• icon-wishlist
  • icon-cart
Voir tous les produits J-B WELD

Colle époxy étanche « Marineweld » en tubes 28,4 g

N° d'article 01105004 N° de modèle 8272CAN Format 28.4GR
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

La colle époxy étanche « Marineweld » en deux parties bleue et noire de J-B Weld fournit de fortes et durables réparations à de multiples surfaces telles que le métal, le bois, plastique, la tuile, le PVC, la céramique, fibre de verre ou l'aluminium. Elle est idéale pour les bateaux, le pont et la coque, les moteurs en-bord et hors-bord ainsi qu'un modèle réduit allant sur l'eau. Sa résistance est de 3960 PSI et ne prend que 20 - 25 minutes à coller pour atteindre sa résistance maximale entre 15 et 24 heures. Avant l'application, il est nécessaire de nettoyer la surface de la saleté, la graisse, l'huile, peinture ou des débris. Elle vient dans deux tubes différents qu'il faut s'assurer de mélanger en parts égales. Format de 28,4 grammes.

Vous pourriez aussi aimer

Colle de menuisier Pro LePage, 3 l icon-wishlist
LEPAGE
Colle de menuisier Pro LePage, 3 l
Format 3L
Détails
N° d'article 0180090
Colle de menuisier Pro LePage, 400 ml icon-wishlist
LEPAGE
Colle de menuisier Pro LePage, 400 ml
Format 400ML
Détails
N° d'article 0180091
Adhésif à usages multiples 3M Super 77, transparent, 473 g icon-wishlist
3M SUPER 77
Adhésif à usages multiples 3M Super 77, transparent, 473 g
Format 473G
Détails
N° d'article 02095519
Super colle transparente, 20 g icon-wishlist
GORILLA GLUE
Super colle transparente, 20 g
Format 20GR
Détails
N° d'article 04035007
Colle de menuisier Pro LePage, 150 ml icon-wishlist
LEPAGE
Colle de menuisier Pro LePage, 150 ml
Format 150ML
Détails
N° d'article 0180043
Colle époxy transparente, 25 ml icon-wishlist
GORILLA GLUE
Colle époxy transparente, 25 ml
Format 25ML
Détails
N° d'article 04035013
Colle contact ultra robuste LePage, 946 ml icon-wishlist
LEPAGE
Colle contact ultra robuste LePage, 946 ml
Format 946ML
Détails
N° d'article 01805113
Super colle en gel, transparente, 20 g icon-wishlist
GORILLA GLUE
Super colle en gel, transparente, 20 g
Format 20GR
Détails
N° d'article 04035006
Colle de menuisier pro LePage, 800 ml icon-wishlist
LEPAGE
Colle de menuisier pro LePage, 800 ml
Format 800ML
Détails
N° d'article 0180134
Colle contact ultra robuste LePage, 250 ml icon-wishlist
LEPAGE
Colle contact ultra robuste LePage, 250 ml
Format 250ML
Détails
N° d'article 01805111
Colle contact ultra robuste LePage, 3,8 l icon-wishlist
LEPAGE
Colle contact ultra robuste LePage, 3,8 l
Format 3.8L
Détails
N° d'article 01805114
Colle Gorilla tout usage, extra forte, 59 mL icon-wishlist
GORILLA GLUE
Colle Gorilla tout usage, extra forte, 59 mL
Format 59ML
Détails
N° d'article 50015009
Colle instantanée icon-wishlist
KRAZY GLUE
Colle instantanée
Format 0.5MLxCR/4
Détails
N° d'article 0693006
Colle contact robuste LePage, jaune/beige, à base de solvant, séchage rapide, 500 ml icon-wishlist
LEPAGE
Colle contact robuste LePage, jaune/beige, à base de solvant, séchage rapide, 500 ml
Format 500ML
Détails
N° d'article 01805112
Colle époxy gris foncé en deux tubes 28,4 g icon-wishlist
J-B WELD
Colle époxy gris foncé en deux tubes 28,4 g
 
Détails
N° d'article 01105001
Colle super glue et activateur Instabond, 50 g/200 g, étanche, résistant à la chaleur icon-wishlist
INSTANTBOND
Colle super glue et activateur Instabond, 50 g/200 g, étanche, résistant à la chaleur
Format 50GR-200GR
Détails
N° d'article 64975001
Colle à bois séchage rapide «Express» icon-wishlist
LEPAGE
Colle à bois séchage rapide «Express»
Format 400ML
Détails
N° d'article 01805124
Colle à bois, 236 ml, blanche icon-wishlist
GORILLA GLUE
Colle à bois, 236 ml, blanche
Format 236ML
Détails
N° d'article 04035011
Époxy à prise rapide « ClearWeld(MC) », 25 ml icon-wishlist
J-B WELD
Époxy à prise rapide « ClearWeld(MC) », 25 ml
Format 25ML
Détails
N° d'article 01105010
Colle Gorilla, 118 ml icon-wishlist
GORILLA GLUE
Colle Gorilla, 118 ml
Format 118ML
Détails
N° d'article 50015010
Colle en aérosol polyvalente Elmer's, transparente, sans acide, multifonctions, 310 g icon-wishlist
ELMER'S
Colle en aérosol polyvalente Elmer's, transparente, sans acide, multifonctions, 310 g
Format 310GR
Détails
N° d'article 0693060
Colle à bois séchage rapide «Express» icon-wishlist
LEPAGE
Colle à bois séchage rapide «Express»
Format 150ML
Détails
N° d'article 01805123
Colle super glue transparente Superbond, 25 g icon-wishlist
SUPERBOND
Colle super glue transparente Superbond, 25 g
Format 25GR
Détails
N° d'article 64975002
Colle contact à faible odeur LePage, 1,5 l icon-wishlist
LEPAGE
Colle contact à faible odeur LePage, 1,5 l
Format 1.5LT
Détails
N° d'article 01805119
Colle Gorilla, imperméable, peinturable, beige pâle, 236 ml icon-wishlist
GORILLA GLUE
Colle Gorilla, imperméable, peinturable, beige pâle, 236 ml
Format 236ML
Détails
N° d'article 50015011

Would this product be suitable to attach a decorative piece back to an over the stove microwave ?

Posée par: Grated
SteelStik can withstand temperatures up to 300 degrees fahrenheit, you should be able to use this item for this application as long as the temperature doesn't get above that.
Répondue par: J-B Weld Customer Service
Date de publication: 2019-05-20

Will JB Weld fill a hole on a lawn tractor exhaust and withstand the heat?

