
Description
Valve de contrôle du débit d'eau sans renversement.
Vous pourriez aussi aimer
Is it fit Model 1042LH Legacy Humidifier?
The solenoid in question is for an AirKing 5000/6000 not a Genaire so it probably wont work on a Genaire. Best to get a sokenoid designed for the Genaire.
Date de publication: 2018-11-27
No water is coming out. What can it be?
No water coming out. Green light is on. Solenoid clicks. Water flow is working..
Date de publication: 2018-11-25
What voltage?
24vac 750 mA
Date de publication: 2018-09-26
Will this work with general air model 1041 thanks.
Hello will this work with a Aprilaire 550 whole house humidifier?
Please provide full specifications such as 24 Volt AC, Orifice size input and output and hole distance etc.
Valve d'humidificateur «Solenoid» est évalué
de
5 de
12.
Rated 1 de
5
de
Abax par
Defective part included..broke while installing
It looked good, but wouldn't stop leaking around the input tube. I tried using plumbers tape, substituting parts...tightening, loosening..Everything. Finally I accidentally overtightened it too much and broke the plastic end off at the fitting.
When I took it all apart I noticed that the inner sleeve did not have a hole through it ! and had been blocking the water flow completely off. Due to the difficulty of access, this defective part cost me 3 wasted hours and a waste of about $75. I ended up using the solenoid from the new broken valve with the plastic valve part of the old valve and it still buzzes as bad as ever, which was why I was replacing it. Not a happy camper at all.
Date de publication: 2022-02-06
Rated 4 de
5
de
Willyb par
Worked Fine. Except
If your Humidifier has a black hose running from the Solenoid Valve to the Evaporating Element, keep using it. Don't replace it with the white plastic line that comes with this new valve. The white plastic line is harder and will break the push in fitting at the top of the Evaporating Element. Ask me how I know.
My old Solenoid Valve was Brass with 1/8 npt fittings on both the inlet and outlet. My supply line was copper and the black hose connected to the outlet using a 1/8” push on nipple to 1/8” npt.
The new Solenoid Valve is all plastic with integral Compression fittings. They only supply one compression nut and ferrule so you will need a second one if your old supply line won’t work. I replaced my copper supply line with a plastic one.
Date de publication: 2021-01-14
Rated 5 de
5
de
Pat S par
Perfect Fit - Easy Replacement
Bought to replace the original style solenoid valve. Exact fit and finish made it easy to swap out. All the included parts fit properly although I did not use the hose. For a fresh end I just trimmed 1/2" off the existing black hose to the humidifier as it seemed to be a bit more pliable. The last one I bought worked for many years so hopefully this one does as well.
Date de publication: 2021-03-05
Rated 4 de
5
de
HMVR par
I bought the part a month ago and has worked properly since it was installed. The installation itself was not as simple as it should have been. I installed the valve in no time at all but after the water was turned on the valve did not operate. The problem turned out to be the metal orifice provided for the outlet side of the valve. When I used the orifice from the original valve everything worked properly.
Date de publication: 2018-02-12
Rated 5 de
5
de
David Mozer par
Works Great
I installed this myself; took approximately 1 hour due to lack of experience doing this kind of thing; Had to adjust the water flow so that it did not overpower my water pump that catches the overflow and that took a little time to get it just right. Now works and works well.
Date de publication: 2018-02-04
Rated 4 de
5
de
Jay Bird par
Works.
Solenoid works. The flow restriction does not work however. When I place my valve on full flow it floods my humidifier. I am adjusting flow using a saddle valve, which is isn't meant to do. The in line flow restriction that came with this package was supposed to do that.
Date de publication: 2022-03-04
Rated 5 de
5
de
WhiteDog par
Works as it should.
Easy on and off repair, took about 10 minutes from start to finish. Before you buy one check to make sure the hole in the little nipple thing that is in the outlet hose isn't plugged. I'm pretty sure that was all that was wrong with mine.
Date de publication: 2021-02-06
Rated 1 de
5
de
TOM73 par
not very good
This is the second valve i bought.The first one lasted only for 5 months and the second did not work after installing.I can,t even return it now because of the virus.
Date de publication: 2021-01-23