Pistolet agrafeur ultra-robuste « SharpShooter » est évalué
Rated 1 de
lightweight but lightweight......
Haven't had the stapler that long and I had problems with the lever getting stuck and not being able to return to its normal position of ready. Instead it did nothing. Tried everything then I pulled out the staples and the whole thing feel apart. I went to YouTube and there is a lot of the same on this stapler. Even how to repair. Unfortunately there were none on how to try and put it back together and let me tell you there is a plethora of parts. So I ams sending it to the warranty center to see if it gets replaced.
Date de publication: 2020-02-03
Rated 4 de
Good tool for occasional usage
I have this stapler for 10 years or so. It works very well and I don't remember the case when the staples were jammed in the tool. So, you can work uninterrupted.
The only wish I have is to increase the penetrating power of this tool.
Even set to the maximum power (in "+" position), it often does not drive steples into the soft wood such a pine fully. I have never use the "-" setting.
Date de publication: 2020-03-21
Rated 2 de
Stapler 6 TR150HL
Good when it fires
The stapler doesn't fire right away. If it staples it works good. Although something must be wrong. Sometimes you depress the lever and after a few seconds it will fire. Sometimes you can back off a little on the handle after depressing and it will fire. Sometimes it just won't fire. It never fires right away. When you have a lot of staples set it just takes way too long. I had to go back to using a really cheap stapler I already had.
Date de publication: 2021-03-17
Rated 1 de
Awful stapler broke second time I used it
I thought because this stapler is made of aluminum that it might be better quality. Not a chance. The thing jammed up the second time I used it and it completely broke. Gave it to a handy friend to try to fix it and he said no way. Stay away from this terrible Stanley product.
Date de publication: 2021-01-02