Posée par: Beleafer
I would recommend using our J-B Weld original for this repair, which can withstand up to 550 degrees.
Répondue par: J-B Weld Customer Service
Date de publication: 2019-05-03
  • y_2021, m_12, d_6, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_fr_CA, sid_01105004, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Colle époxy étanche « Marineweld » en tubes 28,4 g est évalué 4.2 de 5 de 418.
Rated 5 de 5 de par Fixed Pool Filter & Vac Friend at work told me about how well this worked for him(fixed crack in toilet and screens inside DE pool filter). I had a slight crack in my Hayward cartridge pool filter at the pressure gauge and a cracked plastic arm on my Hayward pool vac. I cleaned both with a dremel wire brush to scuff up surface and cleaned with acetone. I used nitrile gloves and mixed by hand. In both cases I built up the surface to beef up the area and let it dry for an hour after which it was hard to touch. Put both in service and they both are still holding after a few hours. Saved me $100s in parts. We'll see how long it holds.
Date de publication: 2016-10-09
Rated 4 de 5 de par Solved leaking water tank for dehumidifier Reservoir tank for my dehumidifier developed small 1'' crack in its bottom [typical plastic quality]. Tank started to leak once less than one third full due to weight of water forcing through the fine crack. Unit itself still worked fine. So tried this repair putty and so far the crack is sealed and the reservoir tank is holding till normal fullness is reached. Only question now is how long the repair holds up against normal usage for removing and re-installing the tank after draining. Con comment applies to the chemical odor prior to hardening. Once the putty is set and hardened, there is no more odor.
Date de publication: 2014-10-09
Rated 5 de 5 de par Very solid and easy to use I have a standing lamp that has a 5 foot pole. It came apart at the base and the threads were stripped so I could not repair it. I got some of this kwik weld and it exceeded my expectations. I followed the simple directions. Mixed it on paper and applied it with a flat wooden stick. Popsicle stick is perfect. Then I smoothed it with my fingers. It was black for a black lamp so that was perfect too. I washed my hands immediately and they came clean with no problems. I let it cure for 24 hours and it felt strong and firm. I then put lamp back to use. This was 8 months ago and it is just like new! Use this and it will work. I can't wait to use it for another project!
Date de publication: 2013-06-26
Rated 5 de 5 de par This stuff is awesome! [This review was collected as part of a promotion.] In the process of installing an electric fan kit on my Jeep, I accidentally punched, not one, but two nasty birdshot-sized holes in my nearly brand new radiator. My dad did a little research and found this stuff. I bought a tube, kneaded bit together and sealed up the holes. Gave it about an hour and a half to set up, just to be sure. WOW! I am amazed at how hard it cured up and holds pressure. If this stuff will hold up to being used on a radiator, I am sold! Keeping the rest of the tube in the glovebox.
Date de publication: 2019-02-24
Rated 5 de 5 de par WORKS LIKE IT SHOULD! I have used this in the middle of noware to seal a 6 inch split in a gas tank that was draining out and I had no reserve or container to catch it. Mixed it up and applied to dirty tank and stopped the leak almost at once, hard enough to drive out in 15 minutes. Got home and dropped tank to repair right, had to GRIND all of it off to clean surface of tank for proper adhesion. (Filled tank with water for grinding.) Never leaked for the next 5 years I drove that car.
Date de publication: 2011-10-17
Rated 5 de 5 de par Cheap easy bulkhead repair [This review was collected as part of a promotion.] WaterWeld is a great product if you know what to use it for. It will easily mend any pipe (that is not under pressure) and will save you loads of time and money for repairs you aren't ready to do just yet. Just pinch off the amount you need, blend it in your hand, and cover the area the needs to be mended. It is self adhering and can hold a few hundred pounds. It can also be painted (coat it with a metal primer first) and it blends right into the original surface. My favorite use for J-B Weld is to patch rusted out bulkhead doors. After it dries you can sand and paint it, saving yourself hundreds of dollars on a new bulkhead door.
Date de publication: 2019-01-14
Rated 5 de 5 de par Works great I used this to patch up some hair line cracks in my toilet tank. I patched them from the inside of the tank and am just using this as a temporary fix while I find a replacement tank. That being said, this stuff is good. I did not attempt to apply this while the tank was full of water. Rather I emptied it and dried it out over night before applying. Kneeding the material is fine, though the contrast between the two colors needs improvement. Just err on the side of caution and over kneed this for about 3-5 minutes. Really get into it, tear it up, roll it around. Use gloves. I cleaned and sanded the spots on the inside of the tank, it adhered well. It dried rock hard in about an hour. No leaks.
Date de publication: 2017-04-16
Rated 4 de 5 de par Great Stuff I used this to fix a hole in the bottom of my dishwasher. The machine heating element burnt a hole in the bottom over time and water started to leak over the kitchen floor. The material was very easy to use, cured quickly and plugged the hole completely. This simple fix saved me from having to buy a new dishwasher. Worked as advertised, good stuff.
Date de publication: 2014-06-11
  • y_2021, m_12, d_6, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_418
  • loc_fr_CA, sid_01105004, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT