Voir tous les produits
DEWALT
Description
Ce banc de scie Dewalt est équipé d'un moteur de 15 ampères produisant 5800 tr/min, ce qui vous permettra de couper facilement et rapidement le bois dur. Le réglage du guide à double crémaillère et à pignon permet un ajustement plus rapide, régulier et précis. Le format compact du banc de scie facilite le transport et le rangement, sans oublier sa capacité de refente de 24,5 pouces pour le contreplaqué 4 x 8 et les panneaux OSB. Plus solide qu'une base en plastique, la cage de protection en métal offre une plus grande durabilité. Le revêtement de la table permet de réduire la friction pour des coupes nettes. Cette scie de 46 lb se déplace facilement de la maison vers le chantier. Il est d'ailleurs équipé d'un conduit d'évacuation de la poussière afin de pouvoir brancher un tuyau d'aspirateur de 2 1/2 pouces pour minimiser le nettoyage.
Caractéristiques
Modèle
DWE7485
Alimentation
À fil
Lame
8 1/4 po
Capacité de refente
24,5 po
Profondeur de coupe
2 9/16 po à 90°
Composante
Metal et composite
Couleur
Jaune et noir
Dimensions de la lame
8 1/4 po
Longueur
22,75 po
Tours par minute
5800 tr/min
Garantie
Garantie limitée de 3 ans
Poids
46 lb
Voltage
Relâchement de l'interrupteur sans voltage pour sécurité accrue
Hauteur
13 po
Diamètre de l'arbre
5/8 po
Produits fréquemment achetés ensemble
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053
Vous pourriez aussi aimer
DEWALT
Banc de scie avec support à roulettes Dewalt, 10 po, 15 A
Format 10"x15A
Détails
N° d'article 00275708
BOSCH
Banc de scie de chantier Bosch 4100XC-10 avec fil, 10 po, pied à roulettes Gravity-Rise
Format 10"x15AM
Détails
N° d'article 19836366
KOBALT
Banc de scie Kobalt de 15 A, pointes au carbure, 10 po
Format 10"x15AM
Détails
N° d'article 41095003
METABO HPT
Banc de scie avec support à roulettes Metabo HPT, 10 po, 15 A
Format 10"x15A
Détails
N° d'article 37815184
BOSCH
Scie à table de chantier avec pied à roulettes, 10"
Format 10"x15AM
Détails
N° d'article 19836270
CRAFTSMAN
Banc de scie Craftsman de 10 po, lame à pointe en carbure
Format 10"x15AM
Détails
N° d'article 97925013
METABO HPT
Banc de scie Metabo HPT de 36 V, 10 po, sans fil
Format 10"x36V
Détails
N° d'article 37815211
where is it made
China
Date de publication: 2021-06-08
Are you able to put a dado stack on this saw
No, arbor is too short for a dado stack.
I believe the 7491rs is dado blade compatible.
Date de publication: 2021-06-08
Does this product (DeWalt 8.25" table saw) come with the foldable DeWalt table to sit on? (the photos on your website include the stand)
Search for Dewalt product # DW7451 or Lowes item # 845504.
Date de publication: 2021-05-20
Is there a 12 month equal payment plan on all dewalt table saws.
Banc de scie Dewalt compact pour chantier, Lame de 8 1/4 po, 15 A est évalué
de
5 de
98.
Rated 4 de
5
de
Aeronaught par
Nearly very good
So this is in general a well built and high quality product.
But there are a few snags which need to be addressed
The instructions are the pits. Badly written and confusing. OK in the end you sort it out, but why are the diagrams and part identifications on a different page requiring much page turning back to understand?
The miter gauge is rubbish. Way too much slop on the fit, making repeatability an issue when used for making good quality items. Probably OK for a job site if you don't mind your house not to be upright! Shame because this could be a good saw for accurate carpentry.
Well built in general, sturdy and durable.
Date de publication: 2020-05-20
Rated 5 de
5
de
Peltrie par
Excellent Little Compact Fireball!
