
Supports de jardin Panacea en acier noir, 4/pqt
N° d'article 37335109
N° de modèle 89584
Format PK4
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Garantie
Limitée d'un an
Description
Obtenez des coins droits et robustes de murets de jardin de qualité professionnelle avec ces supports de jardin. Fabriqués en acier revêtu de poudre noire, ils ont un design attrayant et sont faciles à installer. Ces supports ont une hauteur de 12 po et une largeur de 6 1/2 po. Ils sont vendus en paquet de 4 et sont couverts par une garantie d'un an contre les défauts de fabrication et ses composants.
- Un jeu de 4 supports en acier permet de créer un lit de jardin surélevé
- Les supports permettent d'assembler deux pièces de bois de 2 po x 12 po ou de 2 po x 6 po
- Les trous prépercés dans le support permettent de les fixer solidement
Caractéristiques
Largeur (mm)
41,402
Largeur (po)
1.63
Largeur (cm)
4,1402
Longueur (cm)
11,43
Famille de couleurs/finis
Noir
Hauteur (cm)
29,845
Hauteur (po)
11.75
Hauteur (mm)
298,45
Longueur (po)
4.5
Longueur (mm)
114.3
Couleur/fini du fabricant
Noir thermolaqué
Matériau
Acier
Quantité par emballage
4
Empilable
Non
Type
Joint d'angle
Garantie
Limitée d'un an
Produits fréquemment achetés ensemble
Supports de jardin, acier, noir, 4/pqt est évalué
de
5 de
7.
Rated 5 de
5
de
MikejJ par
Happy with the purchase
Bought a few weeks ago and installed one set a few days ago. These appear to be good quality and make it easy to create a raised garden bed. The only note is that they are not for rough cut lumber; therefore I had to hammer out the lips in them to fit. You can't get any cheap ones and I think these will last quite a while.
Date de publication: 2024-05-03
Rated 2 de
5
de
Shdh par
Cheap but they don’t fit
They don’t fit 2” lumber. They fit nominal “2 inch” construction lumber, but who builds a garden bed with that?
Date de publication: 2022-11-06
Rated 4 de
5
de
@AJay par
Elegant corners
I bought these to cap the corners on my raised garden beds. I don’t think they would be substantial enough to hold a large bed together. Anything larger than a 4’x4’ would probably require reinforcements on the corners. That being said, they really helped finish the corners on my 10’x4’ bed. I had some warped boards that were difficult to deal with, but the corners help conceal any gaps.
Date de publication: 2022-10-25
Rated 5 de
5
de
No user name par
Garden brackets
The worked perfectly, used outdoor wood screws instead of what came with kit.
Date de publication: 2022-04-20
Rated 3 de
5
de
CaptainTrips par
Does the job
I used these to construct a 10' x 4' x 1' garden box using 2 x 6s. They work okay. I built the box in the driveway and then intended to carry it to the site where it was going, but decided that the sheet metal corners would not survive being carried without reinforcement. I nailed some temporary 1 x pieces across the corners to keep them stiff while I handled the frame. My set turned out to be a return, with some of the screws missing. I used my own screws anyway because the screws that came in the kit were too short. Overall, does the job, but pricey for what you get.
Date de publication: 2022-04-13
Rated 5 de
5
de
Anonyme par
Great
Will stiffen up the walls of my raised garden beds and add some nice visual appeal.
Date de publication: 2020-11-02
Rated 4 de
5
de
Stefano par
Nice Brackets; What’s With the Screws?
Ordered these a couple of weeks ago for pickup at my local Rona. I happened to have a few treated 2 x 6 around and everything fitted as it should and they look nice and modern in black. But each bracket has eight holes on each side which means you need 64 screws but they only give you a bag of 16! I bought two sets of four brackets and still only had enough screws for 2 brackets! Luckily I had some (better quality) screws of my own.
Date de publication: 2020-06-07