• icon-wishlist
  • icon-cart
Voir tous les produits CRAFTSMAN

Dégauchisseuse stationnaire Craftsman, 10 A

N° d'article 00277226 N° de modèle CMEW020 Format 10AM
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La dégauchisseuse stationnaire Craftsman de 10 A dispose d'une plage de vitesse de 6000 à 11 000 tr/min et comporte un moteur résistant permettant des coupes efficaces dans les bois durs et tendres. La tête de coupe à deux couteaux avec avec système de nivellement à vis creuse permet de facilement remplacer ou ajuster les couteaux et garantit un enlèvement de matière maximal. Le cadran de vitesse intégré vous offre toute la latitude pour bien contrôler votre coupe, tandis que le guide central de 4,25 pouces fournit le support nécessaire tout au long de la coupe pour un jointement des bords en toute précision. Garantie limitée de 3 ans, 1 an de service gratuit et garantie de satisfaction de 90 jours.

Caractéristiques

Garantie
Garantie limitée de 3 ans
Type
Dégauchisseuse
Composante
Aluminium
Style
Stationnaire
Couleur
Rouge et noir
Tours par minute
6000 à 11 000 tours/min
Voltage
120 V
Lame
2 lames en acier
Ampérage
10 A
Longueur
Table: 30 po (76,2 cm), guide: 19,75 po (50,17 cm)
Largeur
6,5 po (16,51 cm)
Profondeur de coupe
0,125 po (3,18 mm)
Hauteur
17,75 po (45,09 cm)
Poids
35 lb (15,88 kg)
Capacité du guide de refente
45 degrés

Vous pourriez aussi aimer

Raboteuse d'établi fixe à fil 12 1/2 po Dewalt, moteur 15 A, coupe 1/8 po p., changement lame rapide icon-wishlist
DEWALT
Raboteuse d'établi fixe à fil 12 1/2 po Dewalt, moteur 15 A, coupe 1/8 po p., changement lame rapide
Format 12.5"x15A
Détails
N° d'article 0834236
Raboteuse d'établi à fil DeWalt, moteur 15 A, tête à 3 lames, 2 vitesses d'engrenage icon-wishlist
DEWALT
Raboteuse d'établi à fil DeWalt, moteur 15 A, tête à 3 lames, 2 vitesses d'engrenage
Format 13"x15A
Détails
N° d'article 0027167
Raboteuse stationnaire Craftsman de 15 A icon-wishlist
CRAFTSMAN
Raboteuse stationnaire Craftsman de 15 A
Format 15AM
Détails
N° d'article 00277227
Raboteuse électrique portative de 3 1/4 po par MetaboHPT, 5,5 A, 120 V, à brancher icon-wishlist
METABOHPT
Raboteuse électrique portative de 3 1/4 po par MetaboHPT, 5,5 A, 120 V, à brancher
 
Détails
N° d'article 330777495
Raboteuse portative Triton Tools de 3,8 A icon-wishlist
TRITON TOOLS
Raboteuse portative Triton Tools de 3,8 A
 
Détails
N° d'article 330900878
Raboteuse Bosch, 18 volts, 3 1/4" icon-wishlist
BOSCH
Raboteuse Bosch, 18 volts, 3 1/4"
 
Détails
N° d'article 330622799
Raboteuse à moteur EC sans balais Max, 12 volts icon-wishlist
BOSCH
Raboteuse à moteur EC sans balais Max, 12 volts
 
Détails
N° d'article 330614112
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Dégauchisseuse stationnaire Craftsman, 10 A est évalué 2.2 de 5 de 74.
Rated 5 de 5 de par It is the Porter Cable with the Craftsmans badge [This review was collected as part of a promotion.] Got this after i couldn't find the Porter Cable around anymore. Out of the box set up was easy. Fence angle is alitte touchy, but got it dailed in pretty good. This is the same jointer as the Porter Cable, B+D must own the Craftsman name now. Imo is a good thing. They also make Dewalt! Anyway read reviews for the Porter Cable and apply them to this jointer/planer. For the price point on this jointer im very happy so far. Don't know about long-term but today worked well. Only using as a jounter so far as i have a 13" planer. But i believe if i needed to plane somrthing real quick it would work fine. Great for budget small workshop!!!
Date de publication: 2019-09-07
Rated 4 de 5 de par Craftsman Jointer works well [This review was collected as part of a promotion.] Similar to one of the other reviews, bought it because the Porter-Cable was no longer offered. So far, I found it to be a good alternative. The instructions to set it up were straight forward and made it easy setup out of the box. I'd seen a lot of criticism of setting up other brand bench Jointers fences. The Craftsman on appearance looked similar to other makes fences. So I was concerned, but it turned out I had zero issues with my Craftsman. So far I’ve used the jointer for making a picture frame and joining a spruce two piece guitar top. Both pieces were under 3 feet. I would of given it a higher rating if I’d used it more, but so far so good it has met all my needs!
Date de publication: 2019-09-08
Rated 4 de 5 de par Decent machine There are a lot of negative reviews on here for this jointer but it really works well. I used it first for some 2x6x88 pallet boards and it only struggled with it due to the table lengths. I made an extended in and out feed table and worked like a champ. There is a rotor lock that was probably the culprit for most of the negative reviews, it likes to bounce around a bit and seems dangerous. If it catches, the machine won’t work and then it’ll probably pop the internal circuit breaker. Not rocket science. But it is avoidable.
Date de publication: 2021-03-01
Rated 1 de 5 de par Died Twice Purchased at Lowe’s. One week later, it didn’t work at all. Swapped it for another. Two months later, this one dies mid board.
Date de publication: 2020-09-04
Rated 5 de 5 de par Very impressed I purchased the craftsman jointer a week ago. I was struggling with the reviews but took the plunge. I found the set up simple. Didn’t need directions. Very straight forward. Hooked up the dust port simple enough. Started working and have been using it since I have a moderate shop and restore and refinish antiques. I also custom build various furnitures. Been at near 40 years. I have really enjoyed the results of this jointer Have had several of the big boys in the past For the money, can’t go wrong
Date de publication: 2021-04-14
Rated 4 de 5 de par Good enough [This review was collected as part of a promotion.] Making a keepsake box for my daughter and have some red oak logs that I board cut. I needed to plane and joint the red oak pieces of wood. I’m happy With the results of this jointer planer. Time will tell for long term use but I’m confident craftsman wood working tools.
Date de publication: 2019-11-20
Rated 1 de 5 de par I have had this jointer for approximately six months. I have only made passes at less then 1/32". It was working fine until today. I made a pass with 3/4" hardwood turned it off, went back to make a pass with another board and it would not start. There is power going to and from the switch. After reading some of the negative reviews I assume the motor has given out. What has happened to Craftsman?
Date de publication: 2021-08-15
Rated 3 de 5 de par Good but Not adjustable [This review was collected as part of a promotion.] Bought this because Craftsman offers a 90 day money back guarantee. Couldn’t get the indeed and outfeed tables co-planer without some substantial diy-fabricating. From the shelf they peaked enough to prohibit running long ripped 2x4 boards. It caused concave results and will be upgrading. The quality outside of that issue was great and Craftsman’s customer service was great.
Date de publication: 2019-09-01
  • y_2021, m_12, d_6, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_74
  • loc_fr_CA, sid_00277226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT