Voir tous les produits
DEWALT
Description
Ce banc de scie Dewalt est équipé d'un moteur de 15 ampères qui coupe facilement et rapidement les bois durs. Sa capacité de refente de 32 pouces permet de couper facilement des matériaux plus larges tels que des tablettes et des moulures. Le réglage du guide à crémaillère et à pignon télescopique permet un ajustement rapide, régulier et précis. Le support à roulette est conçu pour un montage et un démontage faciles et stables. De plus, il est équipé d'un conduit d'évacuation de la poussière afin de pouvoir brancher un aspirateur de 2 1/2 pouces pour réduire le temps de nettoyage une fois le projet terminé.
Caractéristiques
Tours par minute
4800
Profondeur de coupe
3 1/8" (90°) - 2 1/4" (45°)
Inclus
Lame au carbure de 10" à 24 dents, support à roulettes, bâton-poussoir, guide à onglet, guide à refente, 2 clés d'ajustement
Diamètre de l'arbre
5/8"
Ampérage
15 A
Capacité de refente
32 1/2" (droite) - 22" (gauche)
Garantie
Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 30 jours
Dimensions de la lame
10"
Produits fréquemment achetés ensemble
DEWALT
Lame de scie de construction DeWalt, 3 pièces, 10 po dia, 32DT et 60DT, dents en carbure de tungstène
Format 10"x32-60DTxPK3
Détails
N° d'article 00275578
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
Détails
N° d'article 32045053
Vous pourriez aussi aimer
DEWALT
Banc de scie Dewalt compact pour chantier, Lame de 8 1/4 po, 15 A
Format 8 1/4"x15AM
Détails
N° d'article 00277225
BOSCH
Banc de scie de chantier Bosch 4100XC-10 avec fil, 10 po, pied à roulettes Gravity-Rise
Format 10"x15AM
Détails
N° d'article 19836366
METABO HPT
Banc de scie avec support à roulettes Metabo HPT, 10 po, 15 A
Format 10"x15A
Détails
N° d'article 37815184
KOBALT
Banc de scie Kobalt de 15 A, pointes au carbure, 10 po
Format 10"x15AM
Détails
N° d'article 41095003
BOSCH
Scie à table de chantier avec pied à roulettes, 10"
Format 10"x15AM
Détails
N° d'article 19836270
CRAFTSMAN
Banc de scie Craftsman de 10 po, lame à pointe en carbure
Format 10"x15AM
Détails
N° d'article 97925013
METABO HPT
Banc de scie Metabo HPT de 36 V, 10 po, sans fil
Format 10"x36V
Détails
N° d'article 37815211
Can you use a dado blade on this saw
Of course.
Date de publication: 2020-10-28
how do I change the bevel angle on a DWE 7491 table saw
If you look at the front of the saw, theres a lever handle right below the "wheel" that adjusts the heigh of the blade up and down. If you pull that handle to the right, you can then slide it to whichever degree you would like. I hope this makes sense what I am saying. Good luck!
Date de publication: 2021-01-11
Can I buy the stand separately?
Dewalt does make a rolling saw stand,Dw7440rs. This can be purchased by itself, and looks to be almost identical to the one that comes with the 7491rs table saw
Date de publication: 2018-07-11
I the dwalt portable jobsite table saw good for making perfect cuts to make cabinet doors with the correct blade.
What is the rip capacity?
Can I buy this saw without the stand?
Banc de scie avec support à roulettes Dewalt, 10 po, 15 A est évalué
de
5 de
658.
Rated 5 de
5
de
Alex par
Don't waste money on anything else
I did a lot of research and looked at many models before finally buying this saw. I spent more than I had planned but am very glad I did. I looked at the ridgid, delta, kobalt, porter cable, rockwell, masterforce, Performax and craftsman portable table saws while shopping around and all of them had poor fences, and some were useless. What's the point of a table saw if the fence doesnt consistently lock down straight. Dewalts rack and pinion system far surpasses any other manufacturers fence system.Also many of the other mentioned brands use plastic gears for the blade height adjustments. To top it off dewalt has has the largest rip capacity.
Date de publication: 2016-06-10
Rated 5 de
5
de
BtB Bob the Builder 1 par
Simply: THE BEST
[This review was collected as part of a promotion.] I bought this table saw last summer and it is not just the best job-site table saw I have ever used....it is the best, most well thought out tool of any kind that I have ever owned. It is astonishing to me that other brands have not copied this fence design. It is SOOOOO easy and sooooo accurate. I have had cheaper table saws, and I have seen more expensive saws (such as the Bosch model within the same price range (about $100 more, actually). But how it is that this type of fence is not an industry standard is baffling to me. I have, within the past year switched over to all DEWALT power tools.
Date de publication: 2019-06-27
Rated 5 de
5
de
Hudsynsdaddy par
Awesome purchase for a DIYer!!!
Used this to build my kids clubhouse in our basement. Right out of the box this is a quality piece. Simple to set up and light enough to carry around. Used a different blade than what came with it so can't vouch for its abilities, but the job site table saw itself performed flawlessly! Hooked it up to my "shop vacuum" and it did great using it indoors. Not real loud, used it in the basement with my toddler sleeping upstairs without waking him. Would highly recommend. My only complaint is the flimsy piece for pushing angles through the saw. It's the only piece that is not that accurate(too much play). Everything has exceeded my expectations!!
Date de publication: 2015-01-03
Rated 5 de
5
de
Dave52 par
Easy Setup, great saw
I bought this after reviewing several table saws. Working alone I had it assembled in under an hour, and it was almost perfectly set up right out of the box. I had to make one extremely small tweak in the fence alignment and
another in the splitter. The latter was a little bit confusing as the instructions and photos were not perfectly clear, but once I started adjusting I could see what to do. First crosscuts were right on the money and the first test rip was perfect. The rip fence scale is right on the money. I am very happy that I made this choice. The miter gauge seemed to be the one weak link, but even that proved to be accurate when I used it.
Date de publication: 2018-11-03
Rated 5 de
5
de
Bruce par
First time using a table saw
[This review was collected as part of a promotion.] So my son asked me to help him install a luxury vinyl plank floor in two rooms. I have never done one, am not a carpenter, and have never used a table saw. I shopped table saws and watched YouTube videos, and was impressed with the Dewalt saw. The fence was easy to adjust and remove, and the rack and pinion adjustment was easy to change. The saw was light enough for me to move alone. I ran the saw for two days while the rest of the family placed the flooring, and had no problems. I also used the miter attachment for the quarter round cuts. A really first rate tool!
Date de publication: 2019-01-15
Rated 4 de
5
de
iceman par
dewalt table saw
I haven't put this through the full test yet, only made some test cuts to check blade alignment (all was good right out of the box).
it does seem to be a very good quality saw. I really like the rack & pinion fence adjustment and the dust port. the adjustments for blade height and angle work very smoothly, and the angle adjustment locks in place very firmly. a few people complained about the miter slot being loose, but mine seems to be very snug. at least it's a standard size, so I will be able to upgrade whenever I feel the need to.
I plan to put it through it's paces this weekend, and maybe I can do a better review later.
Date de publication: 2014-05-16
Rated 5 de
5
de
Lito par
Awesome table saw!
[This review was collected as part of a promotion.] I was looking for an upgrade to my very old Skill table saw. I was reviewing different table saws for my budget of up to $300. What sold me on this table saw was the Rack and Pinion system for the fence. Basically it moves the fence left or right always parallel to the blade. If the rail is free of debris, it allows you to setup your fence up to 1/32 of an inch (a little blow of air does the trick). So far this table saw is the best for me! I’m doing a lot of projects with this saw including the dog bed on the picture attached; this table saw is super powerful, a workhorse!
Date de publication: 2019-04-21
Rated 4 de
5
de
CedarSavage par
One thing missing -
I have been using this saw fro a few months now. I love it. Fence is always dead on accurate and so fast to set up its amazing how well thought out everything is. JUST ONE THING MISSING. Electronic power switching keeps you from plugging in a saw that already has the power on. This means you can not lock it in the on position to power it from a power strip that also powers the dust collection. I use a shop vac that just sits under the saw but its a bit annoying to have to feel around for the switch on the vac. I like the electronic power switch, its a no-brainer safety thing, but why not include an aux plug that is powered by the same switch so my vac starts when I power the saw.
Date de publication: 2017-12-21
LIENS PRATIQUES
Services aux consommateurs
Circulaire
◊Achat en ligne
Livraison le jour même
Déclaration relative à la vie privée
Conditions d'utilisation
Exclusivités web
Politique de prix
Plan de protection
Retours et remboursements
Livraison des électroménagers
Informations sur les promotions
Aide et FAQ
Contactez-nous
Trouvez un magasin
Retours et commandes
À propos de RONA
