Adhésif PL 400 LePage pour sous-planchers et terrasses, 295 ml

Thank you for the question. LePage PL 400 may or may not work for the application described. You should test for adhesion and compatibility to determine suitable and acceptable results that meet your expectations, before using in your project. Depending on the type of rubber you have and the nature of the project you might consider LePage PL Premium as a better alternative.

LePage PL 400 Subfloor & Deck Adhesive hardens completely once fully cured.

Thank you for the question. The LePage PL400 Sub Floor Construction Adhesive is a gun grade product and not suitable for troweling purposes. Coverage for this product is measured only in lineal feet of extruded adhesive bead. For a 295 ml. cartridge: A ¼” (6 mm) bead extrudes approximately 30.6 ft (935 m). A 3/8” (9.5 mm) bead extrudes approximately 13.6 ft. (4.1 m). Without knowing the project details, it is not possible to provide any further information. However, if you are considering a cork floor that is designed for gluing you might consider a water-based contact cement which may be better suited and commonly recommended in the flooring industry.