Voir tous les produits
ATLAS
Description
Fixez la lame sur les supports avant de votre tracteur et transformez votre tracteur en pelle à neige. Le réglage de changement d'angle rapide vous permet de déplacer la lame de 30 degrés vers la gauche ou la droite. Compatible avec les tracteur MTD à plateforme NX15. S'utilise aussi avec le plateau de coupe de 42" de Troy-Bilt, Cub Cadet, Yard Man, MTd, MTD Gold, Yard Machines et Columbia.
- Convient aux modèles Cub Cadet XT1
- Réglage manuel de l'angle de la ligne droite à 25 degrés vers la gauche ou la droite
- Patins réglables
- Retour de la lame par ressort
Caractéristiques
Poids (lb)
67 lb
Poids (kg)
30.3912 kilogrammes
Matériel d'installation inclus
Oui
Convient aux modèles
Tracteurs
Hauteur de la lame (cm)
30,48 centimètres
Hauteur de la lame (po)
12 pouces
Hauteur de la lame (mm)
304,8 millimètres
Largeur de la lame (cm)
116,84 centimètres
Largeur de la lame (po)
46 pouces
Largeur de la lame (mm)
1168.4 millimètres
Compatibilité marque/modèle
701971, 651727, 651708, 701970
Famille de couleurs/finis
Noir
Usage commercial ou résidentiel
Résidentiel
Type de levage
Manuel
Matériau
Acier
Description de modèle
no 46" Dozer Lame
Résiste à la rouille
Oui
Nom de la gamme
S.O.
Sabots de patin
Oui
Type
Chasse-neige
Garantie
Limitée de 1 an
Vous pourriez aussi aimer
CUB CADET
Souffleuse à neige pour tracteur, 3 phases, noir, 42"
Format 42"
Détails
N° d'article 80495138
JOHN DEERE
Soufleuse à neige pour tracteur, série 100, acier, 44 po jaune
Format 44"
Détails
N° d'article 44725011
Ensemble pour souffleuse à neige 3 phases avec goupilles de cisaillement et goupilles fendues à noeud papillon
N° d'article 02225359
EGO
Housse protectrice EGO POWER+ pour souffleuses SNT2100
Format 17.7"x11.8"x13"
Détails
N° d'article 32165151
MTD
Courroie de remplacement, souffleuses MTD, 1/2'' x 35''
Format 1/2x35"
Détails
N° d'article 80495145
EGO
Barre de raclage pour souffleuse à neige EGO POWER+, plastique, 21 po (accessoire seulement)
Format 21"
Détails
N° d'article 32165134
ATLAS
Goupille de blocage de roue pour souffleuses MTD
Format 0.245"x1.66"
Détails
N° d'article 80495142
MTD
Courroie de remplacement, souffleuses MTD, 1/2'' x 37''
Format 1/2"x37"
Détails
N° d'article 80495146
Goupilles de cisaillement, souffleuse Briggs & Strat. J. Deere
Format 2/PK
Détails
N° d'article 02225304
MTD
Boulon de sécurité pour souffleuse, 2'' x 7/16'', pqt/4
Format 2"x7/16"xPK/4
Détails
N° d'article 8049031
EGO
Tarière pour souffleuse EGO en caoutchouc, 21 po, noir (accessoire seulement)
Format 21"
Détails
N° d'article 32165132
EGO
Ensemble de boulon de sécurité pour souffleuse EGO, acier, noir, paquet de 2 (accessoire seulement)
Format 2PK
Détails
N° d'article 32165133
ATLAS
Ensemble de boulons de cisaillement pour souffleuses
Format 0.205"x2"
Détails
N° d'article 02225305
Will this fit john deere E150
No
Date de publication: 2021-10-31
Will this work on a 2021 Cub Cadet 30-in 382cc Rear Engine Lawn Tractor? If not, is there any blade attachment that will work on it?
My awnser is to check the net, for I had to do some adjustments on my arin to get it to work. If you just go to the internet and punch in 46" push blade for club cuddet it should tell you if it will work or not. Sorry if I can't help. But it worked great for me last winter.
Date de publication: 2021-05-03
Hi,I need the adjustable skid shoes for MTD Riding Mower Blade Attachment that you sell (46" Item#: 330657073 | MFR#: 19A30017OEM) Where can I get them?
I have a phone # 1-800-668-1238
This is a parts department in Canada. I am trying to get in touch with them as right now.
Give it a try and good luck. Mr. Murray
Date de publication: 2020-12-03
Will this plow fit a John Deere E120 tractor?
Can't tell you. Revert back to manufacture
Date de publication: 2020-11-05
would this blade fit a poulan Pro mower tractor? PP125h42ja
YES THEIR EXTRA MOUNTING BRACKET WITH THE KIT.
Date de publication: 2020-10-20
Will this fit my 2011 MTD 14.5 hp 145 series
It should fit anything from 2000 onwards if it is MTD and has fast attach. I would recommend you grab the manual for this off the MTD website and compare the mounting diagrams against your machine to be sure. However at 14.5HP you may be pushing it a bit for snow, general philosophy is 20HP plus to use a lawn tractor as a snowplow. So unless you are going to plow downhill or on a completely level surface you may struggle a bit.
Date de publication: 2020-11-13
Hi Can I use this blade on a XT2 SLX50?
Thank you for your question. Yes this fast-attach blade will fit both XT1 and XT2 series Cub Cadet Lawn Tractors.
Date de publication: 2018-08-21
Will this fit a Craftsman T110 lawn tractor? If not, do I need attachment?
Pelle à neige de 46" pour tracteur est évalué
de
5 de
69.
Rated 2 de
5
de
Perrea90 par
You may need to buy frame mounts separately!!
I bought the plow, and it was relatively easy to assemble, but the only problem I had was mounting the darn thing. My tractor frame is a standard frame, not a quick mount one, so in order to mount the plow properly I need to order two frame mounts, part# AF-24932, and I need to make another trip to the hardware store to get the nuts and bolts needed. Other than that silliness, the plow seems to be just an ordinary snow plow, which should work just fine on a lawn tractor.
But, really, WHY MAKE A PLOW AND TOUT IT AS UNIVERSAL IF YOU AREN'T GOING TO INCLUDE THE FRAME MOUNTS FOR IT?!
Date de publication: 2015-01-28
Rated 5 de
5
de
Jwsgc par
Very good lil plow
Very good plow. I would recommend it to any one wanting a garden tractor plow. Some points. You do need chains and weights. The tractor will not push any thing without them. With them it is like a lil tank almost. After initial install it is very easy to put on and take off. One other thing. Use lock tight on the bolts when putting it together. Or check tightness after each plow job. They do come loose. I re did all the bolts with lock tight. Over all I would buy it again
Date de publication: 2014-02-09
Rated 5 de
5
de
Jason J par
What a back saver!
[This review was collected as part of a promotion.] I have a lot of plans for this plow. I received it about 2 weeks before we got about 8 inches of snow. Over several days I took a few minutes to put it together. I’d say it took about 2 hours to do in a cold garage. The only tough part putting this together was getting the lock washer down on the skid shoes.
I have a long paved driveway and this plow took three swipes to clean the whole thing. I was done in less than 15 mins no long enough to get cold. I only had a weight kit and got stuck going up the steep hill, with a few forward and backs I was able to move it and get up the hill and finish up.
When getting stuck on the hill the tires would grip best when going very slowly. My xt2 has better torque than I expected.
Date de publication: 2021-02-08
Rated 5 de
5
de
bigman par
Solid plow!
I bought this for a 2017 42” Cub Cadet XT2 EFI twin cylinder tractor. It fits perfectly, no modifications required. However, I had to remove the front bumper but it was just 4 bolts to do so. This plow is really a heavy duty attachment, not flimsy at all. I plowed snow that was only a couple of inches deep, I didn’t have chains and had no issues, but I also weigh nearly 300 lbs, lol. I’ll have to see how it does in deeper snow to see if chains are needed. There were some bolts rolling around in the box, but it was easy to figure out what they were for. And I wasnt missing any parts.
Date de publication: 2018-01-02
Rated 4 de
5
de
BigAl par
Check the frame supports before you start
The plow is well worth the money.
Unfortunately, the support brackets for the mower frame do not work on the "Pony" frame. Tried drilling new holes but that didn't work. Only answer is to weld the brackets to the mower frame.
Date de publication: 2016-12-23
Rated 1 de
5
de
Grumpyr par
Junk
[This review was collected as part of a promotion.] We bought this plow in October 2020 and have used it about 12 times, it is a piece of garbage, I have to fix it every time I use it. We either got a bad one, or these are just over priced junk. The clips do not hold and keep falling off, one of the springs broke, the lever to adjust the blade is falling apart, the whole thing is extremely loose and just keeps getting worse.
Date de publication: 2021-02-13
Rated 5 de
5
de
Bullet par
best purchase ever
I use my plow for dirt in my yard and its awesome.
Date de publication: 2012-05-04
Rated 4 de
5
de
Dana par
Great design, poor install fit. Works great.
Very poor fit. Could not attach plow to tractor without significant bending of it's mounting brackets. Plow would not couple with the shoulder bolts on the lawn tractor due to poor manufacturing tolerances of the plow. The plow bracket was much too wide to attach to my tractor so I had to hammer it's brackets on both sides to bend the metal enough to couple the plow to the tractor. Very frustrating after spending several hundred dollars on a direct OEM factory accessory for an MTD tractor. In all fairness, the plow works beautifully once installed!
Date de publication: 2014-01-28
LIENS PRATIQUES
Services aux consommateurs
Circulaire
◊Achat en ligne
Livraison express
Déclaration relative à la vie privée
Conditions d'utilisation
Exclusivités web
Politique de prix
Plan de protection
Retours et remboursements
Livraison des électroménagers
Informations sur les promotions
Aide et FAQ
Contactez-nous
Trouvez un magasin
Retours et commandes
À propos de RONA