I have use it for a couple of days for a total of about 10 hours and I'm very impressed. I've moved from a Bosch 4100, which was giving me alignment issues which was causing major frustration. The wife on my back, so I decided to try a Dewalt. Couldn't find the 745 and decided on the DWE7485. Glad I did. I'm use to using a 10" blade but wasn't opposed to to a smaller. If your in the trade of construction and carpentry, I can understand it. I'm just into woodworking. I have a one car garage shop, so it fits very well. If your in the market you can't go wrong. There will always be haters and naysayers who just love to be negative. If it's not for you find another brand. This is my first Dewalt purchase though I have been using the product for over 15 years for work.
Date de publication: 2020-04-08
Rated 5 de
5
de
i1024get par
My First Table Saw
This is the first table saw I've ever purchased. I did lots of research and came to the conclusion that this was the product for me. I looked at the 10" table saw and was a bit leary of the availability of 8.5" blades but ultimately decided that this saw would surpass my needs as a DIY, garage woodworker. This saw ran perfectly right out the box. The fence is 100% straight. The only time I got a bad cut was when I neglected to ensure the fence was properly resting in the back notch (my goof).
I've always trusted the Dewalt name. It goes back to my dad being an electrician and only using Dewalt products. I don't mind paying the extra money for the Dewalt name as I know I am purchasing a quality product.
Date de publication: 2021-01-25
Rated 5 de
5
de
BrynJK par
Great Saw
[This review was collected as part of a promotion.] Just got mine delivered a couple days ago. Bought the saw because I had to rip 12’ pieces of shiplap. Saw did awesome on these long cuts. Blade did nice clean cuts. The legs being outward and flat on top made it easy to clamp down (not sure it really needed to because it felt pretty sure footed already). Like that all the accessories have locations on the saw to be stored. like also that saw base and guard both have vacuum connections. Push stick was included. Other reviews of the previous model said the miter jig was loose and plastic. But this one is all aluminum/steel and had no slop-fit well. Only wish it could use a dado. Really think a great saw for the money.
Date de publication: 2020-05-31
Rated 5 de
5
de
Mortyman par
Awesome saw with a few minor setbacks
Bought my saw 2 months ago and I love it. A must have for any workshop! Aside from a few mino-r setbacks, only that it will not accept a Dado Blade and you can only rip to a 24" width. But for an " saw its ideal. A friend of mine who is a professional carpenter for one of Canada's major restoration companies put me onto this saw as it will provide me with everything I need. I do boat restoration work on the side and have found it compatible for the type of work I do. Only wish that it had a physical lock out feature on the power switch. Therefore I place a luggage padlock through the hole on the prong of the power cord when not in use.
Date de publication: 2021-06-05
Rated 5 de
5
de
Nomosudz par
Great little saw.
Fantastic product. Does everything it's supposed to do and does it very well. Great rip capacity, and the fence adjustment is dead on accurate. I bought this to build our kitchen island, in conjunction with my chop saw. You can do almost everything with that combination, and a couple of foldable worktables.
Watch out for price drops, which only last a couple days. Not sure what that's all about. Get a screenshot of it (I didn't ), and you should be alright.
Date de publication: 2020-08-23
Rated 5 de
5
de
ericTreeLight par
Awesome little saw
You can't use a dado set, but for everything else this saw is a gem! I particularly love the rack & pinion fence system, and the way it adjusts out wide for panel cuts.
The table footprint is small, so for large panels you'll need infeed- and outfeed-support, but you should have those anyway.
I love this little guy. The one design flaw I see is that the lever which controls tilt tends to vibrate loose, causing the blade to drop slightly out of square. Solved that problem by jamming a couple of rubber erasers into the groove behind it. (But it's a good idea to check for square before using it, in any case.)
Date de publication: 2021-04-28
Rated 5 de
5
de
SoCal Kramer par
Versatile compact beast
I’ve had for over a month and this saw is doing everything I need it to do and It’s doing it very well. My most recent cuts I’ve been making have been with a 1/4 inch Dado blade. The depth of my cuts have been 1/2 inch. The saw has need handling it very well. In regards to using a Dado blade; 1/4” is the widest cut you can make with this saw.
Date de publication: 2020-04-19
LIENS PRATIQUES
Services aux consommateurs
Circulaire
◊Achat en ligne
Livraison le jour même
Déclaration relative à la vie privée
Conditions d'utilisation
Exclusivités web
Politique de prix
Plan de protection
Retours et remboursements
Livraison des électroménagers
Informations sur les promotions
Aide et FAQ
Contactez-nous
Trouvez un magasin
Retours et commandes
À propos de RONA
