
Description
Utilisez cet accessoire Dewalt pour vous attaquer aux projets de perçage et de fixation dans les espaces difficiles à atteindre. Il présente une construction compacte avec un couvercle d'engrenage en métal qui le rend plus robuste. Cet accessoire à angle droit est également doté d'un aimant circulaire qui maintient la vis bien en place. Il convient au travail du métal ou du bois.
- Performance et accessibilité, avec une conception avant-arrière de 1,5 pouce
- Magnétisme pour la rétention des attaches
- Conçu pour être utilisé dans les visseuses à percussion, permettant aux utilisateurs de percer ou de visser
- Les applications comprennent le bois et le métal
- Comprend 1 attache à angle droit
Caractéristiques
Marques/modèles compatibles
Universel
Type de boîtier/coffret
S.O. (aucun étui)
Quantité par emballage
1
Nom de la gamme
Impact Ready
Sous-marque
FlexTorq
Type
Porte-embout pour outil à percussion
Garantie
Aucune
Garantie de base sur la main-d'oeuvre (mois)
0
Garantie de base sur les pièces (mois)
0
Longueur de l'embout
Ensemble
Ensemble/à l'unité
Individuel
Système de rangement inclus
Non
Magnétique
Oui
Type de tête
S.O.
Vous pourriez aussi aimer
Mandrin à angle droit Impact Ready de DeWalt, magnétique, compact, tige hexagonale de 1/4 po est évalué
de
5 de
86.
Rated 5 de
5
de
Fuff par
If Only
On my slanted soffit the drill would not fit at an angle that would allow screws to be installed. Couldn’t use nails because there wasn’t room to swing hammer enough to start them. This attachment saved the day by using the drill to power drive the screws easily and perfectly while hanging from a ladder and holding J-channel simultaneously. No knuckle scuffing. No swear word exclamations. Suddenly the j-channel was up straight and ready to receive soffit. Hold tool in position with dominant hand (right handed for me) and use drill as a motor for powering its spin. Impact drill worked with ease.
Date de publication: 2021-01-22
Rated 4 de
5
de
Dominion par
Great but could be better
[This review was collected as part of a promotion.] This is the smallest one available at Lowe’s which is great cause it fits into tight places. The only thing I would change about it is if there were an optional set screw or if the bit socket was s snap in type like on my impact driver. Cause when I’m using it to drill the bit often comes out when backing out of the hole since it’s just a magnetic socket. Other than that it’s great. If you could figure out a way to put a removable handle on it without making it any bigger, that would be great also. Maybe a stainless split screw with a band that wraps around body.
Date de publication: 2019-08-28
Rated 5 de
5
de
Tracy par
Great for the money
[This review was collected as part of a promotion.] Although small and a bit pricey, it seems to carry all of Dewalt's quality. I have not used it very much yet, but the half dozen or so holes I have done were accomplished easily. Keep in mind that this will require bits or drivers with a hex base; it is not a chuck.
Date de publication: 2019-03-07
Rated 5 de
5
de
KDUB par
Fantastic!!!!!
[This review was collected as part of a promotion.] I love this attachment. It works much better than the flexible unit for medium to heavy tasks. I used it to drill some 1” holes in some 2x using a spade bit with ease. I was very impressed. I am buying a second one just to have it.
Date de publication: 2019-05-10
Rated 5 de
5
de
GMan007 par
exaxtly what i needed and worked great!
I needed to secure a top to a dresser I built but my drill was too big to fit in the space. I picked this up and it worked great. It is small, which i needed, but worked with my impact gun.
Date de publication: 2019-08-15
Rated 5 de
5
de
JOHN par
BEST FOR A TIGHT PLACE!
[This review was collected as part of a promotion.] I have a few custom electrical boxes where I cannot use a regular screwdriver, nor screw gun. This does the job perfectly, precisely, and no effort.
Date de publication: 2019-03-03
Rated 5 de
5
de
Curly par
Excellent
[This review was collected as part of a promotion.] Would recommend to anyone. I work in HVAC and it has come in handy many times over. Time saver. Struggle inhibitor!
Date de publication: 2019-03-04
Rated 5 de
5
de
Misty par
Dewalt right angle attachment
[This review was collected as part of a promotion.] A little awkward to use, when you hit the trigger on the impact it wants to twist but there isn't much that you can do about it. It does get to those hard to reach screws though, which makes it nice to have.
Date de publication: 2019-10-13