• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Ponceuse orbitale à vitesse variable Dewalt, 5", 3A

Article #00276219 Modèle #DWE6423K Format 5"x3AM
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Ponceuse orbitale à vitesse variable Dewalt, 5", 3A

icon-wishlist

Description

La sableuse orbitale DEWALT DWE6423 de 5" à orbite aléatoire et à vitesse variable de 5" est équipée d'un moteur de 3 ampères qui offre entre 8 000 et 12 000 OPM. Le contrepoids séparé réduit les vibrations et, avec la poignée en caoutchouc surmoulée, permet un ponçage confortable. Un design plus court permet aux utilisateurs d'être plus près de la surface de travail et le sac à poussière à verrouillage d'une seule main se fixe solidement à la ponceuse pour faciliter la collecte de la poussière. Comprend un (1) ponceuse DWE6423, un (1) sac collecteur de poussière et un (1) sac de transport. Garantie de remboursement de 90 jours. Garantie limitée de 3 ans. Contrat de service gratuit de 1 an.

Caractéristiques

Moteur
À orbite aléatoire
Type
Ponceuse orbitale électrique
Modèle
À orbite aléatoire
Ampérage
3 A
Orbites par minute
8000 - 12 000
Poignée
En caoutchouc surmoulée
Dimensions du disque
5"
Inclus
Un (1) ponceuse DWE6423, un (1) sac collecteur de poussière et un (1) sac de transport
Garantie
Garantie de remboursement de 90 jours. Garantie limitée de 3 ans. Contrat de service gratuit de 1 an.
Poids
2,9 lb (1,32 kg)
Source d'alimentation
Électrique

Vous pourriez aussi aimer

Ponceuse à ruban avec fil, 21" x 3", 7 A, 800 pi/min icon-wishlist
CRAFTSMAN
Ponceuse à ruban avec fil, 21" x 3", 7 A, 800 pi/min
Format 3x21"x7AM
Détails
Article #00276572
Ponceuse de finition, 1/4 de feuille, 2 A, 13 500 orb./min icon-wishlist
CRAFTSMAN
Ponceuse de finition, 1/4 de feuille, 2 A, 13 500 orb./min
Format 2AM
Détails
Article #00276573
Ponceuse omnidirectionnelle sans fil - 18 V icon-wishlist
MAKITA
Ponceuse omnidirectionnelle sans fil - 18 V
Format 5"x18V
Détails
Article #11975341
Ponceuse de finition électrique à feuille 1/4, 2 A icon-wishlist
MAKITA
Ponceuse de finition électrique à feuille 1/4, 2 A
Format 2A
Détails
Article #1197318
Ponceuse orbitale aléatoire de 5", 3 A, 12 000 orb./min icon-wishlist
CRAFTSMAN
Ponceuse orbitale aléatoire de 5", 3 A, 12 000 orb./min
Format 5"x3AM
Détails
Article #00276574
Ensemble de 2 ponceuses icon-wishlist
MAKITA
Ensemble de 2 ponceuses
Format 2MXx3-1.6AM
Détails
Article #11975277
Ponceuse de finition 1,6 A icon-wishlist
MAKITA
Ponceuse de finition 1,6 A
Format 1.6AM
Détails
Article #11975196
Ponceuse orbitale, 5 po, 2,4 A icon-wishlist
DEWALT
Ponceuse orbitale, 5 po, 2,4 A
Format 5"x2.4AM
Détails
Article #00275896
Ponceuse à main 2 A icon-wishlist
SKIL
Ponceuse à main 2 A
Format 2.0A
Détails
Article #19835502
Ponceuse orbitale 18 V icon-wishlist
MAKITA
Ponceuse orbitale 18 V
Format 5"x18V
Détails
Article #11975293
Ensemble de 2 ponceuses, orbitale et aléatoire icon-wishlist
BOSCH
Ensemble de 2 ponceuses, orbitale et aléatoire
Format ENS2
Détails
Article #19836316
Ponceuse/polisseuse à mouvement orbital aléatoire, 6" icon-wishlist
BOSCH
Ponceuse/polisseuse à mouvement orbital aléatoire, 6"
 
Détails
Article #330614133
Outil de ponçage/polissage à mouvement aléatoire, 2,5 A, 5'' icon-wishlist
BOSCH
Outil de ponçage/polissage à mouvement aléatoire, 2,5 A, 5''
Format 5"x2.5AM
Détails
Article #19835934
Polisseuse à mouvement orbital aléatoire Bosch, 6" icon-wishlist
BOSCH
Polisseuse à mouvement orbital aléatoire Bosch, 6"
 
Détails
Article #330609786
Ponceuse 1 vitesse magnésium de 2,4 A icon-wishlist
DEWALT
Ponceuse 1 vitesse magnésium de 2,4 A
Format 2.4AM
Détails
Article #00275895
Ponceuse à bande large Triton, 4" x 24", 1200 W icon-wishlist
TRITON TOOLS
Ponceuse à bande large Triton, 4" x 24", 1200 W
 
Détails
Article #330668682

i need the part , round thing to adhere the sand paper to its rubber base

Posée par: berretti
DeWalt Pad Assembly #DWB-N329079
Répondue par: Tedson99
Date de publication: 2018-08-11

Does it include the carry bag as well ?

Posée par: Jtoeas
Yes it does.
Répondue par: MiGGs
Date de publication: 2018-06-20

Any attachment for buffing for this sander.

Posée par: Squash

What is the Dewalt part number for the vacuum adapter for this sander?

Posée par: Atomicboy
  • y_2020, m_1, d_15, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_fr_CA, sid_00276219, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Ponceuse orbitale à vitesse variable Dewalt, 5", 3A est évalué 4.6 de 5 de 262.
Rated 4 de 5 de par Great sander, but loud and messy This sander is great in many ways. Pros: Super light weight, sanding sheet is adhered to a foam base that makes the sanding even at angles or on uneven surfaces, Can connect to a shop vac for dust collection, great price Cons: Lame dust collector - You might as well not have that dust collector on the end because it barely collects a thing. After attaching the shop vac to the end instead, there was a dramatic difference in the flying dust. The cord is super short IMO. It is VERY loud. After sanding some still-hanging doors for 15 min, I felt like my hearing was severely damaged for a good bit of time. I'll wear ear protection next go around.
Date de publication: 2018-05-03
Rated 5 de 5 de par Great Sander Purchased this as a replacement to an older Porter Cable 5 hole sander that finally bit the dust (no pun intended) when I accidentally dropped it on the floor. This sander is much quieter, has a much nicer dust bag that actually works until full, and fits my hand better than my old PC. I probably would have purchased the variable speed model, but they were out of stock and I needed something that day to complete a project. This one was about $30 cheaper and after thinking about it, can't recall a situation where I wished I had a variable speed model anyway. Thank you again DeWalt.
Date de publication: 2016-02-14
Rated 5 de 5 de par Nice Sander Okay this review is going to be kinda sexist, as I am going to talk to all the DYI LADIES! So you DYI men with bulky muscles just stroll on by. Ladies if you are needing a ROS sander and don't have the muscles of a contractor then this sander is perfect. It has enough power to do any DYI from furniture refinishing to a Remodel, but without needing to be a bulky dude to handle it, as the hand grip is not too big, that it makes using by us DYI gals impossible. It gave a good even sanding and hooked with with the optional coupler to my nifty shop vac. Plus the price point was a value. Newbie DYI gals hook and loop type sander is velcro. JSK :-) now go forth and chalk paint but prime before you upcycle.
Date de publication: 2017-05-11
Rated 5 de 5 de par Light, quiet, powerful, well built I finally had to retire my old Porter Cable sander after 20 years. I always thought it was a bit underpowered. Now I know for sure it was. Man, the time I could have saved over the last 20 years with this baby! Seems solid, time will tell. I like the bag carrier. The built in dust collection is OK, but I downgraded the design by 1 star because I am not too crazy about the dust collection port connectability. I had to rig a connection to my vacuum cleaner with Gorilla tape. Lowes does not sell to sell the adapter. Sandpaper lasts ten times as long with a vacuum connected.
Date de publication: 2015-08-16
Rated 5 de 5 de par Dewalt ROS Sander - I don't know why I waited I finally upgraded and purchased a new Dewalt ROS Sander. Some of the decision was thrust upon me when I decided to tackle a sizable boat renovation project and hand sanding wasn't cutting it and my old sander went the way of the Dodo. Anyway, the performance of this sander was excellent with highlight notes for the dust collector, speed control, comfort, and ease of changing the sanding pads. After several hours of working on the boat, in between farming projects, I was impressed by the amount of sanding I was cover and the boat renovation is good for it. I feel like a dope for waiting so long to get one.
Date de publication: 2017-07-29
Rated 5 de 5 de par Great Machine! I have had one of these machines before and it has been one of the best power tools I have ever owned. I gave it to my daughter and needed another, which prompted this purchase. The only thing I don't care for about this unit is the way it hooks up to the vacuum. The old one took the nozzle in a tight fit that made it a "hands off" situation to hook up the vacuum. This one does not fit quite so well and I will have to look for an adapter to facilitate operation with the vacuum. Otherwise, this is just like my old one and a joy to use. I like the soft case too.
Date de publication: 2015-08-12
Rated 5 de 5 de par Replaced My Old Sander My old sander was about 25 years old. I do a little wood working. Some refinishing. Odds & Ends. But the switch was going out & I was stripping & refinishing all the doors in my house. So I bought a new sander. It is so much quieter than my old sander. And the dust is contained with the bag. Less mess to clean up. Works well. It doesn't pull in my hands. Doesn't gouge the wood when I turn it on. Biggest plus my old sander used adhesive sand paper so I got to replace the pad on the bottom every few years. The new one uses Velcro so I hope that means the sander pad will last longer.
Date de publication: 2016-04-13
Rated 5 de 5 de par Great Sander! My wife and I are building a house and have a large room with knotty pine ceiling and Douglas Fur beams to sand and finish. I started with one and was so happy with it, I went back and got another for the wife. The 1st was the variable speed model that I always run on "High", so the 2nd one I saved $20 bucks and it works just as well and I think it weighs less. (I often would grab her's when she went for her 1 1/2hr "short" tea drinking break:-)) These are great sanders, well worth the money. Unless you sand 8 hours a day 265 a year and you don't leave it out in the rain or drive over it with your truck, this tool will last for many typical use wood workers years. Note: I started taking the time to post reviews due to how much they have helped me make good purchasing decisions. If you read this and make a purchase, please write a review (good or bad) so that others like us can benefit. Happy sanding.
Date de publication: 2015-11-16
  • y_2020, m_1, d_15, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_262
  • loc_fr_CA, sid_00276219, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT