Voir tous les produits
DEWALT
Description
Facilitez vos travaux de perçage avec cette perceuse électrique Dewalt. Dotée d'un mandrin à cliquet sans clé, cette perceuse maintient les mèches fermement en place grâce à une molette qui permet de les serrer et de les desserrer facilement. Gardez une prise confortable grâce à sa poignée souple et ergonomique. Sa gâchette à vitesse variable fournit jusqu'à 2500 tr/min, ce qui permet à cette perceuse de 8 ampères de convenir à un large éventail d'applications.
Caractéristiques
Source d'alimentation
Électrique
Garantie
Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours
Type
Électrique/portatif
Ampérage
8 A
Tours par minute
0 à 2500
Mandrin
3/8", sans clé
Vitesse
Variable
Inclus
Sac de transport
Produits fréquemment achetés ensemble
WOODS
Cordon de rallonge électrique Woods, 12/3, 25', jaune
Format 12/3 25'
Détails
N° d'article 74045239
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053
Vous pourriez aussi aimer
DEWALT
Perceuse à percussion sans fil 1/2 po Dewalt, moteur sans balais, lumière DEL, vitesse variable
Format 1/2"x20V
Détails
N° d'article 00277187
MAKITA
Perceuse et mélangeur à fil 1/2 po de Makita, poignée ergonomique, moteur 8,5 A, 600 tr/min
Format 1/2"x8.5AM
Détails
N° d'article 11975221
QUIK DRIVE
Visseuse à usages multiples Simpson, avec cordon, réversible, dents antidérapantes remplaçables
Format 1"-3"
Détails
N° d'article 39195024
SKT
Marteau rotatif SKT, moteur de 10 A, gâchette surdimensionnée, vitesse variable
Format 10AM
Détails
N° d'article 59595099
BOSCH BULLDOG XTREME
Marteau perforateur Xtreme Bulldog SDS-Plus de Bosch, moteur de 8,5 A, sélecteur multifonctions, vitesse variable
Format 1 1/8"x8.5AM
Détails
N° d'article 19836167
BOSCH
Perceuse à percussion 1/2 po VSR avec étui de transport Bosch, moteur 7 A, double usage, poignée 360°
Format 1/2"x7A
Détails
N° d'article 1983278
MAKITA
Perceuse à fil 1/2 po de Makita, moteur 8,5 A, 600 tr/min, récipient et palette de malaxage
Format 1/2"x8.5AM
Détails
N° d'article 11975278
DEWALT
Perceuse à percussion 1/2 po VVR DeWalt, vitesse variable, moteur 8,5 A, double usage, poignée 360°
Format 1/2"x7.8A
Détails
N° d'article 0027199
CRAFTSMAN
Perceuse à percussion à fil de 1/2 po de Craftsman, moteur 7 A, 3100 tr/min, mandrin, gâchette verrouillable
Format 1/2"x7AM
Détails
N° d'article 00276552
SENCO
Visseuse alimentation automatique et accessoires Senco, 3 en 1, moteur 6,4 A, rail coulissant breveté
Format 6.4AM
Détails
N° d'article 10595009
QUIK DRIVE
Perceuse à placoplâtre à alimentation auto avec fil Strong-Tie Quik Drive, mandrin 1/4 po, moteur de 6,9 A, 2500 tr/min
Format 1@3"
Détails
N° d'article 3919020
BOSCH
Marteau de démolition à fil Bosch, moteur 10 A, 2800 tr/min, poignée auxiliaire pivotante sur 360°
Format 120V 10AM
Détails
N° d'article 19835702
CRAFTSMAN
Perceuse à fil mandrin sans clé 3/8 po de Craftsman, moteur 7 A, 2500 tr/min, gâchette verrouillable
Format 3/8"
Détails
N° d'article 00276555
MAKITA
Perceuse à percussion 1/2 po à fil Makita, vitesse variable, coffret, moteur 6 A, mandrin sans clé
Format 1/2"x6AM
Détails
N° d'article 11975408
DEWALT
Clé à chocs 1/2 po Dewalt, enclume à cheville d'arrêt, moteur 7,5 A, couple 345 pi/lb, poignée souple
Format 1/2"x7.5A
Détails
N° d'article 0027227
SENCO
Visseuse électrique 2 po Senco, moteur 6 A, 5000 tr/min, remplacement rapide, vitesse variable
N° d'article 10595010
MAKITA
Perceuse à percussion 1/2 po avec étui de transport Makita, moteur 6,6 A, double usage, poignée 360°
Format 1/2"x6.6AM
Détails
N° d'article 11975290
DEWALT
Perceuse 1/2 po VVR à prise en T et mandrin à clé DeWalt, moteur 9 A, 550 tr/min, 120 V
Format 1/2"x9Ax120V
Détails
N° d'article 0027684
MAKITA
Visseuse pour cloisons sèches à fil Makita, moteur 6 A, 4000 tr/min, réversible, localisateur à touche unique
Format 1/4"x6.5AM
Détails
N° d'article 11975212
CRAFTSMAN
Clé à chocs avec cordon, 1/2", 7,5 A, 2700 IPM, 7 douilles
Format 1/2"x7.5AM
Détails
N° d'article 00276810
Ensemble de perceuse DeWalt, mandrin à cliquet de 3/8 po sans clé, moteur 8 A, 2 500 tr/min, vitesse variable est évalué
de
5 de
137.
Rated 4 de
5
de
lmbr par
Just Purchaced - Nov. 2010
The primary reason for buying this particular model is its design. There are very few 3/8 drill that are a decent quality and price where the handle is actually centered on the body of the drill. It is very well balanced. You may read some people reviewing other drills say that you have to have strong hands, but the case is that they are just poorly balanced. I used this drill to build a 2x6 shelf in my basement and it was a pleasure to use. I would definitely recommend this to a friend. I gave it 4 stars cause I haven't used it enough to determine its durability and life span. It feels sturdy, but time will tell.
Date de publication: 2010-12-15
Rated 5 de
5
de
BellevilleIL-DIYer par
Great Drill - Addressing Chuck Issue
This is a great drill. Powerful despit its smaller size and has a lightweight feel. Compact for lots of applications.
I’ve seen a lot of posts about a loose chuck or bits falling out and here was my experience. Out of the box I put a drill bit in and tightened it with light pressure. The bit slipped and I thought that what everyone was posting was true. But I tightened it until the chuck clicked a couple of times and drove a 3/8 drill bit through a 2x4 with aggressive pressure. Never slipped. I even turned the 2x4 to endgrain and put full pressure on the drill, never slipped once. I drilled about 6-7 holes and all with full pressure as fast as I could. My suggustion is to tighten the chuck until it clicks a couple of times.
Date de publication: 2021-02-03
Rated 3 de
5
de
Dan- par
8-Amp 3/8-in Drill Kit with Case
First of all, it did not come with a case, but rather a cloth bag which is OK because I didn't care about any kind of case anyway. All I was really looking for was a variable speed drill (VSR) that I didn't have to worry about a battery crapping out when I need it most. As it turns out, this drill has all the power and speed I was looking for and really feels and handles great, but... as far as the variable speed goes, the trigger button needs some work as it causes the drill to go from 0 - Max very easily with very little variation in-between.
Date de publication: 2013-07-31
Rated 5 de
5
de
lowes_regular par
solid and strong
I bought this because I really needed a variable speed drill. I almost got the cordless but opted against having to remember to recharge batteries. So far I have used it for several light use projects. I love that the sensitive trigger allows me to gently use the power and torque when working on finer projects. The best part of the tool it the chuck. It's the best church I have ever used and wish is was on my other drills. The only thing you give up for this drill is that it does not go up to 1/2 inch bits.
Date de publication: 2011-05-17
Rated 5 de
5
de
Alan par
Great drill for the money.
I bought this drill a bit over 2 years ago. I still love it and would love another. I have only used it on rough carpentry projects because I have a cordless version. I think that the variable speed can be a bit touchey but other than that I think that it is great. As far as I'm concered I could run it over with my truck and it would still work. Overall I would deffinately reccomend this to a friend.
Date de publication: 2010-12-17
Rated 5 de
5
de
RickLe par
What a drill should be.
Awesome power & rpm. I'm 55 and this is undoubtedly the best drill I've ever used. I'm done with dead & dying batteries, half power and low rpm's just for portability when I don't really need cordless portability. Nice case also holds a Dewalt drill bit case so I also bought the larger of the titanium drill bit kits. Nice to have everything in one case.
Date de publication: 2012-05-23
Rated 5 de
5
de
SpruceBruce par
Nimble, powerful
I'm a casual DIY'er and project hobbyist: this driver has a good bit of power, and the size and weight of the tool make it feel very nimble. The forward positioned is pretty great, it lets you keep more control on the tool when driving at an awkward angles. Like other drills I've used, it does have a pretty short trigger travel between low-speed and high-speed, but just like driving a new car, it just takes some getting used to.
Date de publication: 2013-03-11
Rated 3 de
5
de
do most of it myself par
Mr
This has high rpm with very quick trigger and when holding the chuck, your hands can get used heavily. the chick has a two click tightening and done. most people will try to hold the chuck til the drill spins out of their hands, but not necessary. if the entering drill bit shaft is not at least in the ball-park round, or you do not take care with mounting in the chuck, yes, I can see to where a chuck might be broken. This is a great drill for a paint stir or wire brush attachment. However you have to keep holding the tigger as far as I can tell. This high rpm is to fast for ordinary drill bits and screws. You must learn to start slow and use good materials. This is a power drill, battery drills have their place and you should have one of each. The case could be much better but better than nothing.
Date de publication: 2011-04-27
LIENS PRATIQUES
Services aux consommateurs
Circulaire
◊Achat en ligne
Livraison express
Déclaration relative à la vie privée
Conditions d'utilisation
Exclusivités web
Politique de prix
Plan de protection
Retours et remboursements
Livraison des électroménagers
Informations sur les promotions
Aide et FAQ
Contactez-nous
Trouvez un magasin
Retours et commandes
À propos de RONA
