
Description
Utilisez cette perceuse électrique Dewalt pour forer et pour réaliser des mélanges. Elle est dotée d'un réglage de vitesse variable de 0 à 500 tr/min et permet de réduire l'apparition de bulles d'air lors des mélanges. Cette perceuse à manche en forme de bêche a une poignée souple pour la portabilité et le confort. La légèreté de l'appareil permet d'accroître la productivité des utilisateurs en réduisant la fatigue.
Caractéristiques
Inclus
Poignée latérale à 3 positions, clé pour mandrin, poignée arrière à 2 positions
Source d'alimentation
Électrique
Mandrin
1/2"
Vitesse
Variable
Tours par minute
0 à 500 tr/min
Garantie
Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours
Ampérage
9 A
Type
Électrique
Produits fréquemment achetés ensemble
Vous pourriez aussi aimer
Perceuse 1/2 po VVR à prise en T et mandrin à clé DeWalt, moteur 9 A, 550 tr/min, 120 V est évalué
de
5 de
36.
Rated 5 de
5
de
Travis par
14 faithful years of mixing thinset :)
[This review was collected as part of a promotion.] Bought a used DW130V 14 years ago from Home Depot's rental department. It just started messing up yesterday 9/19/18. I install tile professionally, and use this drill almost daily to mix thinset and floor patch. It will even mix three 80lb bags of quickcrete at a time with ease. Lots of power in this drill. If you need a tool to mix or one that simply has an extraordinary amount of power, this is what you want. No need to shop for a cheaper brand or model. I just hope they haven't changed a thing from how they manufactured it all those years ago. Bought another one today.
Date de publication: 2018-09-20
Rated 5 de
5
de
Craig par
Simply the right tool for the job
I'm not a contractor, but am in the middle of a year long remodel. While mixing thinset for the 5th time in a day, I had a 10amp Dewalt corded drill burn up in my hand. When I went to replace it, I found cheaper, higher amp drills, but do yourself a favor and RESIST THE TEMPTATION. If you mix thinset and joint compound, this drill is specifically designed for it...not high speed (only 500 rpm), and has TORQUE for days. It can also handle being under load for long periods of time (2 minutes+ continuous). I know it's not the cheapest option, but it's definitely the best in the long run. Trust me.
Date de publication: 2017-12-27
Rated 5 de
5
de
Jason par
Only drill to use to mix thinset
I burned up a cordless drill and a cheap Skillset drill (smoke was literally coming out of the second one) attempting to mix thinset for a tiling project. Finally upgraded to this one and it handled the job with ease. It's expensive, but you'll never have to buy another one.
Date de publication: 2013-07-01
Rated 3 de
5
de
Glass1 par
chuck and key quality has changed
been using this model drill for years at our glass factory, they have always been up to the task. with in the last year or so they have changed the chuck and key to a much lower quality. now that is the first part that wears out for us.
Date de publication: 2018-10-15
Rated 5 de
5
de
FELICIMO par
Probable the best tool I ever have purchased.
I was greatly satisfied by what this DW130V Mud Mixer provided. Have used it on mixing bags of 80lbs of concrete and mortar mix without any difficulty, had save my time, money and lengthy process than having to rent a portable machine mixer or a motorized one. Its has been very good tool, probably the best tool I ever had.
Date de publication: 2015-05-29
Rated 5 de
5
de
ForneyTx par
I should have bought it sooner!
I've always wanted to buy this but did not want to spend the money. After burning up a few drills mixing mud I took the plunge. Should've done it YEARS ago! Don't hesitate. Save up, and pull the trigger. You'll get the best mix of mud with a paddle mixer you've ever had. Worth every penny!
Date de publication: 2014-08-11
Rated 5 de
5
de
alan par
Great mixing drill
[This review was collected as part of a promotion.] I burned through a regular corded Dewalt drill, but I'd had that one for about 15 years now. Knowing I would be doing a good amount of mortar & grout, I opted for this one & it is fantastic! Good low speed & no concern that I might burn this one out, it has tourque to keep on going. Well worth it!
Date de publication: 2019-01-21
Rated 5 de
5
de
drc4466 par
This is a good drill for the price. In electrical work you need a high torque drill for drilling in wood. This drill handled the job well and the handle is interchangeable.
Date de publication: 2013-12-01