
Description
Cet outil de Craftsman(MD) est une tondeuse à essence. Il dispose d'un moteur 2 temps léger et facile à utiliser. Coupez plus d'herbe en moins de temps grâce à la largeur de coupe de 17 po. Il est équipé de fonctionnalités telles que la technologie Easy Start pour des démarrages de traction plus simples et un enroulement facile pour que vous puissiez couper plus rapidement. Obtenez un confort optimal avec la poignée de surmoulage réglable et la tige incurvée équilibrée offre une vue claire de la zone à tailler.
- PUISSANT ET LÉGER : moteur à deux temps de 25 cm³, léger et facile à utiliser
- DÉMARRAGE PAR TIRAGE FACILE : Technologie Easy Start pour des démarrages par traction plus faciles
- GARANTIE : Garantie du fabricant de deux ans
- GRANDE LARGEUR DE COUPE : Une largeur de coupe de 17 pouces vous permet de couper plus d'herbe en moins de temps
- VISIBILITÉ PENDANT LA COUPE : le manche incurvé équilibré rend la coupe confortable et offre une vue dégagée de la zone à couper
- TÊTE D'ALIMENTATION PAR PRESSION À ENROULEMENT FACILE : alimente un fil de 0,095 po
- Poignée surmoulée réglable pour le contrôle et le confort de l'opérateur
- Compatible avec le système d'outils multifonctionnels TrimmerPlus (accessoires vendus séparément)
- INCLUT : Huile pour moteur à deux temps
Caractéristiques
Hauteur de l'article assemblé (cm)
23,495
Hauteur de l'article assemblé (po)
9.25
Hauteur de l'article assemblé (mm)
234.95
Longueur de l'article assemblé (cm)
153,67
Longueur de l'article assemblé (po)
60.5
Longueur de l'article assemblé (mm)
1536.7
Poids de l'article assemblé (kg)
5.80608
Poids de l'article assemblé (lb)
12,8
Largeur de l'article assemblé (cm)
24,13
Largeur de l'article assemblé (po)
9.5
Largeur de l'article assemblé (mm)
241.3
Assemblage requis
Oui
Possibilité d'accessoires
Oui
Garantie de base sur la main-d'oeuvre (mois)
24
Garantie de base sur les pièces (mois)
24
Conforme aux exigences du CARB
Oui
Commercial/résidentiel
Résidentiel
Largeur de coupe (cm)
43,18
Largeur de coupe (po)
17
Largeur de coupe (mm)
431.8
Compatible avec taille-bordure
Oui
Marque du moteur
MTD,
Cylindrée (centimètres cubes)
Centimètres cubes
Huile à moteur incluse
Oui
Type de moteur
2 temps
Garantie sur la main-d'oeuvre du moteur (mois)
24
Garantie sur les pièces du moteur (mois)
24
Numéro de dossier/d'homologation
S.O.
Capacité du réservoir à carburant (liq)
8.5
Capacité du réservoir à carburant (ml)
251.37475
Ratio du mélange de carburant
50:1
Type de carburant
Mélange essence et huile
Alimentation du fil
À bosse et fixe
Garantie sur la main-d'oeuvre des accessoires (mois)
24
Garantie sur les pièces des accessoires (mois)
24
Diamètre de coupe verticale recommandé (cm)
0,2413
Diamètre de coupe verticale recommandé (po)
0.095
Diamètre de coupe verticale recommandé (mm)
2.413
Normes de sécurité
Non-homologué par des normes de sécurité
Nom de la gamme
WC2200
Longueur de la tige (cm)
114,3
Longueur de la tige (po)
45
Longueur de la tige (mm)
1143.0
Type de tige
Incurvé
Fil (simple ou double)
Double
Type de démarrage
Démarrage par traction assistée par ressort
Type
Coupe-bordure à essence,
Utilisation
Travaux modérés
Garantie
Limitée de 2 ans
Source d'alimentation
Essence
Ligne incluse
Oui
Vous pourriez aussi aimer
Quel est la garantie pour cet coupe-herbe à essence?
Merci pour votre question. Ce coupe-herbe a une garantie de 2 ans.
Date de publication: 2021-10-18
Coupe-bordure, Craftsman, WC200, essence 24 cc, rouge et noir est évalué
de
5 de
236.
Rated 1 de
5
de
Clayton357 par
Recoil assembly came apart.
Bought this weedeater April 2021. Worked great. This summer I went to crank it and the pull cord wouldn't retract. So I opened it up and the whole pulley assembly was apart. A small metal ring that is suppose to hold it all in place had come loose. So I put it all back together again and made sure the ring was snug in place. Cranked right up and ran for a couple hours. Then pull cord wouldn't pull out again. Opened it up again and found a complete mess. The assembly had come loose again but this time the rope had wrapped around and melted. It was a complete mess. Now the whole starter assembly will most likely have to be replaced.
Date de publication: 2022-06-07
Rated 1 de
5
de
Larry par
Don’t buy nothing from craftsman.
I bought this weed eater and to be honest with you, I’m very disappointed with this product. I’ve only had the weed eater for 15 months and it’s already out of service. It started to make a weird sound then it just shut off and now I can’t even pull the string to crank it because it’s locked up. I hate to waste money like that. At least give me two years before the product goes bad. I wish I would’ve read the reviews before I purchased this weed eater, I can promise you I would have not bought this trash weed eater.
Date de publication: 2021-05-13
Rated 1 de
5
de
Ricky par
horrible!
I bought this at the beginning of last summer. worked fine other then trimmer head was junk. easy to replace though. This year however? After being lightly used last year, the pull cord starter broke. And you would think that it would be an easy piece to replace yourself! wrong! I would not recommend to anyone. Actually, I never want to go craftsman again! I'm a new homeowner and I thought buying a reputable name would help me along... WRONG! the blower, weed eater and my ride on mower ALL have had issues in my first year! I feel like it's pretty much 3k down the drain.. but I'll try and make the mower last.. everything else, I'll just replace it. No need for headaches like this.
Date de publication: 2022-05-26
Rated 1 de
5
de
Robert par
Trim Head is nothing but problems
I bought this unit and I constantly have issues with the line cutting off or jamming. I have to stop and reset the trim head. Recently the trimmer stopped spinning and the plastic fused to the shaft and I cannot get it off to put on a replacement. I am trying to by the whole trimmer assembly again, ad the power head is good and i have the hedge trimmer. Craftsman used to be quality, I recently returned and older ratchet to Ace and they replaced it. Hopefully someone from craftsman will contact me with a case # to help me get a replacement attachment.
Date de publication: 2021-08-08
Rated 2 de
5
de
FrustratedInTexas par
Doesn't load string correctly
This is my first Craftsman and gas weed eater. I bought it so I could use it at my hunting lease, as well as home.
However, the stringing process is horrible. Every time I have to add new string, it wraps both strands on the same level instead of one insertion point on top and one on bottom. Therefore, one of the sides will not feed because it is entwined with the other side and I have to constantly open the string attachment, pull out the string and restring it. My edging now takes me 3X's longer than with my older weed eater.
I have used it three times and I am about ready to take it back.
Date de publication: 2021-05-25
Rated 1 de
5
de
BIllG par
Bad String Design
The string winding system is poorly designed. I have to stop every 5 minutes to restring this machine because the line binds up and doesn't advance. The instruction on replacement string are simple, and that part is easy. But the string never unwinds smoothly.
Oddest is the design of the hole for the string - the string catches behind the raised disc where the string enters. Or the string gets tangled on itself based on how the winding mechanism pulls the string into the head. Or, if you load the recommended 3" of string into the catch mechanism, the inserted end protrudes through the head just enough to catch the wound string. The only option is to remove the cap, pull all the string out and restring. In my small yard, I have to restring at least 3 times, sometimes every 3-5 minutes.
Date de publication: 2021-08-24
Rated 1 de
5
de
lissapow par
Pull cord broke on second use
I bought this because I usually have no issues with Craftsman products & because it was lightweight. I never even got to finish weedeating my yard with it. I started it up the first time, no issues...i was mainly just testing it out. I used it for a few mins & shut it off. When i went to go use it the second time to actually get the real weedeating done, the pullcord broke. It started but once i had to shut it off, i couldnt start it back obviously.
Date de publication: 2021-04-25
Rated 2 de
5
de
Dave par
Lotta paid reviews for this
I find that craftsman products are inferior in general. Poorly designed in my experience. In this case, the string loading takes more time than weed eating as the thing ages. This is the last two cycle engine I buy for weed eating. My right deltoid is huge now from exercising the pull start rope so many times, so much that I’m so swole I can’t wear polo shirts. I digress. I am buying a different brand.
Date de publication: 2021-10-15