
Description
L'outil de découpage Dewalt DW660 est équipé d'un moteur de 5 ampère et 30 000 tr/min afin de fournir un bonne puissance de coupe. Sa conception légère favorise un usage plus long en réduisant la fatigue, et sa construction « jam-pot » assure sa durabilité sur le chantier. L'interrupteur à l'épreuve de la poussière a une bonne durée de vie et permet d'éteindre facilement l'appareil. Le changement des embouts et des lames se fait sans clé, ce qui vous sauvera du temps. Garantie limitée de trois ans.
- Changement d'embout sans outil qui accélère et facilite l'opération
- L'interrupteur marche/arrêt permet aux utilisateurs d'arrêter facilement l'outil
- Le moteur de 5 A et 30 000 tr/min offre une plus grande puissance de coupe
- Corps à conception mince qui réduit la fatigue lors d'une utilisation prolongée
- L'interrupteur est protégé contre l'infiltration de poussière pour augmenter la durée de vie de l'outil
- La construction de type « pot de confiture » assure la durabilité sur le chantier
Caractéristiques
Garantie
Limitée de 3 ans
Nombre total de pièces
1
Utilisation
Coupante
Garantie de base sur la main-d'oeuvre (mois)
12
Garantie de base sur les pièces (mois)
12
Pile comprise
S.O. (câblé)
Tension de batterie
S.O.
Type de boîtier/coffret
S.O. (aucun étui)
Chargeur inclus
Non
Capacité du mandrin
1/4 po et 1/8 po,
Type de mandrin
Sans clé
Sans cordon
Non
Trousse
Oui
Intensité de courant électrique maximal
S.O.
Vitesse maximale (tr/min)
30000
Vitesse minimale (tr/min)
0
Nombre de batteries incluses
0
Nom de la gamme
S.O.
Type de vitesse
1 vitesse,
Sous-marque
S.O.
Produits fréquemment achetés ensemble
Vous pourriez aussi aimer
can it cut click flooring?
Can this tool cut ceramic tile?
Outil de découpage, 5 A est évalué
de
5 de
18.
Rated 4 de
5
de
BubbaJ par
My experience
I purchased this to cutout recessed lights and outlets in drywall. It does come with a bit which is not obvious from the description. It took a few tries to figure out the best technique but once I did it works great. Set the depth correctly before starting. Plunge into the box first and then make a cross mark with the tool to outline the top, bottom and sides. This will give you the basic outline of where you need to cut. Next jump over to the outer edge of the box and make your cut clockwise around the edge. It's that simple. Before cutting make sure you push in any electrical wires as far back in the box as possible. Otherwise you will cut the wires like I did once.
Date de publication: 2017-09-10
Rated 5 de
5
de
ben77 par
another good investment
not only is it good for drywall you can use it on any material wood,metal,pvc,just about anything with the rite bit
Date de publication: 2016-03-04
Rated 5 de
5
de
Aaron par
Great tool
[This review was collected as part of a promotion.] Excellent tool. Get a guide tipped bit to use when cutting around thin plastic electrical boxes so you don’t cut right through them.
Date de publication: 2019-03-17
Rated 4 de
5
de
300 par
Great tool
[This review was collected as part of a promotion.] Works as advertised and best part is the tool less bit changes!!!!
Date de publication: 2018-09-30
Rated 5 de
5
de
TeamBadfish par
Great tool for small jobs
[This review was collected as part of a promotion.] Just purchased this tool to cut out drywall to add backer board. Did an excellent job.
Date de publication: 2018-09-06
Rated 5 de
5
de
jb par
Nice Tool! Good Quality!
[This review was collected as part of a promotion.] Was going to buy Rotozip tool for a drywall project and then read the reviews and specs on DeWalt rotary tool. Excellent design, good power. Would recommend!
Date de publication: 2018-12-07
Rated 4 de
5
de
Daniel par
Good tool, but provided bit not good choice
[This review was collected as part of a promotion.] I have tested this on some drywall and outlet boxes and works fine. Warning: the bit provided with the tool does NOT do the primary task. You will need to get some bits that are smooth on the end. The smooth part spins against the box and guides the bit, kind of like a router. The provided bit will cut into the box.
Date de publication: 2019-11-04
Rated 5 de
5
de
danno492 par
Great for drywall
[This review was collected as part of a promotion.] Got this to cut holes in my drywall while I am remodeling the house.
Works great and never bogs down.
Date de publication: 2019-01-23