• icon-wishlist
  • icon-cart
Voir tous les produits MULTINAUTIC

Quai en boîte « QP 427 » de 4' x 8' en aluminium

Article #70615092 Modèle #21111 Format 4"x8"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Quai en boîte « QP 427 » de 4' x 8' en aluminium

icon-wishlist

Description

Le quai en boîte « QP 427 » de Multinautic(MC) est un système de quai sur pieux combinant solidité, légèreté et versatilité. Le design unique utilisé pour ses longerons apporte plus de résistance tout en demeurant très léger et facile à installer. Doté de l'extrusion spéciale Unitrack(MC) de Multinautic(MC), il vous permet d'installer et déplacer à volonté des taquets et accessoires sans devoir percer le platelage. Il s'agit d'un ensemble complet incluant deux pieux de 6', deux plaques de fond, adaptateurs et quincaillerie en acier inoxydable. Une fois assemblé le quai mesure 4' x 8'. La garantie est de 1 an contre les défauts de fabrication.

Caractéristiques

Modèle
QP-427
Composante
Aluminium
Largeur
4 pi (1,22 m)
Longueur
8 pi (2,44 m)
Garantie
1 an

Vous pourriez aussi aimer

Plaque de renfort de 2 1/2" x 6" x 3/16" icon-wishlist
MULTINAUTIC
Plaque de renfort de 2 1/2" x 6" x 3/16"
Format 2"x7"x3/16"
Détails
Article #7061014
Coin intérieur de 3" x 7" x 3/16" icon-wishlist
MULTINAUTIC
Coin intérieur de 3" x 7" x 3/16"
Format 3"x3"x7"x3/16"
Détails
Article #7061015
Cordes de défense, 5', noir, paquet de 2 icon-wishlist
DOCK EDGE +
Cordes de défense, 5', noir, paquet de 2
 
Détails
Article #330610389
Flotteur de quai, Howell 250 lb, 2 pi. x 4 pi. x 8 po. icon-wishlist
DOCK EDGE +
Flotteur de quai, Howell 250 lb, 2 pi. x 4 pi. x 8 po.
 
Détails
Article #330610399
Pare-choc pour quai « Multinautic » icon-wishlist
MULTINAUTIC
Pare-choc pour quai « Multinautic »
Format 25'
Détails
Article #7061016
Échelle sans soudure ECO, 5 marches, gris icon-wishlist
DOCK EDGE +
Échelle sans soudure ECO, 5 marches, gris
 
Détails
Article #330610412
Cordes de défense, 5', blanc, paquet de 2 icon-wishlist
DOCK EDGE +
Cordes de défense, 5', blanc, paquet de 2
 
Détails
Article #330610390
Flotteur de quai noir à flottabilité de 750 lb icon-wishlist
MULTINAUTIC
Flotteur de quai noir à flottabilité de 750 lb
Format 24"x60"x16"
Détails
Article #70615037
Plaque de renfort de 2 1/2" x 5" x 1/8" icon-wishlist
MULTINAUTIC
Plaque de renfort de 2 1/2" x 5" x 1/8"
Format 2"x5"x1/8"
Détails
Article #7061018
Échelle sans soudure en aluminium ECO, 3 marches icon-wishlist
DOCK EDGE +
Échelle sans soudure en aluminium ECO, 3 marches
 
Détails
Article #330610413
Luminaires solaire à condensateur StarliteMC, gris icon-wishlist
DOCK EDGE +
Luminaires solaire à condensateur StarliteMC, gris
 
Détails
Article #330610391
Coin intérieur pour quai «Multinautic» icon-wishlist
MULTINAUTIC
Coin intérieur pour quai «Multinautic»
Format 6"x5"x1/8"
Détails
Article #7061001
Plaque de renfort pour quai, 5"x5" icon-wishlist
MULTINAUTIC
Plaque de renfort pour quai, 5"x5"
Format 5"x5"x1/8"
Détails
Article #70615120
Renfort à taquet de 8" à 10", acier galvanisé icon-wishlist
MULTINAUTIC
Renfort à taquet de 8" à 10", acier galvanisé
Format 2"x5"
Détails
Article #70615044
Support de poteau externe pour quai flottant, 2,75" icon-wishlist
DOCK EDGE +
Support de poteau externe pour quai flottant, 2,75"
 
Détails
Article #330610400
Butoir à face plane, aluminium, 24', blanc icon-wishlist
DOCK EDGE +
Butoir à face plane, aluminium, 24', blanc
 
Détails
Article #330610424

Are the deck boards easily removable at the end of the season to take the dock out of the water? Or do they need to be permanently attached to the frame? Thanks

Posée par: Ray Bass Lake
Entirely your decision to make. Weight with boards installed is not an issue and the only screws attaching decking to frame (six on each section) are easily removed, if necessary. I will not be removing from frames unless maintenance is required. BTW: I used cedar decking and it looks amazing!
Répondue par: Walleye World
Date de publication: 2019-05-30

How is the dock anchored for inclement weather- it may not an issue but we have a shallow sandy landing in a smaller lake.

Posée par: JagmanB
For sandy bottom drive the polls in about 1 foot and place a couple cement blocks over the polls to hold the feet in place. This will work for most situations.
Répondue par: FishinMusician
Date de publication: 2019-05-29

Can I park a 19 foot boot on this dock ?? Is it strong enough?

Posée par: Dannag88
Hello Dannag, This dock has been design to be ultralight to ease the installation and winterising operations. A aluminum stationary dock is not made to withstand lateral pressure that a boat can put to its structure. Also, when the boat will move under wave action, the dock lines will pull on the fixed dock. so it's good for temporary mooring but when your away you must moor it on a boat lift or away from the dock, on its own anchorage.
Répondue par: Your Multinautic Expert
Date de publication: 2019-05-23

Does this dock come with the decking?

Posée par: Stevehannah
It doesn’t. But it’s very easy to install. It could be pressure treated, cedar, composite or other 
Répondue par: Johnny18
Date de publication: 2019-05-21

Are there pre-drilled holes in the legs for adjustments or are the clamps just tighten around the legs?

Posée par: ShoeyRB
Hello Shoey, The posts are easily adjustable at dock height with 1/2" hex bolts. There are also bolts on base plates to pound the pile in the ground. So the post can be adjust at ground level when installing the dock in spring depending on muddy or hard bottom.
Répondue par: Your Multinautic Expert
Date de publication: 2019-04-09

Kit appears to come with one pair of poles/legs. How do multiple sections connect? How much 5/4 x 6" decking is required per section?

Posée par: Oliver Breuer
Just a note to give the right length of the 2 posts: they are 6 ft. long. (72 in.) each.
Répondue par: Multinautic Tech Team
Date de publication: 2019-03-26

Hi, can the 4x8 sections be joined together to make a 8x8 dock (patio area dock)?

Posée par: Aruba
Good morning Aruba, yes QP-427 can be installed side-by-side but only 2 posts are included in each box. This dock kit has been designed to have a first section starting from shore, with the 2 posts at the other end, in the water. So if you want to have your dock near the shore you will be able to lay them on shore then add the posts at the other ends. Note that with another section installed as a gangway to the platform, you will have all the legs that you'll need. If you need more legs to install it as a stand alone deck you will have to get 2 more posts with an outside diameter of 1 11/16". Every Multinautic steel posts have this diameter. If you don't want it too high, you can also cut the 6 ft. long included posts. In one box, you will find a lateral adaptor for side-by-side layout. Getting 2 boxes gives you the pair that you will need to connect. If you need more information, please don't hesitate to contact our technical team at 1-800-585-1237.
Répondue par: Your Multinautic Expert
Date de publication: 2019-03-26

Hi there. What is the difference between this dock and your QP400 dock kit(21011)?

Posée par: Mike 0412
Hello Mike, QP-400 (#21011) & QP-427 (#21111) are part of the 400 Series Ultralite Aluminum Boxed Docks. Both models include 2 posts (6’), base plates, adaptors for straight, "L" or side-by-side layouts and a 4’ x 8’ aluminum structure to assemble. As they are installed on posts, you may install as many sections as you need. You may also add wheel kits for easy removal for winter. QP-400 aluminum sides extrusions have a "C" channel to insert the decking planks for a nice finish. QP-427 aluminum extrusion have tracks to allow easy installation of mooring cleats with special "T"-head bolts (both sold separately), instead of having to pierce the decking. It also allows you to easily change the location of the cleats to fit your needs. All you need to complete both dock assembly is the decking material (you may use the new kind of treated wood but we recommand cedar). For more information and a short assembly video, visit www.multinautic.com. Thanks for choosing Multinautic!
Répondue par: Your Multinautic Expert
Date de publication: 2019-07-13
  • y_2019, m_11, d_12, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_fr_CA, sid_70615092, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 4ms
  • QUESTIONS, PRODUCT
Quai en boîte « QP 427 » de 4' x 8' en aluminium est évalué 4.5 de 5 de 6.
Rated 5 de 5 de par Went togeather with no fitting problems. I have only had the dock a short time but it seems to be great. It was a little more work to build than I thought, but nothing serious. It is very sturdy and looks great.
Date de publication: 2018-07-30
Rated 4 de 5 de par Easy to install I bought this in May. Was super easy and lite weight, one person can do it. Just check with company for any design changes or accessories, to ensure they work.
Date de publication: 2017-07-04
Rated 5 de 5 de par Great Price An improvement over the previous model. It is light and easy to put in and take out of water.
Date de publication: 2018-08-01
Rated 4 de 5 de par Easy Assembly I bought this kit for a fixed doc at the cottage. I needed something relatively light weight I could put in and out of the river every year. This is an easy assembly kit. I bought the cedar boards separately and cut and placed them in the doc frame. All good so far.
Date de publication: 2019-07-02
Rated 5 de 5 de par Worth the money The dock sections are easily put together thely are good value for the money
Date de publication: 2019-06-06
Rated 4 de 5 de par Très bien pour le prix. Cela fait 3 ans que j’ai mon quai sur la rivière Magog. Comme cela ne gèle pas, je n’ai pas besoin de l’enlever, l’alluminium est plus mince que les grosses compagnies, mais je n’ai pas à m’en plaindre pour le prix en moin. Le 427 a des glissières pour pouvoir déplacer facilement les encrages sans faire de trou, bon, pas cher, facile à monter,
Date de publication: 2019-04-14
  • y_2019, m_11, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_fr_CA, sid_70615092, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms
  • REVIEWS, PRODUCT