
Description
Ces cisailles de type aviation à bec long décalé CRAFTSMAN(MD) permettent de couper l'acier laminé à froid jusqu'à un calibre de 18 (1,2 mm) ou l'acier inoxydable jusqu'à un calibre de 22 (0,7 mm). Son loquet à ressort permet une utilisation rapide à une main et son arête trempée par induction est conçue pour rester affûtée plus longtemps. Sa lame présente des marquages tous les 1/4" (6 mm) pour des coupes rapides et précises.
- Garantie à vie complète de Craftsman
- Comprend une cisaille aviation à coupe longue et décalée
- Coupe l'acier laminé à froid de calibre 18 (1,2 mm) ou l'acier inoxydable de calibre 22 (0,7 mm) au maximum
- Loquet à ressort pour une opération facile à une main
- L'arête tranchante durcie par induction demeure affûtée plus longtemps comparativement aux mâchoires non durcies par induction
- Marquage de la lame de 1/4 de pouce pour des coupes rapides et précises
- Coupe au maximum de 0,05 pouce d'acier laminé à froid ou 0,28 pouce d'acier inoxydable
Caractéristiques
Peut être affûté
Non
Matériau de la lame
60CrV
Longueur de la lame (mm)
76.2
Longueur de la lame (po)
3
Longueur de la lame (cm)
7,62
Coupe
Coupe longue,
Capacité de coupe (diamètre) (cm)
0,127
Capacité de coupe (diamètre) (po)
0.05
Capacité de coupe (diamètre) (mm)
1,2
Capacité de coupe (calibre)
18
Longueur du manche/de la poignée (cm)
10,9982
Longueur du manche/de la poignée (po)
4.33
Longueur du manche/de la poignée (mm)
109,982
Matériau du manche/de la poignée
1050
Excentré
Oui
Utilisation principale
CVCA
Nom de la gamme
S.O.
Sous-marque
S.O.
Vous pourriez aussi aimer
Cisailles de type aviation Craftsman, 11 po, coupe longue décalée, rouge et jaune est évalué
de
5 de
31.
Rated 5 de
5
de
Smokymtnmiles par
Cuts Made Easier
[This review was collected as part of a promotion.] I’ve been needing metal snips for a variety of reasons, however, I made this purchase as a must buy. After our new kitchen floor was installed the metal kickplate on the dishwasher was too tall to be reinstalled. This product allowed me to cut a beautiful straight line and remove 1.25 “ of material. The kickplate fit back on the dishwasher and it looks like original. I will use these snips for a number things around the garage.
Date de publication: 2019-11-22
Rated 5 de
5
de
gmaw par
snips
[This review was collected as part of a promotion.] I love these they even cut thru my dogs rawhide treats when they are too big
Date de publication: 2019-01-15
Rated 5 de
5
de
Herb par
Feels like good quality
Used to cut vinyl siding. Easy to use. Nice cutting.
Date de publication: 2022-01-09
Rated 5 de
5
de
Sharon par
Craftsman Snips
Great tool to cut metal roofing.
Date de publication: 2019-11-13
Rated 5 de
5
de
CaptainSkippy par
Cuts through anything!
[This review was collected as part of a promotion.] Bought these to cut the edges off some shingles and they far exceeded my expectations. Since then I’ve used them on hardware cloth and rabbit wire. They’re amazing.
Date de publication: 2019-05-09
Rated 5 de
5
de
Steve par
metal snips
[This review was collected as part of a promotion.] with the angled jaws this pair of metal snips made short work of my project. there was no binding and my hands were above my work so I didn't have to worry about getting my glove (or Hand) cut from the sharp edges.
Date de publication: 2019-05-16
Rated 1 de
5
de
Jr2970 par
Horrible dont waist your money.
Horrible do not buy. I got fooled by the craftsman name. If your trying to cut foil these will work just fine. But if your doing actual work with them good luck. They have a lifetime warranty but its probably because you will never use them.
Date de publication: 2020-08-11
Rated 5 de
5
de
Downtown par
Craftsman has a new home.
[This review was collected as part of a promotion.] Wonderful ships, cut flooring over three days and they worked great. Stayed sharp and are very comfortable to use...look forward to many years of use. Thanks Craftsman!
Date de publication: 2018-11-05