• icon-wishlist
  • icon-cart
Voir tous les produits JORGENSEN

Serre mâchoire JORGENSEN parallèle 24 po

N° d'article 19225206 N° de modèle 8024 Format 24"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Les pinces Jorgensen sont idéales pour les assemblages de panneaux plats, de boîtes, d'armoires, de cadres et de panneaux ou tout autre projet nécessitant une équerrage ou une pression appliquée uniformément. De grandes mâchoires en plastique assurent la répartition de la pression de serrage sur de grandes surfaces. Les mâchoires restent parallèles pour assurer l'équerrage et empêcher les pièces de s'incliner ou de se soulever. Le support de pince intégré permet aux pinces de se tenir debout pour une utilisation à une main et un réglage de la tête coulissante plus facile/plus rapide. La tête coulissante peut être inversée sur la barre et la pince fait alors office d'écarteur. Les faces de serrage sont de 3-3/4 po. hauteur et 1-7/8 po. largeur, la barre en acier à haute teneur en carbone est de 1-3/16 po. x 3/8 po, la vis est de 5/8 po. Limite de charge de 1 500 lb.

Caractéristiques

Couleur
Orange
Composante
Tôle estampée
Capacité
Charge maximal de 1500 lbs
Type
Mâchoire Parallèle

Vous pourriez aussi aimer

Ensemble de 4 mini serres, Irwin Quick, résine icon-wishlist
IRWIN
Ensemble de 4 mini serres, Irwin Quick, résine
Format ST4
Détails
N° d'article 0244224
Serre-joint icon-wishlist
QUICK-GRIP
Serre-joint
Format 6"
Détails
N° d'article 0244139
Serre à coulisse icon-wishlist
IRWIN
Serre à coulisse
Format 24"
Détails
N° d'article 02445120
Serre-joint Jorgensen extensible orange, paquet de 4 icon-wishlist
JORGENSEN
Serre-joint Jorgensen extensible orange, paquet de 4
Format 4PK
Détails
N° d'article 19225208
Serre-joints Pony de 4 po, paquet de 3 icon-wishlist
Serre-joints Pony de 4 po, paquet de 3
Format 4" 3/PK
Détails
N° d'article 19225192
Serre-joint icon-wishlist
IRWIN
Serre-joint
Format 12"
Détails
N° d'article 0244080
Serre à angle Wolfcraft, relâche rapide, mâchoires en acier, poignée ergonomique icon-wishlist
QUICK-JAW
Serre à angle Wolfcraft, relâche rapide, mâchoires en acier, poignée ergonomique
Format 90DG
Détails
N° d'article 1137078
Serre à coulisse icon-wishlist
QUICK-GRIP
Serre à coulisse
Format 36"
Détails
N° d'article 02445155
Jeu de serre-joints extensibles en acier Pony, 2x 6 po, 2x 12 po icon-wishlist
Jeu de serre-joints extensibles en acier Pony, 2x 6 po, 2x 12 po
Format 4MX
Détails
N° d'article 19225195
Serre à coulisse icon-wishlist
IRWIN
Serre à coulisse
Format 6"
Détails
N° d'article 0244079
Serre-joint à coulisse en acier Quick-Grip d'Irwin, système de verrouillage, bleu, 18 po de capacité de serrage icon-wishlist
IRWIN
Serre-joint à coulisse en acier Quick-Grip d'Irwin, système de verrouillage, bleu, 18 po de capacité de serrage
Format 18"
Détails
N° d'article 02445448
Serre-joint à coulisse en acier Quick-Grip d'Irwin, poignée ergonomique, système de verrouillage, capacité de 6 po icon-wishlist
IRWIN
Serre-joint à coulisse en acier Quick-Grip d'Irwin, poignée ergonomique, système de verrouillage, capacité de 6 po
Format 6"
Détails
N° d'article 02445447
Serre à courroie Wolfcraft, courroie de nylon, mâchoires en plastique amovibles, courroie de 13 pi icon-wishlist
WOLFCRAFT
Serre à courroie Wolfcraft, courroie de nylon, mâchoires en plastique amovibles, courroie de 13 pi
Format 1"-13'
Détails
N° d'article 1137189
Serre à coulisse icon-wishlist
QUICK-GRIP
Serre à coulisse
Format 24"
Détails
N° d'article 02445153
Serre-joint à sangle Wolfcraft, autoréglable, résine, bouton à dégagement rapide icon-wishlist
WOLFCRAFT
Serre-joint à sangle Wolfcraft, autoréglable, résine, bouton à dégagement rapide
Format 9.9x12.25x2.25"
Détails
N° d'article 1137066
Serre de coin, menuiserie, aluminium coulé sous pression icon-wishlist
KC PRO
Serre de coin, menuiserie, aluminium coulé sous pression
 
Détails
N° d'article 0033055
Pince-étau en « C » icon-wishlist
VISE-GRIP
Pince-étau en « C »
Format 11 1/4"
Détails
N° d'article 0244027
Serre en C, KC Pro, 2" x 1" icon-wishlist
KC PRO
Serre en C, KC Pro, 2" x 1"
Format 2X1"
Détails
N° d'article 0033113
Serre icon-wishlist
IRWIN
Serre
Format 4"
Détails
N° d'article 0244199
Serre-joint icon-wishlist
IRWIN
Serre-joint
Format 48"
Détails
N° d'article 0244228
Serre en C icon-wishlist
KC PRO
Serre en C
Format 4X3"
Détails
N° d'article 0033117
Serre à machoire, 2" icon-wishlist
KC PRO
Serre à machoire, 2"
Format 2"
Détails
N° d'article 0033067
Serre en C icon-wishlist
KC PRO
Serre en C
Format 2 1/2X2 1/2"
Détails
N° d'article 0033115
Serre en C icon-wishlist
KC PRO
Serre en C
Format 3X2"
Détails
N° d'article 0033116
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Serre mâchoire JORGENSEN parallèle 24 po est évalué 4.8 de 5 de 228.
Rated 5 de 5 de par SOLID AND DEPENDABLE [This review was collected as part of a promotion.] I wanted to add 18" length to my inventory of parallel-jaw bar clamps. The Jorgensen Cabinet Master fit the bill and was competively priced. The clamp is well built with comfortable easy-grip handles, and the jaws slide easily along the sturdy bar. A few twists of the handle apply ample clamping pressure, and the jaws are remain true when holding the work piece securely. The only quibble is there is a bit of manipulation needed to get the handle alignment just right to slide the moving jaw into place making one-handed adjustment awkward. (Every woodworker could use an extra hand, or two, on occasion.)
Date de publication: 2021-05-02
Rated 5 de 5 de par Custom Cabinets Best Friend! They say you can never have too many clamps and I've tried to take that adage to heart in my shop. But, the truth is, when push comes to shove... I'm always reaching for my Jorgensen parrallel bar clamps. Stout, Sturdy and Versatile Jorgensen are my go-to clamp! I can always depend on them helping to keep things square and putting the pressure where it's needed. They are even more useful when I run out of hands-on a tricky assembly because I can evn get them in position and clamped with only one hand. So; I say,"You can never have too many Jorgensen clamps!" "Please Sir, May I have another?" :-D
Date de publication: 2021-04-29
Rated 5 de 5 de par Best parallel clamps I've used.. [This review was collected as part of a promotion.] The Cabinet Master clamps are the best parallel clamps I have used over the years. Other manufacturers have good clamps but the Jorgensen clamps are superior in my opinion. I have a few sets of different lengths so can handle both large and smaller projects. One difference that shines for me is the clamping surface area of the heads are larger than the competitors giving me more confidence during my glue ups. The locking mechanism itself has never failed me and is easy and smooth to set in place. They are also rugged which is perfect in a workshop where they see lots of use. I would recommend Cabinet Master parallel clamps without hesitation.
Date de publication: 2021-04-29
Rated 1 de 5 de par Locked in closed position I bought three of these clamps. Two work fine, but one is locked in the closed position. No matter how I twist the handle, I can't get the body of the clamp to move down the bar. I've looked for any kind of manual or support material and have found nothing online. I'll have to return this to the store. I'm tempted to return all three, as this seems to be a design flaw the other two may be susceptible to.
Date de publication: 2021-06-18
Rated 5 de 5 de par Impressed [This review was collected as part of a promotion.] Impressed at the he quality and holding strength. This tool will out live me and easy to operate with one hand. The plus is it stands on it's side without any accessories.
Date de publication: 2019-12-17
Rated 5 de 5 de par Parallel Cabinet clamps [This review was collected as part of a promotion.] I enjoy using my parallel clamps for large tabletop glue ups. I even started to purchase smaller versions so that I can use them for smaller projects. My one feedback if I had to make a change on the features is that I wish there was a way to keep them with a set distance. What do I mean? When I remove the clamp the jaw immediately slides down to meet the head of the clamp. If I have my hand there it’ll be a painful moment. Solution take clamps when they are laid down instead when they are in the vertical position but that’s not always the way I position the clamps.
Date de publication: 2021-11-16
Rated 5 de 5 de par Easy to use, pretty good quality [This review was collected as part of a promotion.] This will be a useful tool to have in the shop. Works well, not too cumbersome to use, and can help tackle some of the bigger cabinetry projects that I have ahead of me. I think that the quality is fine for what this tool is and was what I expected from the price.
Date de publication: 2021-01-26
Rated 5 de 5 de par A very sturdy tool [This review was collected as part of a promotion.] I received the Cabinet Master 90 degree parallel jaw bar clamp from TryIt Sampling in exchange for my honest review. My review is based on my experience only and my opinion only. The first thing I noticed about this is how big and sturdy this is. I can tell this is a very good quality tool. The tool appears to be in great shape, great quality and feels like it can handle many projects. The clamp came packaged up very nice as well. I would buy this company again, and this is a great addition to my tool collection.
Date de publication: 2021-01-23
  • y_2022, m_1, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_228
  • loc_fr_CA, sid_19225206, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 54ms
  • REVIEWS, PRODUCT