Voir tous les produits
METABO HPT
Ponceuse à courroie Metabo HPT 120 V 9 A
N° d'article 330938111
N° de modèle SB8V2M
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Description
La ponceuse à courroie ponce les surfaces en bois et métalliques, finit les revêtements de sol, prépare les surfaces pour la peinture, enlève la rouille et la vieille peinture et finit les matériaux de maçonnerie tels que l'ardoise et le béton.
- Moteur de 9 A, 1020 W offrant une puissance accrue pour les travaux de ponçage les plus difficiles
- Contrôle de vitesse variable à la base de la poignée pour diverses applications et une meilleure maniabilité
- Le couvercle transparent améliore la visibilité lors du ponçage le long d'une surface
- Le sac de collecte de poussière réduit les particules en suspension dans l'air et maintient la zone de travail propre
- Couvert par une garantie professionnelle limitée de 5 ans
Caractéristiques
Pieds/minute (maximum) (pi)
1475
Poids (lb)
9,5
Longueur du cordon (pi)
8
Garantie sur les pièces du moteur
60
Ampérage
9
Garantie de base sur la main-d'oeuvre
60
Garantie de base sur les pièces
60
Nombre minimum de pieds/minute (pi)
820
Garantie sur la main-d'oeuvre du moteur
60
Voltage (volts)
120
Type de boîtier/coffret
Aucun étui inclus
Accessoires inclus
Oui
Nombre de trous
0
Sans balais
Non
Commande de vitesse électronique
Oui
Nom de la gamme
S.O.
Pile comprise
S.O.
Avec fil/sans fil
Non
Gestion de la poussière
Oui
Type
Ceinture
Type de papier
Bande abrasive de 3 po x 21 po
Vitesse maximale de ponçage
820 à 1475 orbite/min
Caractéristique principale pour la publicité / Affiche no 1
Moteur de 9 A, 1020 W offrant une puissance accrue pour les travaux de ponçage les plus difficiles
Caractéristique principale pour la publicité / Affiche no 2
Vitesse variable avec 5 réglages qui permet un contrôle de la vitesse pour diverses applications
Sans cordon
Non
Tension de batterie
S.O.
Ponceuse à courroie Metabo HPT 120 V 9 A est évalué
de
5 de
167.
Rated 2 de
5
de
pcdrums par
Look elsewhere
Tracking is lousy. Constantly adjusting, have to keep an eye on it instead of focusing on the work.
Date de publication: 2024-06-15
Rated 5 de
5
de
EdKOrlando par
Terrific tool
This Metabo sander replaced an ancient Porter Cable tool. The variable speed control is excellent, and it is much lighter than the old tool without sacrifice of sanding effectiveness.
Date de publication: 2024-06-12
Rated 1 de
5
de
GerryInThe6ix par
Worked for about an hour - then fell apart!
I was attracted to this sander based on its 5 year warranty. I bought the Metabo to sand down a 12x12 deck. At first, I was quite pleased how well it worked. The Metabo ate through wood with ease and seemed well made. Unfortunately, after about a hour of intermittent use, and just as I was finishing up the fourth six-inch wide plank, the rear rubber roller flew off! Turns out the roller isn’t as sturdy as it looks. It is made of hollow plastic that broke off the centre spindle with use. I returned the sander in store hoping to pick something in store so I could save what was left of the weekend. Unfortunately my local Rona store only had cordless sanders in stock so I ended up buying a cheap disposable sander at a competitor for half the price - and finished the job! So disappointing.
Date de publication: 2024-06-09
Rated 4 de
5
de
Warsh par
Very good medium duty sander
I use this sander primarily on southern treated wood for decks and works very well as long as I let the weight of the sander do the work. The belt does not travel once the alignment is adjusted.
Date de publication: 2024-06-05
Rated 5 de
5
de
At Odds with Wood par
Metabo sander
In the market for a corded sander and found out the options are limited. Initially purchased a Craftsman and returned it the next day. The deciding factor was the fact that the rollers were the same size on front and back allowing for a smoother finish while sanding. Sander works very well and since its corded no need to buy expensive batterys.
Date de publication: 2024-03-25
Rated 5 de
5
de
Michael D par
Happy
A very nice sander for the price. I am very pleased with this sander. I do not have a lot of time on this unit yet, but seems very well made. I have an Hitachi cordless drill that I have had for years, and if this sander is an example of Hitachi quality, it should last a long time.
Date de publication: 2024-03-20
Rated 4 de
5
de
MkeMike par
3x21 Belt Sander
This seems like a nice sander but has a few unusual design features. The cord coming out of the top makes it difficult to turn sander upside down. The metal platten under the belt was poorly formed and required bending to make the belt sit flat. I prefer the in-line sander designs as these with the belt/ motor housing sticking out the side are prone to tipping easier but this was the only sander I could find in my area? I was able to finish my project with the sander, just a few annoying features.
Date de publication: 2024-02-01
Rated 5 de
5
de
Ecky par
Accomplished job very well!
Initial use for sanding oak floors close to walls and difficult areas
Date de publication: 2023-12-17