
Description
Effectuez diverses tâches de perçage avec ce foret à percussion Bosch. Conçus en acier rapide, ils offrent des performances à grande vitesse. Les pointes en carbure offrent une robustesse et une utilisation durable. Ces forets à percussion sont livrés avec un boîtier Brute Tough pour entreposer divers forets.
Caractéristiques
Composante
Acier au carbone
Inclus
7 forets : (3/16 x 2 x 4 po), (1/4 x 2 x 4 po), (5/16 x 4 x 6 po), (3/8 x 4 x 6 po), (1/2 x 4 x 6 po), (deux 1/4 x 4 x 6 po). Boîtier inclus.
Modèle
Bulldog
Nombre de pièces
7
Style
SDS Plus
Utilisations
Pour perceuse à percussion
Produits fréquemment achetés ensemble
Vous pourriez aussi aimer
Ensemble de 7 forets pour perceuse à percussion Bulldog de Bosch, 6 po L., pointe au carbure, avec boîtier robuste est évalué
de
5 de
19.
Rated 5 de
5
de
Peter par
Excellent German steel bits, great case
These are high quality, German steel, made in Germany bits. If you are drilling concrete, They must be used with a real rotary hammer, not a cheapo all in one drill that has claims to have a hammer setting. Unlike twist drills in wood, the quality of the hammer drill determines most of the effectiveness in drilling in concrete. I have two real Bosch rotary hammerdrills and these bits work perfectly, in high strength cured concrete. I also have an expensive drill drill with so called hammer functions and it's a waste of time. Use the proper tool. Only bad workmen blame the tool.
Date de publication: 2018-05-11
Rated 4 de
5
de
cdaoside par
Good bits as long as you dont need deep holes
I agree that the reviewers who had issues, most likely werent using a roto hammer that is appropriate, or even using a roto hammer at all, but a drill. I bought these in a pinch to replace a full set of much longer Hilti SDS bits ($1,000.00) and they did just fine. Carbide, is carbide. If you try and use them with a drill motor, youll grow old in the time it will take you to drill a few holes. Know what tool is best, know what youre doing.
Date de publication: 2017-03-27
Rated 5 de
5
de
Shane par
Excellent
First off, I had to laugh at the review from the guy using these in a hammer drill... These are for an SDS-Plus Rotary Hammer, big difference. I used these to drill into a foundation for installing Tapcons into a basement bulkhead. Drilled into the concrete like butter.
Date de publication: 2017-02-14
Rated 5 de
5
de
spydyrbyte par
Clean, easy, effective drilling.
[This review was collected as part of a promotion.] I've used several brands of masonry bits over the years and these stomp the competition. From the specially shaped tips, to the fluting, to the wear indicators. I've honestly never seen a bit create as clean and round a hole as these do. Highly recommended. The only complaint I have is with the case. There's no retainer on the red bit holders so as you open the case they tend to tilt out immediately. Clearly, this is a minor issue in the grand scheme of things.
Date de publication: 2019-06-10
Rated 3 de
5
de
G-bone par
Did what I needed
[This review was collected as part of a promotion.] Worked for drilling through some brick so I could hang my tv above my fireplace mantle. However, after using them they seemed to have dulled after the first use. By the time I drilled the 4th hole it was significantly more difficult. Plus the bits were so hot we had to quench them in water which I’m sure hardened them. The product worked for what I needed them to but I’m not sure if they’ll work to the same capacity again.
Date de publication: 2018-12-30
Rated 5 de
5
de
Cheech par
Great starter set!
After about a half hour of drilling into brick and ruining some bits, I bought this set. Needed a 1/2 inch bit to install and set an anchor into our fireplace. Worked like a charm, in and out of the brick, no problem. It is amazing how much easier things are when you have the right tools. This is a great starter set for those with small projects around the house. I am very pleased with this set.
Date de publication: 2017-07-06
Rated 5 de
5
de
Stevie par
Awesome!!!
[This review was collected as part of a promotion.] Great all around set of masonry drill bits. Hard to find an actual “set” of masonry bits for some reason but these do not disappoint. Working great for some home projects I have going!
Date de publication: 2018-08-25
Rated 4 de
5
de
Kautum par
Good bits
[This review was collected as part of a promotion.] Pretty nice bits, worked well in my Bosch hammerdrill. Only thing I felt like one of the bits got bent fairly easily. Worked well though
Date de publication: 2019-08-27