par Great electic saw I bought this saw because two rather large and very old pecan trees I have in my yard started shedding some very large limbs 20 to 30 feet long and about 14" in diameter. I have had 2 electric chain saws in the past that were inferior and lasted about a year each and no where near the power of the Worx. This saw cut through those limbs like it was gas powered. The only draw back I found is that the chain has a tendency to loosen up despite the auto adjustment feature. If you don't need a heavy duty chainsaw don't waste money on the cheaper electric and go straight for this one it cost more but is well worth the difference and I think will last longer that the cheapo's
Date de publication: 2011-06-02
  • y_2021, m_1, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_169
  • loc_fr_CA, sid_32515017, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT