Voir tous les produits
DREMEL
Petite perceuse à colonne, porte-outil rotatif et support d'arbre flexible DREMEL 220-01 WorkStation
N° d'article 332032615
N° de modèle 220-01
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
Retour sans problème
90 jours pour retourner ou échanger dans son état et son emballage original.
Lire la politique de retour
Garantie
Limitée d'un an
Description
La station de travail Dremel 220-01 est un outil 3-en-1 ; il s'agit d'une perceuse à colonne, d'un porte-outil rotatif et d'un support à outils Flex Shaft. La Workstation est la solution parfaite pour les projets stationnaires utilisant votre Dremel. Percez verticalement ou dans n'importe quel angle, réglable par incréments de 15 degrés. Tenez l'outil horizontalement, jusqu'à 90 degrés ; polir des objets métalliques, poncer différentes formes ou meuler des pièces métalliques. La station de travail est dotée d'un support Flex Shaft intégré permettant des réglages télescopiques à n'importe quelle hauteur entre 16 et 29 pouces. Le rangement intégré des accessoires permet de garder vos embouts rotatifs organisés et les clips de gestion des cordons offrent un rangement sûr pour les cordons d'alimentation. La base métallique robuste avec 4 points de serrage maintient solidement votre pièce à travailler, tandis que les marquages en pouces et métriques de la base fournissent des mesures précises.
- Perceuse à colonne articulée - perce des trous perpendiculaires et angulaires par incréments de 15 degrés, jusqu'à 90 degrés à l'horizontale
- Porte-outil - maintient l'outil à 90 degrés d'horizontalité pour des tâches telles que le polissage d'objets métalliques, le ponçage de différentes formes et le meulage de pièces métalliques
- Support d'outils à arbre flexible - permet un réglage télescopique entre 16 et 29 pouces de hauteur
- Le nid de pie permet de ranger les mèches, les clés et autres accessoires Dremel
- Clips de gestion des cordons d'alimentation - pour un rangement sûr des cordons d'alimentation
- Marquage en pouces et en mètres sur la base - pour un perçage précis de la pièce à usiner
Caractéristiques
Garantie
Limitée d'un an
Type
Ponçage et guide de meulage
Pays d'origine
Chine
Petite perceuse à colonne, porte-outil rotatif et support d'arbre flexible DREMEL 220-01 WorkStation est évalué
de
5 de
198.
Rated 1 de
5
de
Lee 3D par
Does not work with an 8260
I bought an 8260 recently and this was the first accessory purchased to go with it. They are not compatible without forcing the rotary tool and damaging it or the workstation in doing so.
Date de publication: 2024-01-02
Rated 5 de
5
de
Bee1 par
Like a third hand
[This review was collected as part of a promotion.] I bought this for precise work. It’s like having a third hand to help you get the project just right.
Date de publication: 2023-12-05
Rated 5 de
5
de
Fallenangelks par
A must for crafters
[This review was collected as part of a promotion.] This has allowed me to precisely drill into projects that I've been working on without added stress of wondering if I'm going to make the whole and the correct spot.
Date de publication: 2023-12-04
Rated 5 de
5
de
BlaiseW par
Good for micro work
[This review was collected as part of a promotion.] I use this thing all the time when I need to drill micro holes in something and also can turn 90 ° to make it a tool holder
Date de publication: 2023-11-21
Rated 5 de
5
de
Keltab par
Super useful, steady, and stable!
[This review was collected as part of a promotion.] Just like you want your spouse to be! This is a very reliable addition to my carving tool family. It especially helps with my low vision/depth perception challenges. My work is better, and my fingers are safer!
Date de publication: 2023-09-29
Rated 5 de
5
de
Tommy10Speed par
More than just a Drill Press
[This review was collected as part of a promotion.] I bought this for use as a drill press and it is great for that. I can drill into beads, shells, stones, etc. along with other materials such as wood, plastic, or metal with very small bits that will not work in my standard drill press. The fact that the "press" comes assembled with the gearing, springs, and lever inside of a protective case means that you do not have to mess around with it to make it work.
The workstation also allows for the rotary tool to be held stably at up to a 90-degree angle while I use both hands to hold a workpiece for buffing or sanding.
The workstation will also allow the tool to be hung while using the flexshaft for carving or grinding instead of vibrating off of my work bench.
Date de publication: 2023-09-25
Rated 5 de
5
de
Rugalator Ray par
Great quality
[This review was collected as part of a promotion.] Bought this with the expectations of gettin a 4300 Dremel tool to install permanently in it. Been wanting this since I discovered it existed.
Have lots of projects awaiting it's use.
Date de publication: 2023-09-22
Rated 5 de
5
de
Copter Doctor par
Very useful for small an detailed work
I've had this work station for so long that I forgot when I bought it. It's been at least 10 years. Making clamps and fences for it is easy and really adds to it's capability. I mounted mine to a piece of 3/4" plywood, as I have done with other similar size tools in my small workshop. The ply wood bases fit in a slot in my workbench.
Keep the tool close to the piece you are working on! The tool tip should be no more than 1/4" from the piece you are working on. Don't force it. Let the tool work at it's own speed. With the right jigs, you aren't limited to just drill bits. When you get used to the work station and setting the correct tool speed, you can do a lot, including sanding and edging.
Next, I'm getting the plunge router base.
Date de publication: 2023-07-20