
Description
Appareil silencieux à conception discrète et haute efficacité, le convecteur électronique Stelpro Mirage comporte un meuble à faible profondeur et une façade entièrement fabriqués à partir d'acier de calibre 20. Le boîtier est surélevé, ce qui procure un effet de cheminée amélioré et favorise un meilleur mouvement de convection. Le convecteur est doté d'une prise d'air inférieure ainsi que d'une évacuation d'air supérieure. Deux éléments tubulaires en acier inoxydable sont isolés par des manchons en nylon, réduisant les bruits de dilatation et de contraction du métal soumis aux cycles de chauffage. Son allure moderne et élégante convient à n'importe quelle pièce. Modèle de 1500/1125 W sans thermostat intégré.

Caractéristiques
Poids
17,75 lb (8 kg)
Commercial/Résidentiel
Résidentiel et commercial
Composante
Acier
Couleur
Blanc
Garantie
Garantie limitée de 5 ans, garantie limitée de 3 ans sur les composantes électroniques
Hauteur
45,7 cm (18 po)
Installation
Mural
Largeur
74,9 cm (29,5 po)
Modèle
Mirage(MC)
Profondeur
7,3 cm (2,87 po)
Thermostat (O/N)
Non
Type
Convecteur électronique
Voltage
240/208 V (60 Hz)
Wattage
1500/1125 W
Ampérage
6,3/5,4 A
Vous pourriez aussi aimer
I have 1 thermostat working for 2 convector heaters. They are all run by a 240 volt breaker. One of them broke. Is this model appropriate?
If your thermostat has the capacity to control the combined power of the two units, your installation should work. Example, if your electronic thermostat has a capacity of 4000 watts and your units combined have a wattage of 4000 watts or less, it should work. Also important, the units should not have a built-inthermostat if you are using a wall thermostat.
Date de publication: 2021-01-27
Is it suitable for bathroom?
Hello,
This device can be installed in a bathroom. You must ensure that you maintain the required clearance, as indicated in the installer guide :
https://www.stelpro.com/wp-content/uploads/2019/12/INS_MIR_0219_EN.pdf
Regards,
Date de publication: 2020-11-11