• icon-wishlist
  • icon-cart
Voir tous les produits GLADIATOR

Roulettes pivotantes en plastique, 5" x 1 3/4", paquet de 4

N° d'article 30005257 N° de modèle GACK04KDSX Format 4PK
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Cet ensemble pratique de roulettes Gladiator(MD) facilitera le déplacement de votre armoire GearBox modulaire et prête à assembler Gladiator(MD). L'ensemble comprend deux roulettes à blocage avant équipées d'un frein pour plus de sécurité, ainsi que deux roulettes pivotantes arrière pour assurer un roulement fluide dans différentes directions. Les roulettes s'installent facilement et sont tout aussi faciles à nettoyer. Elles sont fabriquées de plastique résistant et conçues pour supporter une charge pesant jusqu'à 300 livres.

Caractéristiques

Type
Ensemble de roulettes pour établi
Installation
Conçues pour être utilisées avec certaines armoires GearBox(MD) de Gladiator(MD)
Inclus
2 roulettes avant à blocage, 2 roulettes arrière pivotantes
Garantie
Garantie limitée de 10 ans
Emballage
Paquet de 4
Diamètre
5" (12,7 cm)
Composante
Plastique
Capacité
300 lb (136 kg)

Vous pourriez aussi aimer

Roulette pivotante sans frein icon-wishlist
MADICO
Roulette pivotante sans frein
Format 1 1/4"
Détails
N° d'article 0101132
Roulette sur plaque à usage général, 126 lb, 2" icon-wishlist
MADICO
Roulette sur plaque à usage général, 126 lb, 2"
Format 2"
Détails
N° d'article 0101197
Roulette pivotante sans frein icon-wishlist
MADICO
Roulette pivotante sans frein
Format 1 1/2"
Détails
N° d'article 0101133
Roulette sur plaque à usage général, frein, 44 lb, 1 1/2" icon-wishlist
MADICO
Roulette sur plaque à usage général, frein, 44 lb, 1 1/2"
Format 1 1/2"x44LB
Détails
N° d'article 01015307
Roulette fixe sans frein icon-wishlist
MADICO
Roulette fixe sans frein
Format 1 1/4"
Détails
N° d'article 0101201
Roulette pivotante sans frein icon-wishlist
MADICO
Roulette pivotante sans frein
Format 2"
Détails
N° d'article 0101151
Roulette pivotante sans frein icon-wishlist
MADICO
Roulette pivotante sans frein
Format 2"
Détails
N° d'article 0101195
Roulette pivotante avec frein icon-wishlist
MADICO
Roulette pivotante avec frein
Format 2"
Détails
N° d'article 0101152
Roulette fixe sans frein icon-wishlist
MADICO
Roulette fixe sans frein
Format 1 1/2"
Détails
N° d'article 0101200
Roulette fixe sans frein icon-wishlist
MADICO
Roulette fixe sans frein
Format 2"
Détails
N° d'article 0101190
Roulette jumelée à tige de friction, capacité 77 lb, 2" icon-wishlist
Roulette jumelée à tige de friction, capacité 77 lb, 2"
Format 2"
Détails
N° d'article 05515289
Roulette sur plaque à usage général, frein, 176 lb, 2 1/2" icon-wishlist
MADICO
Roulette sur plaque à usage général, frein, 176 lb, 2 1/2"
Format 2 1/2"
Détails
N° d'article 0101196
Patins à tige filetée en feutre, réglable, 7/8", 4/pq icon-wishlist
FELTAC
Patins à tige filetée en feutre, réglable, 7/8", 4/pq
Format 7/8DIx15/16DEx4PK
Détails
N° d'article 05515030
Roulette jumelée avec tige à bois, capacité 77 lb, 2" icon-wishlist
MADICO
Roulette jumelée avec tige à bois, capacité 77 lb, 2"
Format 2"
Détails
N° d'article 05515295
Roulette pivotante sans frein icon-wishlist
MADICO
Roulette pivotante sans frein
Format 3"
Détails
N° d'article 0101153
Roulette pour base de lit à tige et bande souple, 125 lb, 2" icon-wishlist
MADICO
Roulette pour base de lit à tige et bande souple, 125 lb, 2"
Format 2"
Détails
N° d'article 05515284
Roulette jumelée avec tige à bois, capacité 55 lb, 1 5/8" icon-wishlist
MADICO
Roulette jumelée avec tige à bois, capacité 55 lb, 1 5/8"
Format 1.5"
Détails
N° d'article 05515291
Roulette pivotante avec frein icon-wishlist
MADICO
Roulette pivotante avec frein
Format 2 1/2"
Détails
N° d'article 0101192
Roulette jumelée sur plaque, capacité 77 lb, 2" icon-wishlist
MADICO
Roulette jumelée sur plaque, capacité 77 lb, 2"
Format 2"
Détails
N° d'article 05515290
Roulette rigide en caoutchouc gris sur plaque, 88 lb, 2" icon-wishlist
FELTAC
Roulette rigide en caoutchouc gris sur plaque, 88 lb, 2"
Format 2"
Détails
N° d'article 01015296
Butoirs autoadhésifs, vinyle, carré, transparent, 1/2", 6/pq icon-wishlist
MADICO
Butoirs autoadhésifs, vinyle, carré, transparent, 1/2", 6/pq
Format 13MM
Détails
N° d'article 05515006
Roulette jumelée sur plaque, capacité 55 lb, 1  5/8" icon-wishlist
MADICO
Roulette jumelée sur plaque, capacité 55 lb, 1 5/8"
Format 1.5"
Détails
N° d'article 05515292
Roulette pivotante avec frein icon-wishlist
MADICO
Roulette pivotante avec frein
Format 3"
Détails
N° d'article 0101193
Roulette double à tige pour électroménager, 254 lb, 7/8" icon-wishlist
MADICO
Roulette double à tige pour électroménager, 254 lb, 7/8"
Format 7/8"
Détails
N° d'article 05515285
Roulette pivotante avec frein icon-wishlist
MADICO
Roulette pivotante avec frein
Format 3"
Détails
N° d'article 0101154

hi, i just bought the kit, i read the installation manual. it state max weight is 300lb. Is the max weight for 1 caster(4=1200lb) or 4 casters(1=75lb)? * i sent to a request to Gladiator Garage Works, but respond yet

Posée par: chan84a
I don’t think I’d want a 1,200 lb cabinet on wheels. And I would have to work very hard to place 1,200 lbs on or in one of these cabinets. I don’t think a single wheel would fail supporting 300 lbs either.  Use good judgment would be my advice.  
Répondue par: JImP
Date de publication: 2019-06-27

Can you put the casters on the 72" tall cabinet?

Posée par: DA1000
No they don't...found out first hand. You would think the " EXPERT " could have answered your question. So today I will try and return 2 sets of castors. The worst thing is I'll have to look for my receit now because I bought mine on sale quite some time ago.
Répondue par: Howie1234
Date de publication: 2019-03-02
  • y_2021, m_1, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_30005257, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Roulettes pivotantes en plastique, 5" x 1 3/4", paquet de 4 est évalué 3.3 de 5 de 35.
Rated 5 de 5 de par Extremely easy to install I'm not sure why so many people made installing these casters harder than it needed to be. There is no drilling necessary at all. The bottom of the cabinets have a sheet metal spacer with the holes welded on. You put the carriage bolts (included) into the top of the casters and then put the heads in the holes on the cabinets, slide them over to lock in the square part of the carriage bolt then tighten the nuts. Two of the casters fit one set of holes, the other two casters fit the other set of holes. It's really quite easy and only takes minutes. If in doubt, read the instructions - but don't let anyone see you;)! These are very solid!
Date de publication: 2012-01-06
Rated 2 de 5 de par Proprietary fixed wheels The casters seem to be ok quality but the two of the casters are fixed position (normally no big deal) but you can only place them in certain spots on the cabinet. So you can only move the cabinet back and forth width wise, which I needed it to move the other way in order to stow it properly in a narrow trailer. Normally you can go out and get the caster that you need, except the cabinets have non-standard bolt placements, so you cant purchase your own aftermarket casters with universal bolt placements and use the existing mounts on the cabinet. Shame on the manufacturer for making the caster mounts a proprietary way to prevent customers from putting other standard hardware on the cabinet.
Date de publication: 2016-06-02
Rated 5 de 5 de par Keep your garage stash where you want it to be [This review was collected as part of a promotion.] Casters are a superb addition to the Gladiator line; turns your small storage cabinet into a portable work area. Note: there are explicit labels and instructions for the casters; those labeled for installation on the front must be installed on the front and those labeled for installation on the rear must be installed on the rear. Some folks have reported trouble during installation but that is truly a mystery. It is a proprietary design and you cannot use casters manufactured by someone else; they will not fit.
Date de publication: 2018-09-23
Rated 3 de 5 de par Didn’t work for me. I purchased two sets of casters to use on the ready to assemble large gearboxes. The use of casters on this gearbox doesn’t appear to be an option. There were no holes in the bottom of the cabinet, so I had to use the feet that came with that gearbox. I was very disappointed because I really wanted the cabinets to be mobile. Guess I should’ve bought the gearbox that came with the casters. However, it was shorter and they didn’t have an option for all black, which is what I wanted. The casters seemed to be very well made but wouldn’t work for the cabinets I purchased.
Date de publication: 2018-04-20
Rated 1 de 5 de par Doesn't properly fit the intended product Purchased these for my GAGB28KDYG cabinet, which the website states they are for. The rear, swivel casters aligned to the pre-tapped holes in the cabinet, but the front, fixed casters did not. Front casters had a larger hole spacing. I also noticed that the pre-tapped holes in the cabinet is not a rectangular pattern, first I noticed about this. I was able to get two of the four bolts to fit on each of the front casters, but really all the bolts should be at least a 1/2" longer for a proper fit. The toughest thing about these casters was the box they came in, had to rip it to pieces to get the casters out.
Date de publication: 2020-12-07
Rated 5 de 5 de par We're rolling now! These casters add mobility to work space and that's an added plus! I can keep on the move and have a cabinet with storage right there with every step. I also read someone had a problem with mounting them. I can see where that came from. Here's my take on it. The front casters the ones with locking to prevent from rolling can only be mounted in the front. The holes line up perfectly and if you reverse them putting the front one in the back than they most likely will not line up. The other thing i did notice is if you garage floor is not some type of rubber than the caster will slide easily. Also I wanted to be sure what I read about the problem experienced was the truth before buying 2 sets. Now that I know it isn't I just purchase another set. Other than that this is another great Gladiator product. I just wished I would have bought two set.
Date de publication: 2015-01-20
Rated 5 de 5 de par Excellent! I nearly didn't buy the product after reading the other reviews, but really needed my GearBox to be mobile. Each caster has 4 holes, which line up with the 4 threaded holes on the bottom of the GearBox. Ten minutes and 16 small 7/16 head bolts (included) later and the box is mobile.
Date de publication: 2011-06-30
Rated 1 de 5 de par Not For Sale [This review was collected as part of a promotion.] I bought the casters to add to the Gladiator cabinet I was purchasing (72 x 36 x 18). They Are NOT designed to work on this cabinet because of the floor design.
Date de publication: 2018-12-09
  • y_2021, m_1, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_fr_CA, sid_30005257, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT