Voir tous les produits
PYLEX
Description
Support de banc. Pour construction de banc sur patio, balcon, quai, etc. 40 po x 16 po x 2 1/2 po. Simple et facile d'installation, utilise seulement 5 po d'espace de plancher sur le patio. Vis d'installation comprises. En acier. Noir. Aussi offert dans les couleurs kaki et cèdre.
- N'utilise que 5 pouces de l'espace de la terrasse
- Ajoutez une jolie touche finale aux terrasses
- L'enduit de poudre cuite offre une excellente résistance à la rouille
Caractéristiques
Garantie
Limitée de 5 ans
Quantité par emballage
1
Description de modèle
Banc bracket noir
Famille de couleurs/finis
Noir
Vous pourriez aussi aimer
PYLEX
Limon en aluminium, 6 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645160
PYLEX
Limon en aluminium, 5 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645159
Support réglable pour patio, 3x3 à 6x6'', acier, noir
Format 3x3"-6x6"
Détails
N° d'article 80645132
SPYTEK
Base de fixation 44 Pylex en acier 4 po x 4 po noir
Format 4x4"
Détails
N° d'article 80645099
SIMPSON STRONG-TIE
Sabot d'armature pour abri d'auto Simpson Strong-Tie, acier galvanisé, calibre 14, 5 7/16 po L. x 5 5/8 po l.
Format 6x6"
Détails
N° d'article 85895074
PYLEX
Limon en aluminium, 7 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645161
SIMPSON STRONG-TIE
Sabot d'armature pour abri d'auto Simpson Strong-Tie, calibre 14, acier galvanisé à chaud, 3 7/16 po L.
Format 4x4"
Détails
N° d'article 85895075
PYLEX
Limon en aluminium, 4 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645158
SIMPSON STRONG-TIE
Embase de poteau réglable ABA de Simpson Strong-Tie, calibre 14, à l'unité, 5 1/2 po l.
Format 6"x6"
Détails
N° d'article 35945328
SIMPSON STRONG-TIE
Renforts de clôture Simpson Strong-Tie E-Z Mender - Calibre 12
Format 3.825"x28"x2.225"
Détails
N° d'article 35945185
PYLEX
Limon en aluminium, 4 marches, 7,5" x 10,25", blanc
Format 7.5x10.25"
Détails
N° d'article 80645151
PYLEX
Limon en aluminium, 3 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645157
PYLEX
Limon en aluminium, 6 marches, 7,5" x 10,25", blanc
Format 7.5x10.25"
Détails
N° d'article 80645153
PYLEX
Limon en aluminium, 5 marches, 7,5" x 10,25", blanc
Format 7.5x10.25"
Détails
N° d'article 80645152
SIMPSON STRONG-TIE
Demi-base de poteau ZMAX de Simpson Strong-Tie, calibre 18, 3 1/2 po de large x 2 21/32 po de long
Format 4"x4"
Détails
N° d'article 35945343
PYLEX
Limon en aluminium, 2 marches, 7,5" x 10,25", noir
Format 7.5x10.25"
Détails
N° d'article 80645156
do these come with the screws and or bolts?
Yes
Date de publication: 2020-11-21
How many do you need ie: 16 inch center 24"?
Hello Sir,
You will need one every 24" maximum span.
Anything else, please let us know.
Thanks
Date de publication: 2019-07-11
How would you do the corner if you wanted to wrap the bench around the deck L shape.
Hello Sir,
The easiest way is to finish the boards at 90 degree without any angle cut.
The nicest way is to cut the boards at an combined angle just like the picture : http://pylex.com/content/photos/14300_Image_P1.jpg
More difficult but look nicer.
Anything else, please let us know.
Thanks
Date de publication: 2019-02-12
Is there a weight limit for the bench?
Hello,
We do recommand to use one Bench every 24", if properly installed with provided screws, the load bearing capacity is 150 lbs per brackets.
Anything else, please let us know.
Thanks
Date de publication: 2018-08-21
Max distance between brackets?
24" according to the Pilex website.
Date de publication: 2018-02-19
What is the maximum depth of the final bench "seat"? Based on all of these bracket products all of the bench seats look fairly narrow and uncomfortable.
Support de banc est évalué
de
5 de
8.
Rated 1 de
5
de
Ott_res par
Garbage lag bolts, poorly engineered
Bought these today, bought all the wood, cut and build supports under the deck and then came installation of the brackets. I was using my impact driver and sheared a bolt head. Ok, I switch to a drill, again sheared off...ok switched to a screwdriver SHEARED OFF. More zinc than steel I think.
Secondly, the angles are not 90 degrees so you need to tighten them quite a bit to get them level, unfortunately, the junk hardware can't even withstand torque from a screwdriver so that's not happening unless you replace all the hardware, bring your cost up quite a bit.
These are going back
Date de publication: 2019-06-30
Rated 5 de
5
de
HappyChappy par
Easy to install and functions as advertised
All parts came with the brackets. Installation was very quick and rock solid.
In hindsight, if I could have used 8" boards for the back instead of 6" I think it would have looked nicer.
Date de publication: 2016-11-24
Rated 4 de
5
de
Somerlee par
Does it's job
The brackets did their job. Easy install and feels pretty sturdy. Used my left over deck board 5x10, they could be a little wider for more butt room but that's OK.
Date de publication: 2021-07-01
Rated 4 de
5
de
Jackie4 par
Back support better than similar plastic brackets
We bought this bracket after reading that the plastic one was harder to get a drill into the areas with the holes.... this was was straight forward. I feel it's more sturdy than the plastic one and like that it has the built in back support feather than having to cut a 2x4 for each one.
Date de publication: 2017-08-24
Rated 5 de
5
de
Deckbackyard par
Worked great.
I installed the bench brackets about 1 month ago and they work great.
Date de publication: 2017-08-14
Rated 3 de
5
de
Mitch 122 par
Not quite right
I found they were not square and almost impossible to get straight. If you use a level on the back the seat will be crooked and vice versa. The back is very upright and can be a bit uncomfortable because the bench is not very deep. They look good and the hardware they came with was adequate. It would be nice if the seat part was a bit deeper as fitting 2 2x6 boards in with a 1 inch gap is very difficult.
Date de publication: 2020-06-16
Rated 4 de
5
de
DYIer53 par
Quick delivery. I ordered 21 brackets and 4 of them cane with a different style of hardware.... dark grey instead of black.... requiring a large Robertson head ( which I had to buy) instead of a hexagonal bolt driver which the others needed. Three of the largest screws twisted off during installation.... a proper pain!
The finished deck benches are very sturdy and look fabulous.
Date de publication: 2020-09-04
Rated 4 de
5
de
Sneuf par
Love
Exactly what we were looking for, the bolts that come with have rusted after just a couple weeks so do suggest using different ones
Date de publication: 2019-07-09
LIENS PRATIQUES
Services aux consommateurs
Circulaire
◊Achat en ligne
Livraison express
Déclaration relative à la vie privée
Conditions d'utilisation
Exclusivités web
Politique de prix
Plan de protection
Retours et remboursements
Livraison des électroménagers
Informations sur les promotions
Aide et FAQ
Contactez-nous
Trouvez un magasin
Retours et commandes
À propos de RONA
