• icon-wishlist
  • icon-cart
Voir tous les produits LENOX

Scie à métaux 16 po

N° d'article 79915233 N° de modèle 12132HT50 Format 16"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Scie à métaux à haute tension pour des coupes droites et rapides. Conception unique en «I» pour permettre ce niveau de tension. Espace de rangement pour 5 lames de rechange. Se transforme en scie à placoplâtre. Accepte les lames de scies alternatives de marque Lenox. Poignée confortable pour manoeuvrer avec confiance dans un environnement froid ou mouillé.

Vous pourriez aussi aimer

Scie à métaux à cadre solide, 12'', rouge et noir icon-wishlist
CRAFTSMAN
Scie à métaux à cadre solide, 12'', rouge et noir
Format 12"
Détails
N° d'article 00276747
Scie de placoplâtre en acier, 13", bleu et jaune icon-wishlist
IRWIN
Scie de placoplâtre en acier, 13", bleu et jaune
Format 13"
Détails
N° d'article 02445395
Scie à lames multiples ProTouch(MC) pour bois et métal, 10" icon-wishlist
IRWIN
Scie à lames multiples ProTouch(MC) pour bois et métal, 10"
Format 10"-5 1/4"
Détails
N° d'article 02445438
Scie utilitaire de finition, miniature 10" icon-wishlist
CRAFTSMAN
Scie utilitaire de finition, miniature 10"
Format 10"
Détails
N° d'article 00276997
Scie à métaux légère Fuller, acier au carbone, poignée en aluminium, lame de 12 po icon-wishlist
FULLER
Scie à métaux légère Fuller, acier au carbone, poignée en aluminium, lame de 12 po
Format 12"
Détails
N° d'article 01215374
Scie à placoplâtre Fuller, acier trempé, poignée de plastique, lame de 6 po de long icon-wishlist
FULLER
Scie à placoplâtre Fuller, acier trempé, poignée de plastique, lame de 6 po de long
Format 6"
Détails
N° d'article 70155065
Scie combinée ProTouch(MC), 12" icon-wishlist
IRWIN
Scie combinée ProTouch(MC), 12"
Format 12"
Détails
N° d'article 02445436
Mini scie à métaux Brasscraft de 6 po icon-wishlist
BRASSCRAFT
Mini scie à métaux Brasscraft de 6 po
Format 6"
Détails
N° d'article 37355991
Scie a gypse, bois et plastique Kobalt noir et bleu acier 6 po icon-wishlist
KOBALT
Scie a gypse, bois et plastique Kobalt noir et bleu acier 6 po
Format 6"
Détails
N° d'article 19225203
Scie à guichet pour placoplâtre Irwin, poignée en bois, lame de 6 1/2 po icon-wishlist
IRWIN
Scie à guichet pour placoplâtre Irwin, poignée en bois, lame de 6 1/2 po
Format 6 1/2"
Détails
N° d'article 02445393
Scie à métaux Lenox, tension moyenne, 12 po icon-wishlist
LENOX
Scie à métaux Lenox, tension moyenne, 12 po
 
Détails
N° d'article 79915198
Mini scie à métaux robuste Lenox, poignée en aluminium, lame de 12 po de long, 10 DPP icon-wishlist
LENOX
Mini scie à métaux robuste Lenox, poignée en aluminium, lame de 12 po de long, 10 DPP
 
Détails
N° d'article 79915209
Scie à métaux pratique Fuller, poignée pistolet, lame à dents fines, 7 1/2 po de long, 24 dents par pouce icon-wishlist
FULLER
Scie à métaux pratique Fuller, poignée pistolet, lame à dents fines, 7 1/2 po de long, 24 dents par pouce
 
Détails
N° d'article 1422012
Scie à placoplâtre tout-usage Richard, poignée en bois, acier robuste, 6 po de long icon-wishlist
RICHARD
Scie à placoplâtre tout-usage Richard, poignée en bois, acier robuste, 6 po de long
Format 6"LAME
Détails
N° d'article 0271195
Scie à métaux légère Lenox, 12 po, argent icon-wishlist
LENOX
Scie à métaux légère Lenox, 12 po, argent
Format 12"
Détails
N° d'article 79915218
Scie utilitaire à panneau muraux Richard robuste, acier au carbone, manche en caoutchouc moulé, 6 po de long icon-wishlist
RICHARD
Scie utilitaire à panneau muraux Richard robuste, acier au carbone, manche en caoutchouc moulé, 6 po de long
Format 6"
Détails
N° d'article 0271205
Égoïne icon-wishlist
LENOX
Égoïne
Format 18"
Détails
N° d'article 79915102
Scie à métaux icon-wishlist
LENOX
Scie à métaux
 
Détails
N° d'article 79915199
Scie à placoplâtre Stanley, acier trempé, poignée coussinée, 8 DPP, 6 po de long icon-wishlist
STANLEY
Scie à placoplâtre Stanley, acier trempé, poignée coussinée, 8 DPP, 6 po de long
 
Détails
N° d'article 03055035
Scie à placoplâtre Stanley, 6", 8 DPP icon-wishlist
STANLEY
Scie à placoplâtre Stanley, 6", 8 DPP
Format 6"
Détails
N° d'article 03055441
Scie à usage multiple Stanley FatMax(MD), 6 po icon-wishlist
STANLEY
Scie à usage multiple Stanley FatMax(MD), 6 po
 
Détails
N° d'article 0305190
Scie à métaux Lenox, manche en aluminium, lame de 12 po, 24 dents par pouce icon-wishlist
LENOX
Scie à métaux Lenox, manche en aluminium, lame de 12 po, 24 dents par pouce
Format 12"
Détails
N° d'article 79915210
Scie à placoplâtre Stanley FatMax(MD) en acier, 13 3/4 po icon-wishlist
STANLEY FATMAX
Scie à placoplâtre Stanley FatMax(MD) en acier, 13 3/4 po
Format 13 3/4"
Détails
N° d'article 0305181
Scie à découper Stanley FatMax(MD), 6,38 po x 6,75 po, 16 DPP icon-wishlist
STANLEY
Scie à découper Stanley FatMax(MD), 6,38 po x 6,75 po, 16 DPP
Format 6 3/8"x6 3/4"x16DT
Détails
N° d'article 0305405
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Scie à métaux 16 po est évalué 4.5 de 5 de 51.
Rated 5 de 5 de par Great saw [This review was collected as part of a promotion.] Great saw with a good price,what else could ask for. Does it's job very well
Date de publication: 2018-08-08
Rated 5 de 5 de par Excellent design and ergonomics [This review was collected as part of a promotion.] I bought this saw to replace one I lost at work. Blade replacement and tensioning is easy, works well. I probably overtighten my blades, but no problem so far. It cuts good and straight. And the handle/grips are easy on the hands!!
Date de publication: 2019-12-08
Rated 5 de 5 de par best hacksaw i ever used. I thought that since i didnt use one much,after 40 years of using my old $6.00 dollar stan by,and years of nuckle busting,blade bending or comming off if i dropped it.I decided to buy this one,i could have kicked myself in the tail because this should have been what i used long time ago, alot of thought went into the making of this saw, thanks Mr Lenox.
Date de publication: 2013-06-25
Rated 4 de 5 de par Solid Saw [This review was collected as part of a promotion.] Purchased this to cut down a bunch of EMT conduit for my workshop. Feels good in the hand, solid construction. Have had no issues with this saw.
Date de publication: 2019-07-01
Rated 5 de 5 de par Well designed [This review was collected as part of a promotion.] Well designed saw with easy blade tensioning and extra blade storage.
Date de publication: 2018-08-09
Rated 4 de 5 de par Hacksaw [This review was collected as part of a promotion.] The hacksaw as well balanced and cuts Metal well
Date de publication: 2019-03-15
Rated 5 de 5 de par Suitable for cutting metal pipes High quality and durable hack saw. I was able to cut through 2" cast Iron pipes without much effort.
Date de publication: 2021-09-29
Rated 5 de 5 de par Works [This review was collected as part of a promotion.] Cut through aluminum like butter
Date de publication: 2018-10-03
Rated 4 de 5 de par Great saw but watch for quality control issue My first high quality hack saw. Decided to buy after cutting some 1/8 aluminum with a basic Stanley saw (Lennox blade). Not a major task, but after reading reviews of high tension saws, I thought I could cut better with this saw. And correct. Able to cut faster and hold cut line much better. Just can't tension those basic saws enough. The down side: make sure you check that you can release the blade before leaving store. As a review on another site mentions, the quality control at Lennox leaves much to be desired. Got home and the blade would not release. The pivot arm that tensions the blade is to long near the pin on some items. If you don't see a gap between the arm and the frame (see photo), get another. Two out of the four on the rack were bad. The blade should easily release upon loosening. Clerk indicated I wasn't first return for this problem. Tightening. I was concerned about tightening the 12 turns recommended after reading other reviews here. Cut fine with 10. Plus, 12 turns from what? I started counting from point I just was able to slip on blade. There are no directions on package, nor on Lennox website. Come on, it may not take a genius to load and tighten a hacksaw, but a couple of sentences on the package would help.
Date de publication: 2017-02-05
Rated 5 de 5 de par Good saw [This review was collected as part of a promotion.] I’m like everyone else hack saws never saw strait. I had much more success with this saw . I cut 1/8” angle iron both sides at once and both sides would be pretty much square. If you don’t know how to keep your blade strait vertically it won’t cut strait.
Date de publication: 2018-11-24
Rated 5 de 5 de par Excellent hacksaw [This review was collected as part of a promotion.] The Lowe's associate pointed this out to me when I told him I was looking for a hacksaw.I'm sure glad he did because this saw works great. Ergonomic and easy to use. It even comes with a self storing compartment for extra blades.
Date de publication: 2018-11-01
Rated 4 de 5 de par Nice hacksaw [This review was collected as part of a promotion.] Works great and very sturdy. Really like the way to change blades and set tension. Only down side is the spare blade storage isn't great or I didn't have the set screw tight enough. While I was sawing my spare slid out.
Date de publication: 2018-11-25
Rated 4 de 5 de par Sturdy frame but blades dull quickly [This review was collected as part of a promotion.] I have yet to find a hacksaw as rigid as this one and I really like using it. However, the included blade really does not stay sharp for that long when cutting steel EMT that's why I only gave it 4 stars.
Date de publication: 2018-12-08
Rated 3 de 5 de par Good Quality w/ Nice Features I like the idea of on saw blade storage but it is somewhat unwieldy to insert and remove blades from the saw body. The easy blade tightener is also very nice. The frame seems very solid and should lasta long timewith the TLC. The eeoverall weakpoint seems to be the pins that hold the blades in and allows proper tensioning. These pins seem a little soft and are quite exposed and subject to getting damaged in typical use (i.e., tossing in tool box, dropping, rummaging around amonst other tools, etc).
Date de publication: 2021-10-09
Rated 5 de 5 de par Strong Saw, Good Cutting Performed well cutting plastic columns and galvanized pipe. I had to call the manufacturer to get blade removal instructions, the arrow on the handle wasn't obvious to me, no on-line instructions.
Date de publication: 2018-07-26
Rated 5 de 5 de par The best [This review was collected as part of a promotion.] Yes there's plenty of hacksaws out there that are less money but this one is worth the money..It is quality! Lardog
Date de publication: 2018-11-03
Rated 5 de 5 de par Precise cutting [This review was collected as part of a promotion.] Used this saw to trim the rails for a shower door install. 1/4 inch aluminum cut like butter. Very pleased.
Date de publication: 2019-06-16
Rated 4 de 5 de par Worth the price [This review was collected as part of a promotion.] A bit bulky at the handle for tight squeezes, but over all good product, well built, and worth the buy.
Date de publication: 2019-06-29
Rated 5 de 5 de par lenox 12 in hacksaw [This review was collected as part of a promotion.] I was pulling my hair out trying to cut through a 4 in pipe. This saw made it a piece of cake!!!
Date de publication: 2019-07-24
Rated 5 de 5 de par Very durable! [This review was collected as part of a promotion.] This thing is very tough and made very quick work out of the aluminum project that I had.
Date de publication: 2018-08-27
Rated 4 de 5 de par [This review was collected as part of a promotion.] I like the comfortable handle, it really helps when using for a long period of time.
Date de publication: 2019-03-14
Rated 5 de 5 de par LENOX 12-in Hack Saw [This review was collected as part of a promotion.] Love this hack saw, having the blade storage in frame is great.
Date de publication: 2019-06-09
Rated 5 de 5 de par Works well It is hard to mess up a hacksaw. This one is comfortable and the adjustment for the blade is easy and convenient.
Date de publication: 2021-05-16
Rated 5 de 5 de par I am so happy I have had a few hacksaw'sin my day, but this is the first one that cuts a straight line, no flex great saw.
Date de publication: 2021-04-22
Rated 5 de 5 de par Great product for price! [This review was collected as part of a promotion.] Cuts great! Extremely comfortable grip!
Date de publication: 2018-11-12
Rated 4 de 5 de par Very good purchase Hacksaws are hacksaws, but I am satisfied with this one. Good value, well balanced
Date de publication: 2013-07-01
Rated 5 de 5 de par hacksaw [This review was collected as part of a promotion.] Steady in the hand cuts very well.
Date de publication: 2018-12-04
Rated 5 de 5 de par [This review was collected as part of a promotion.] We bought this to cut through a screw that had been glued to a knob through a cabinet door. It cut through super fast and easy! Maybe it was more than what we needed for the job. I haven't used it on anything else yet, but I think it would handle well on bigger jobs.
Date de publication: 2019-07-20
Rated 5 de 5 de par The name you know [This review was collected as part of a promotion.] Worked as needed. Great build quality you'd come to expect from these products. And life time warranty.
Date de publication: 2019-07-11
Rated 4 de 5 de par Good product [This review was collected as part of a promotion.] Irwin makes great tools that last long. Used it on a handful of projects now and no complaints.
Date de publication: 2019-01-22
  • y_2022, m_5, d_24, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_51
  • loc_fr_CA, sid_79915233, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • REVIEWS, PRODUCT