
Description
Procurez-vous ces agrafes multicâbles SnapShot pour organiser et sécuriser plusieurs ensembles de câbles dans vos maisons ou votre bureau. Ce produit au design unique permet de regrouper des câbles détachés. Son polypropylène est ignifuge, ce qui augmente sa durée de vie et rend le tout sécuritaire. Finalement, les clous sont inclus et accélèrent ainsi son installation.
Caractéristiques
Type
Attache pour câble
Composante
Plastique robuste
Emballage
Paquet de 8
Couleur
Rouge
Vous pourriez aussi aimer
Agrafes multicâbles Gardner Bender, rouge, polypropylène, paquet de 20 est évalué
de
5 de
23.
Rated 5 de
5
de
ruly par
Best solution for multiple cables
Our inspector would not approve more than one cable under a standard staple. These are approved for multiple cables (up to 4 I think?). The inspector liked them. They are also easy to install and easy to use, plus if you have to remove a cable, one side snaps loose so any or all the cables can be removed or added after the stable is installed, much easier than with standard staples. The only trick to these is once you start hammering the nail in, you have to keep the staple from sliding, if it does the little alignment tab bends and sticks out and may be a small problem for sheet rock installation. When that happened I just took a box cutter and cut the little tab off if it was sticking out.
Date de publication: 2014-04-15
Rated 5 de
5
de
saboken1 par
Great Idea
I have not used them yet but upon a closer look these clips will make removing all the knob and tube from my basement and replace it with romex much easier and safer! I plan on running 4 lines down each side of the center header in my basement, I was going to staple each line separate but this will allow me to remove each line for whatever reason I may need in the future with out having to pull a bunch of staples and there is no risk of damaging the romex hammering staples over the wires. I don't know if these are code approved but my town doesn't seem to care much anymore due to the economy here and my house was built in the 1800's so anything is safer than the wiring that was in it when I purchased it.
Date de publication: 2012-06-03
Rated 3 de
5
de
Chris par
May have other uses
I initially tried to use this with NM cable in a vertical 2X4 frame wall. It doesn't hold the cables tight enough to meet the intent of article 300.4(D) unless you put them very close together.
It might be a good way to support low voltage or signal cables, but the mount makes it had to use if you want to use it from other than from the edge of a board - for instance in the center of a ceiling joist of a basement.
Date de publication: 2012-01-23
Rated 4 de
5
de
BB par
Great sorting clip for home theater wiring.
Good product, easy to use. Lots of volume to sort low voltage wiring. I ran 2 HDMI, 5.1 stereo, cable, 2 CAT6, with room to spare.
Date de publication: 2017-07-01
Rated 5 de
5
de
Zach par
Clearance
[This review was collected as part of a promotion.] I saw these on clearance and bought them on a whim. Knowing that I have some electrical work ahead of me. It’s a great idea and this will help me organize my wiring. I’m a bit of a stickler for organization and straight lines. This is great!
Date de publication: 2019-08-11
Rated 5 de
5
de
MsOutdoorsy par
Keeps cables neat
[This review was collected as part of a promotion.] Granted these should be used for big jobs but I still wanted them to organize the cables going in to my small breaker panel in the shed. they install easily and keep everything nice and neat.
Date de publication: 2019-05-30
Rated 5 de
5
de
Sable par
Handy wire staple
[This review was collected as part of a promotion.] These staples are very handy for running multiple wires. The clip that holds them can be opened and re-latched as often as needed.
Date de publication: 2019-02-03
Rated 4 de
5
de
RC par
Cable holder
[This review was collected as part of a promotion.] Sturdy enough. Sometimes the snap edges come open. You can bend it up a little and it gets better.
Date de publication: 2019-01-29