• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Scie circulaire légère DeWalt, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 9/16 po, portative

N° d'article 00275540 N° de modèle DWE575 Format 7 1/4"x15AM
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Finalisez votre projet à l'aide de cette scie circulaire légère de 8,8 lb de marque Dewalt. Son souffleur de poussière assure votre visibilité pendant la coupe. Cette scie circulaire puissante DWE575 de 15 ampères est idéale pour les projets difficiles. Son protège-lame inférieur à roulement à billes anti-coincement lui procure une meilleure durée de vie. Sa base durable en aluminium permet à cette scie circulaire de 5200 tr/min de couper avec précision.

Caractéristiques

Inclus
Lame 7 1/4" à pointes au carbure, clé de lame
Angle
57°
Ampérage
15 A
Tours par minute
5200
Capacité de coupe
2 9/16"
Butée
22,5° et 45°
Dimensions de la lame
7 1/4"
Garantie
3 ans limitée
Capacité du biseau
57°
Source d'alimentation
Électrique

Produits fréquemment achetés ensemble

Cordon de rallonge électrique, 12/3, 25', rouge icon-wishlist
WOODS
Cordon de rallonge électrique, 12/3, 25', rouge
Format 12/3 25'
Détails
N° d'article 74045239
Adaptateur pour protection DDFT portative, 1800 W, 15 A icon-wishlist
YELLOW JACKET
Adaptateur pour protection DDFT portative, 1800 W, 15 A
 
Détails
N° d'article 32045050
Lisière à 6 prises, protection contre surtensions, 6', jaune icon-wishlist
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053

Vous pourriez aussi aimer

Scie circulaire sans fil 7 1/4 po XR Dewalt, 20 V, 5500 tr/min, sans balais, poignée sur le dessus icon-wishlist
DEWALT
Scie circulaire sans fil 7 1/4 po XR Dewalt, 20 V, 5500 tr/min, sans balais, poignée sur le dessus
Format 7 1/4"x20V
Détails
N° d'article 00276299
Scie circulaire sans fil 6 1/2 po DeWalt de 20 V avec frein et semelle en magnésium, 5150 tr/min, biseautage 50°, légère icon-wishlist
DEWALT
Scie circulaire sans fil 6 1/2 po DeWalt de 20 V avec frein et semelle en magnésium, 5150 tr/min, biseautage 50°, légère
Format 6 1/2"x20V
Détails
N° d'article 00275733
Scie circulaire sans fil 6 1/2 po Craftsman, 20 V, 4000 tr/min, biseautage 50°, poignée sur dessus icon-wishlist
CRAFTSMAN
Scie circulaire sans fil 6 1/2 po Craftsman, 20 V, 4000 tr/min, biseautage 50°, poignée sur dessus
Format 6 1/2"x20V
Détails
N° d'article 00276539
Scie circulaire Makita, 7 1/4 po, moteur de 15 A, 5800 tr/min, capacité de coupe de 2 1/2 po, poignée caoutchoutée icon-wishlist
MAKITA
Scie circulaire Makita, 7 1/4 po, moteur de 15 A, 5800 tr/min, capacité de coupe de 2 1/2 po, poignée caoutchoutée
Format 7 1/4"x15A
Détails
N° d'article 11975178
Scie circulaire à base en acier Skil, 7 1/4 po, moteur de 13 A, capacité d'inclinaison de 53°, gâchette de sécurité icon-wishlist
SKIL
Scie circulaire à base en acier Skil, 7 1/4 po, moteur de 13 A, capacité d'inclinaison de 53°, gâchette de sécurité
Format 7 1/4"x13AM
Détails
N° d'article 19835935
Scie circulaire sans fil 6 1/2 po Makita de 18 V, 3700 tr/min, biseautage 50°, légère icon-wishlist
MAKITA
Scie circulaire sans fil 6 1/2 po Makita de 18 V, 3700 tr/min, biseautage 50°, légère
Format 6 1/2"x18V
Détails
N° d'article 11975318
Scie circulaire filaire Craftsman, 7 1/4 po, moteur de 13 A, 5300 tr/min, capacité de coupe de 2 1/2 po icon-wishlist
CRAFTSMAN
Scie circulaire filaire Craftsman, 7 1/4 po, moteur de 13 A, 5300 tr/min, capacité de coupe de 2 1/2 po
Format 7 1/4"
Détails
N° d'article 00276556
Scie circulaire, 6 1/2'', 18 V icon-wishlist
BOSCH
Scie circulaire, 6 1/2'', 18 V
Format 6 1/2"x18V
Détails
N° d'article 19835519
Scie circulaire hybride 1/4 po de 36 V Metabo HPT MultiVolt, légère, souffleur, frein électrique icon-wishlist
METABO HPT
Scie circulaire hybride 1/4 po de 36 V Metabo HPT MultiVolt, légère, souffleur, frein électrique
Format 7 1/4"x36V
Détails
N° d'article 37815189
Scie circulaire filaire Makita, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 1/2 po, lumières à DEL intégrées icon-wishlist
MAKITA
Scie circulaire filaire Makita, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 1/2 po, lumières à DEL intégrées
Format 7 1/4"x15A
Détails
N° d'article 1197280
Scie circulaire filaire Skil, 7 1/4 po, moteur de 15 A, clé de serrage multifonctions, base en magnésium icon-wishlist
SKIL
Scie circulaire filaire Skil, 7 1/4 po, moteur de 15 A, clé de serrage multifonctions, base en magnésium
Format 7 1/4"x15A
Détails
N° d'article 19835715
Scie circulaire avec frein électrique Makita, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 3/8 po, lampe DEL icon-wishlist
MAKITA
Scie circulaire avec frein électrique Makita, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 3/8 po, lampe DEL
Format 7 1/4"x15A
Détails
N° d'article 1197142
Ensemble de 4 outils 20 V sans fil XR DeWalt, batteries et chargeur, moteur sans balais, lumière DEL, vitesse variable icon-wishlist
DEWALT
Ensemble de 4 outils 20 V sans fil XR DeWalt, batteries et chargeur, moteur sans balais, lumière DEL, vitesse variable
Format 20V
Détails
N° d'article 00276301
Scie circulaire sans-fil 6 1/2 po Makita, 18 V, moteur sans balais, lithium-ion, biseautage 50° icon-wishlist
MAKITA
Scie circulaire sans-fil 6 1/2 po Makita, 18 V, moteur sans balais, lithium-ion, biseautage 50°
Format 6 1/2"x18V
Détails
N° d'article 11975400
Scie circulaire filaire Makita, 7 1/4 po, moteur de 10,5 A, 5200 tr/min, grande capacité de coupe, légère icon-wishlist
MAKITA
Scie circulaire filaire Makita, 7 1/4 po, moteur de 10,5 A, 5200 tr/min, grande capacité de coupe, légère
Format 7 1/4"x10.5AM
Détails
N° d'article 11975350
Scie circulaire filaire Craftsman, 7 1/4 po, moteur de 15 A, 5500 tr/min, capacité de coupe de 2 1/2 po icon-wishlist
CRAFTSMAN
Scie circulaire filaire Craftsman, 7 1/4 po, moteur de 15 A, 5500 tr/min, capacité de coupe de 2 1/2 po
Format 7 1/4"
Détails
N° d'article 00276554
Scie circulaire avec aluminium Metabo HPT, 7 1/4 po, moteur de 15 A, 6000 tr/min, capacité de coupe de 2 7/16 po icon-wishlist
METABO HPT
Scie circulaire avec aluminium Metabo HPT, 7 1/4 po, moteur de 15 A, 6000 tr/min, capacité de coupe de 2 7/16 po
Format 7 1/4"x15AM
Détails
N° d'article 37815203
Scie circulaire à fil de 7 1/4 po Bosch, moteur de 15 A, 5500 tr/min, socle en magnésium, biseau ajustable icon-wishlist
BOSCH
Scie circulaire à fil de 7 1/4 po Bosch, moteur de 15 A, 5500 tr/min, socle en magnésium, biseau ajustable
Format 7 1/4"x15A
Détails
N° d'article 1983224
Scie circulaire 7 1/4 po DeWalt, 20 V, Power-Detect, moteur sans balais, lithium-ion, biseautage 57° icon-wishlist
DEWALT
Scie circulaire 7 1/4 po DeWalt, 20 V, Power-Detect, moteur sans balais, lithium-ion, biseautage 57°
Format 7 1/4"x20V
Détails
N° d'article 00277274
Scie circulaire Strong Arm sans fil 18 V Profactor de Bosch, lame de 7 1/4 po icon-wishlist
BOSCH
Scie circulaire Strong Arm sans fil 18 V Profactor de Bosch, lame de 7 1/4 po
Format 7 1/4" 18V
Détails
N° d'article 31785002
Scie circulaire à fil avec frein 7 1/4 po DeWalt, moteur de 15 A, capacité de coupe de 2 9/16 po, légère icon-wishlist
DEWALT
Scie circulaire à fil avec frein 7 1/4 po DeWalt, moteur de 15 A, capacité de coupe de 2 9/16 po, légère
Format 7 1/4"x15AM
Détails
N° d'article 00275734
Scie circulaire Flex 24 V sans fil, 7 1/4 po, batterie, chargeur et sac de transport inclus icon-wishlist
FLEX
Scie circulaire Flex 24 V sans fil, 7 1/4 po, batterie, chargeur et sac de transport inclus
Format 7 1/4"x24V
Détails
N° d'article 32165115
Scie circulaire pour métal Bare Bosch, 18 V Lithium-Ion, 5 3/8 po icon-wishlist
BOSCH
Scie circulaire pour métal Bare Bosch, 18 V Lithium-Ion, 5 3/8 po
Format 5 3/8"x18V
Détails
N° d'article 19836106
Ensemble de scie circulaire sans fil Bosch 6 1/2 po avec batterie 18 volts et chargeur, verrouillage, base en aluminium icon-wishlist
BOSCH
Ensemble de scie circulaire sans fil Bosch 6 1/2 po avec batterie 18 volts et chargeur, verrouillage, base en aluminium
Format 6 1/2"x18V
Détails
N° d'article 19836292

Can it be used to cut concrete with a diamond blade?

Posée par: HenryL
https://www.lowes.ca/circular-saws/dewalt-dwe575-15-amp-7-14-in-lightweight-corded-circular-saw_g1324257.html?pfmwidg=coord_itm#
Répondue par: Jangir
Date de publication: 2018-06-24
  • y_2021, m_11, d_28, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_fr_CA, sid_00275540, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Scie circulaire légère DeWalt, 7 1/4 po, moteur de 15 A, capacité de coupe de 2 9/16 po, portative est évalué 4.5 de 5 de 91.
Rated 4 de 5 de par Good Saw Ran out and purchased this DeWalt circular saw to replace an old Craftsman saw that I'd had about 20 years. Craftsman not being what it used to be, I usually buy DeWalt as replacements. This saw seems as good, maybe a little less power but the biggest issue I have with virtually all new circular saws is the fact that the motor sits so low you can't use a speed square to cut a 90, you have to use a framing square if you need a near perfect cut, which is a hassle. The saw won't pass over the upturn of a speed square so unless you're ambidextrous, have extra appendages and/or are polydactyl, enjoy trying to cut a square edge with these new saws.
Date de publication: 2013-12-31
Rated 3 de 5 de par MISALIGNED PLATE - 2nd one works great [This review was collected as part of a promotion.] Bought this saw and took it home, clamped a straight edge to a piece of plywood to test cut before using and after about 6 inches the saw would become very hard to push and blade would start burning the wood and until it would become impossible to push. Measured distance from each edge of the blade to edge of the base plate and saw/motor was not aligned with the base plate. You could not use it to cut a line along a straight edge. Returned saw and the blade it ruined for the same model and second one was square and cuts perfect. Just make sure you test it prior to using. Was very tempted to replace with another brand...
Date de publication: 2019-09-06
Rated 5 de 5 de par extremely nice circular saw After replacing all my old Craftsman power tools with Dewalt, I had one more item on my list, which was the circular saw. Things are made so much nicer now and Dewalts quality speaks for itself. I use this circular saw for cutting down larger sheets of plywood for a variety of my woodworking projects. I did however, replace the blade with a Freud Diablo blade after reading many great reviews on the internet. The saw, along with the blade, cuts like butta! I combined this saw with the Kreg Rip Cut to make the cutting of plywood super easy. I would definitely recommend this saw.
Date de publication: 2013-04-16
Rated 5 de 5 de par Great Features Great Quality! My wife bought this for me for a Christmas gift. I was very happy with the features, such as, paddle locks on adjustments, detents for the popular angle settings, spindle lock for blade changes, rubber chord support to prevent chord wear at the body and the solid base that has square edges right to the bottom for using straight edges that are thin. My old saw was a stamped metal base that was rounded on the corners and after getting accidentally bent was impossible to true back up to the blade and flatten. This solid plate style base and cast angle setting bracket is a much more solid and accurate construction. Nice design and quality.
Date de publication: 2016-12-27
Rated 5 de 5 de par Dewalt - Do I need to say more? I have a Skill saw that is fine but I could never cut well with it. The cut never comes close to lining up with the guide. Its old but has served its purpose. Then I saw this new lightweight Dewalt saw. I happen to also have received a discount coupon in the mail from Lowes - couldn't turn it down. I recently bought a Dewalt power screwdriver and it is amazing! This saw cuts extremely well. The guides are right on! It actually does have electric braking but not instant. The blade wrench snaps in the back near the cord and works as expected. The saw runs very smooth and is lightweight as advertised. I too wish it had come with a 24 tooth blade but since they are only $10 I bought one for it (Dewalt of course). Oh my, does it make a nice cut. I am very glad I bought this saw. Next up for Dewalt replacement is my combination miter saw...
Date de publication: 2012-09-15
Rated 5 de 5 de par Great saw OK. A little background on what I do. I am not just an average DIY'er or homeowner. I am a construction professional by trade and I do this for a living. It supports my family and I and is not just a hobby. I have used hundreds of circular saws over the past 20 years and so far this saw and the Makita 5007MG are hands down better than any other saw on the market. I lost faith in Dewalt after the DWS780 but only re-gained faith in their saws (except for sliding miter saws) and drills after their DWD210G drill and this saw have both impressed me. WEIGHT: This saw weighs just 8.8 pounds-force at sea level. It is the lightest professional-grade circular saw on the market. Yes, some 7-1/4" saws weigh less but they are not professional-grade. ACCURACY: I have never purchased any piece of equipment that didn't require final adjustments. The factory settings are usually quite good out of the box. However, if you have to turn out superior work, each tool will require setup and adjustments over time. Taking the time to go through the process provides you with knowledge of how to make the adjustments. It also allows you to understand when something is not right. The manual is well-written and relatively easy to understand. I used a 4x4 pine beam to check/adjust the bevel. I found that by adjusting the indicator out of the box it is easier to achieve a more accurate and repeatable angle adjustment. POWER: This saw is 2.6 horsepower. It has a very high power-to-weight ratio, but lower than that of the Makita 5007MG or the Milwaukee 6390. I personally think that Dewalt could have made this saw 2100 watts, or 2.8 horsepower by adding some more rotor/stator laminations. SPEED: This saw has 5200 RPM no-load blade speed (NOT MOTOR SPEED!!), which is more than adequate for general construction work. However, I think that along with a bigger motor, they could have increased the blade speed to 5600 RPM. This also increases cut capacity as the gear on the motor shaft would be slightly bigger, pushing the blade shaft slightly downward. CUTTING HEIGHT: This saw will cut 2-9/16" deep at 90 degrees, which is the deepest out of any corded 7-1/4 inch circular saw on the market. This is great because we often cut I-joists that are 2-1/2 inches thick and using our 5007F saws we always had 1/8" that was left un-cut. SAFETY SWITCHES: This saw does NOT have a safety switch, meaning you pull the trigger and away it goes. Professional users will appreciate it. Homeowners and DIY'ers will want to unplug it if they have little hands around. SHOE: The shoes on five of the six DWE575's I received were perfectly flat. The shoe is extruded aluminium and will not bend easily if subjected to a drop. Cheap circular saws use stamped steel, which distorts over time and adversely affects the performance of such a saw. GUARD: The blade guards on some saws (like the 5007F) snag whenever you try to make any kind of bevel, miter, or compound cut. This saw had a nice guard that never snags on anything. Conclusion: This saw is by far the best circular saw that weighs (at sea level) less than 10 pounds-force. I learned a lot about reading the various reviews, especially the writers who complained about things that are not really part of the saw. 90% favorable reviews to 10% critical reviews only proves you can't make everyone happy. If you need or want this saw, buy this one.
Date de publication: 2015-10-27
Rated 3 de 5 de par Base plate issues I purchased the saw to rip plywood and sheet rock for a remodel project. I have tried to exclusively purchase DeWalt because I like the products. I returned the saw after two days for a couple reasons. First, the base plate has no vertical ridge to slide along a fence for cutting plywood, etc. The base continued to slide under the fence and after two ruined cuts I reboxed it and returned it. Second, there is no safety switch to engage before you pull the switch to start cutting. Not a big deal but a safety issue for me. I did like the fact it had a locking mechanism to hold the blade while you were loosening the bolt to change blades. I said "No" to recommendation only because there wasn't a third option.
Date de publication: 2020-09-20
Rated 5 de 5 de par I love my new saw! I had been looking for something better than my outdated Craftsman battery operated circular saw. As soon as I plugged it in to try it out, I loved it. All the power that never stops, solid, sturdy construction. So far it’s given me reliable cuts every time. Rips right through maple with ease. Only weird thing about it is that the side that the majority of the plate is on makes it feel like it should be a left handed saw? But it has a right handed knob to hold in the front I think. Either way, I can work around that part, I love it otherwise.
Date de publication: 2021-01-25
  • y_2021, m_11, d_28, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_91
  • loc_fr_CA, sid_00275540, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT