
Description
Faites des coupes précises avec ces lames de scie circulaire de grand diamètre dont la durée de vie est presque 3x plus longue. Conçue pour offrir une qualité de finition supérieure, chaque lame présente des fentes antivibrations placées aux endroits stratégiques et une denture au carbure ultratranchante pour des coupes nettes et précises. Ces lames à la qualité inégalée sont catégorisées selon leur nombre de dents pour un rendement remarquable.
- Jusqu'à 3 fois la durée de vie
- Conception brevetée de la fente du corps pour une faible vibration
- Géométrie optimisée des dents pour une plus grande précision
- Carbure ultra tranchant pour une coupe nette
Caractéristiques
Nombre de dents
60
Quantité par emballage
1
Type de rebord
Denture conventionnelle
Diamètre de la lame de scie
10 po
Nom de la gamme
DEWALT Grande Diamètre Lame De Scie
Ensemble/à l'unité
Individuel
Sous-marque
S.O.
Type
Lame de scie à onglets/scie sur table
Garantie
Aucune
Possibilité de coupe à sec/à l'eau
Coupe à sec seulement
Fini du bois
Fin
Diamètre de l'arbre
Scie-cloche diamantée 5/8 po
Garantie de base sur la main-d'oeuvre (mois)
0
Garantie de base sur les pièces (mois)
0
Matériau de la lame
Acier à pointe en carbure de tungstène
Marques/modèles compatibles
Universelle
Compatible avec les scies de table/stationnaires
Oui
Compatible avec les scies circulaires
Non
Compatible avec les scies à carreaux et à tronçonner
Non
Dado
Non
Réglages directionnels
Unidirectionnel
Convient aux blocs de cendre
Non
Convient à l'acrylique
Non
Convient à l'asphalte
Non
Convient à la brique
Non
Convient à la céramique
Non
Convient aux terrasses en composite
Oui
Convient au béton
Non
Convient au fibrociment
Non
Convient au verre
Non
Convient au granite
Non
Convient au stratifié
Non
Convient au marbre
Non
Convient à la mélamine
Oui
Convient au métal
Non
Convient aux métaux non ferreux
Non
Convient au plastique
Non
Convient au contreplaqué
Oui
Convient à la porcelaine
Non
Convient à l'ardoise
Non
Convient au vinyle
Non
Convient au bois
Oui
Vous pourriez aussi aimer
Where is this saw blade made.
Lame de 10 po pour scie circulaire DeWalt, dents en carbure 60T, finition de qualité est évalué
de
5 de
82.
Rated 5 de
5
de
Hawkner par
Hawkner's blade of choice
If you need to replace your current blade, do not get a cheap replacement blade. You get what you pay for. This blade works so much better than when my old blade was new. This saw does not bind like the other blade used to when it was new when I was cutting long thin strips for projects, crafts and molding. I bought a second blade to replace the one on my miter saw after I saw this blade in action on my table saw. It''s true, it costs more, but I am so happy at the performance with my saws, it's like the saws are brand new. Cutting better than they ever did. I use it for many do-it-yourself projects like remodeling a bathroom, flooring, construction projects, building tree stands, base boards and molding and so much more. Should have used this blade a long time ago. If you need a replacement blade, this is your choice.. . . Hawk
Date de publication: 2014-03-12
Rated 5 de
5
de
Sais52 par
Great Saw Blade for fine edged cuts
I bought this for doing fine finish cuts on 4 x 1 maple trim - It works very well, with clean cuts,
When the blade is new cut a couple of scrap pieces first to clean the surface paint off the blade, that way it is clean for your first finish job.
Date de publication: 2013-08-29
Rated 5 de
5
de
Sean par
Replacement blade for Ryobi table saw
Replaced factory ryobi rip blade with this and it is night and day performance. I do a lot of DIY projects around the house and using this blade for ripping and cross cutting plywood makes for virtually no sanding. It is a bit pricey, but well worth the reduced time and effort I have to put into sanding.
Date de publication: 2013-10-30
Rated 5 de
5
de
skipperkeb par
Great Blade
Installed on a Ridgid TS3650. Have only had it a short time - have used to crosscut and rip pine, cherry and oak - up to 2" thick. Blade provides smooth cuts, both crosscut and ripping.
Date de publication: 2014-03-19
Rated 5 de
5
de
onecolorado old man par
10" 60-tooth segmented circular saw blade
This blade cuts great and leaves a very smooth cut.
Date de publication: 2011-09-28
Rated 5 de
5
de
Tractor-Sam par
Thought my saw was becoming a dog until
This blade has cut my hardwood flooring miters and ends perfectly smooth. No vibration or splinters in the least.
Date de publication: 2013-08-19
Rated 5 de
5
de
rksmerk par
Worked well for several projects
[This review was collected as part of a promotion.] I've used this saw blade for several projects (hard/soft wood) and it has performed well for almost 6 months. I'm not sure if it is really better or worse than the 40T or 80T or the construction blade.
Date de publication: 2019-12-02
Rated 5 de
5
de
Mec1117 par
Great purchase
I bought this blade to cut some nice, birch plywood for a storage bench. The price seemed a little high, but the results made the purchase worthwhile. I cut five sheets of plywood, without one bit of tear out. I'm very pleased the result.
Date de publication: 2017-05-29