• icon-wishlist
  • icon-cart
Voir tous les produits CRAFTSMAN

Boîte à onglets avec scie, 12", rouge et noir

N° d'article 00276899 N° de modèle CMHT20600 Format 12"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.


Cette boîte à onglets de Craftsman(MD) est indispensable pour faire des angles parfaits à tout coup. La scie à dos incluse vous permettra de couper entièrement vos morceaux sans toutefois couper la boîte elle-même. La boîte permet des coupes à 90° et à un angle de 45° en plus de différents angles d'attaque : 45° et 22,5° à gauche, 90°, et 45° et 22,5° à droite. Les tiges en forme de came incluses permettent de retenir solidement votre morceau pour assurer une coupe parfaite. Des compartiments intégrés permettent de ranger les tiges et des crayons dans la boîte à onglets.
  • Les broches en forme de came se tordent et se verrouillent avec la base en nid d'abeille pour sécuriser le travail et obtenir des coupes précises
  • Coupe d'onglet à des angles de 45° et 90°, angle de tête de 45° et 22,5° pour les formes octogonales
  • La lèvre allongée de la base maintient la boîte à onglets en place pendant la coupe et une butée de scie intégrée empêche de couper dans la boîte à onglet
  • Bacs de rangement moulés pour les doigts inclinés et les crayons


Angle d'ouverture (degrés)
90 degrés
Longueur de la lame (cm)
35,56 centimètres
Longueur de la lame (po)
14.0 pouces
Longueur de la lame (mm)
355,6 millimètres
Profondeur de la boîte (cm)
6,35 centimètres
Profondeur de la boîte (po)
2.5 pouces
Profondeur de la boîte (mm)
63.5 millimètres
Degré de l'angle
22-1/2; 45; 90,
Composition de la poignée/du manche
Haut impact polypropylène
Description de modèle
12 po Saw and Collier Onglet Boîte
Contenu de l'emballage
Comprend (1) boîte à onglets, (1) scie et (2) goupilles à came
Dents par pouce
À vie

Vous pourriez aussi aimer

Boîte à onglets avec scie à dos Fuller, plastique résistant aux chocs, 4 angles de coupe, 14 po de long icon-wishlist
Boîte à onglets avec scie à dos Fuller, plastique résistant aux chocs, 4 angles de coupe, 14 po de long
N° d'article 70155067
Boîte à onglets en plastique ABS avec scie Project Source à lame en acier au carbone, 14 po icon-wishlist
Boîte à onglets en plastique ABS avec scie Project Source à lame en acier au carbone, 14 po
Format 14"
N° d'article 19225248
Guide de coupe icon-wishlist
Guide de coupe
N° d'article 0121115
Boîte à onglets, 12" icon-wishlist
Boîte à onglets, 12"
Format 12"
N° d'article 01215307
Boîte à onglets icon-wishlist
Boîte à onglets
Format 12"
N° d'article 00335284
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Boîte à onglets avec scie, 12", rouge et noir est évalué 3.7 de 5 de 114.
Rated 5 de 5 de par Better Then Expected I wasn't expecting much from such an inexpensive miter box and saw combo, but it has come in so handy when needed, although I generally use it for cutting smaller stock. The cam shaped pins holds your work well and keeps the saw in place for storage. I use edge grommet material to protect the blade when not in use. I also mounted the box to a short board with a lip that holds the box against the edge of the work bench, or any other available surface, to prevent it from moving back and forth. I've read the negative review, but I'm quite happy with mine. It would be hard to beat for the price.
Date de publication: 2020-07-06
Rated 1 de 5 de par Disappointing I knew the limitations of buying a plastic mitre box before I bought, but I just wanted to cut some lumber square without dragging out the power equipment every time. To my surprise, the limitation of this assembly isn’t the box, it was the saw. The saw continually binds up regardless of pressure to the point that it would take 10 minutes per cut to get through. I scrapped this after a few tries after determining it would be easier to drive to the storage unit a power cut and drive back instead of using this simple saw. I’ve used other mitre boxes/saws, and I can’t explain why this was soooo bad, but it truly was.....
Date de publication: 2019-03-17
Rated 4 de 5 de par Great result - but a bit hard to handle. Man! I don't know if I used it right. It was very hard to cut. I often had to remove the saw and go in just one direction. It took a long time and required much effort. HOWEVER - it was very simple to use and the end results were great. I didn't have to repeat a single cut because of an uneven line. Used for making a TV frame. It turned out really nice. My only complaint is how much work it required -- however, I don't know that a design improvement would have made any difference.
Date de publication: 2021-07-21
Rated 5 de 5 de par Great miter box setup [This review was collected as part of a promotion.] This miter box and saw has been really great in cutting trim for home renovations and other small projects. I especially appreciate the feature which locks the wood into the box so there’s no sliding around and cuts are accurate.
Date de publication: 2019-06-04
Rated 4 de 5 de par Miter box with saw [This review was collected as part of a promotion.] Good for the price. It's good for small molding like base,cove or quarter round. Not as good for crown.
Date de publication: 2018-12-30
Rated 4 de 5 de par Great for cutting angles on small projects. I had some issues with getting my outside corner trim, so I bought this miter saw. It allowed the saw to get through the grooves easily and the saw seemed to cut with easy strokes. The miter saw provided all three angle degree's that are typical standard cutting angles. For trim and molding this was convenient for on the spot cutting. If its nailed down for stability it's a plus. It got the job done.
Date de publication: 2021-05-28
Rated 5 de 5 de par Craftsman miter box [This review was collected as part of a promotion.] Great product for small or large project cuts. I screwed the miter box to one of my saw horses and ran my base mold down the other to hold it straight, it can also be used on the ground. Give me quick precise cuts each time and I am flying through my home remodel. The plastic hold up great even when I get cutting to fast and cut into it.
Date de publication: 2018-11-16
Rated 3 de 5 de par Simple Saw solution [This review was collected as part of a promotion.] The saw and miter box meet a need. The combination is a not a precision system but it is inexpensive and gets the job done. I used it to cut cedar planks to line a closet and it worked. It is hard to predict how long it would stand up to heavy use but for small projects where power tools aren't readily available it makes it easy to get fairly straight cuts at common angles. The included pegs that are meant to keep the saw straight to maintain a small straight kerf weren't useful for this project as the planks weren't sized to accommodate the peg holes but they may be heloful on other projects. I was a skeptical of using a plastic box but it held up for the project and doesn't show any serious wear and tear. The saw is not premier quality but it does work and I think is worth the price.
Date de publication: 2019-03-10
  • y_2022, m_8, d_7, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_114
  • loc_fr_CA, sid_00276899, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 3ms