Rabais hebdomadaires
Voir tous les produits
CRAFTSMAN
Description
Cette ponceuse à ruban 7 A de Craftsman est dotée d'une courroie angulaire de 3" x 21", permettant un sablage de précision en vitesse grâce à sa vitesse maximale de 800 pieds/minute. De plus, le système de changement de ruban sans outil permet de remplacer celui-ci rapidement, et ce même sur le chantier, alors que la poignée surmoulée à 3 positions offre un confort amélioré lors de l'usage. Enfin, le système de dépoussiérage intégré avec sac à poussière assure une meilleure propreté, minimisant également le nettoyage nécessaire après le sablage. Ce produit est couvert par une garantie limitée de 3 ans.
Caractéristiques
Source d'alimentation
Électrique
Voltage
120 V
Vitesse
800 pi/min (244 m/min)
Type
Ponceuse à ruban
Style
Avec fil
Ampérage
7 A
Couleur
Rouge et noir
Garantie
Garantie limitée de 3 ans
Inclus
Sac à poussière, courroie de ponçage
Largeur
3" (7,62 cm)
Longueur
21" (53,34 cm)
Produits fréquemment achetés ensemble
YELLOW JACKET
Lisière à 6 prises, protection contre surtensions, 6', jaune
Format 1.8M
N° d'article 32045053
DEGIL SAFETY
Lunettes protectrices ultralégères, claires, paquet de 12
Format PK12
N° d'article 86575178
SHOPSMITH
Courroie de ponçage, 3 po, 21 po, grain 36
Format 3x21"x36GN
N° d'article 77375612
SHOPSMITH
Courroie de ponçage, 3 po x 21 po, grain 60
Format 3x21"x60GN
N° d'article 77375616
SHOPSMITH
Courroie de ponçage, 3 po x 21 po, grain 80
Format 3x21"x80GN
N° d'article 77375619
Vous pourriez aussi aimer
CRAFTSMAN
Ponceuse de finition, 1/4 de feuille, 2 A, 13 500 orb./min
Format 2AM
N° d'article 00276573
CRAFTSMAN
Ponceuse orbitale aléatoire de 5", 3 A, 12 000 orb./min
Format 5"x3AM
N° d'article 00276574
SKIL
Ponceuse de finition, action orbitale, 5 po, 2,8 AM
Format 5"x2.8AM
N° d'article 32165007
CRAFTSMAN
Ponceuse orbitale aléatoire V20, sans fil, 12 000 orb./min
Format 5"x20V
N° d'article 00276547
BOSCH
Outil de ponçage/polissage à mouvement aléatoire, 2,5 A, 5''
Format 5"x2.5AM
N° d'article 19835934
DEWALT
Ponceuse orbitale à vitesse variable Dewalt, 5", 3A
Format 5"x3AM
N° d'article 00276219
BOSCH
Ponceuse orbitale de finition électrique à feuille 1/4, 2 A
Format 2AM
N° d'article 19836161
DEWALT
Ensemble de ponceuse sans fil DeWalt Power Detect 20V MAX avec moteur sans balai, batterie et chargeur, 4,5 po
Format 4 1/2"x20V
N° d'article 00277275
MAKITA
Ponceuse à courroie électrique, 5,6 A, 3" x 18"
Format 3x18"x5.6A
N° d'article 1197185
where is it made?
Made in China
Date de publication: 2020-09-01
Can I connect to a vacuum cleaner? For me this is super important.
Ponceuse à ruban avec fil, 21" x 3", 7 A, 800 pi/min est évalué
de
5 de
130.
Rated 3 de
5
de
Anna par
Not great and not bad.
[This review was collected as part of a promotion.] If you have a few small sanding jobs around the house, this unit might do just fine. However, for any real work, I would suggest going with something that has a metal body and is built a bit more reliably. The plastic guide for the belt got so hot while sanding a piece of the coarse of maybe an hour, that it melted and sheered right off. I was still able to use the unit, but I know constantly have to play with the belt adjustment to keep the belt on track.
The dust collection sack does work pretty well, compared to other home gamer products I have used in the past and it does feel pretty solid in your hands. Just does not seem to be built for any semi-pro use.
Date de publication: 2019-03-22
Rated 4 de
5
de
John par
Decent sander
[This review was collected as part of a promotion.] Got this for the price to redo my oak stair treads. Comes with 60 grit belt. but I used 80 grit. Works fine and you will need to watch the adjustment for the belt alignment to keep it aligned part of the time. I did like the front flip guard to keep you off the wall if needed. You can flip it up when needed as well. The handle also adjusts. Clamp lever is a little hard. I noticed the trig lock didnt spring back to normal after a few times. But it still works. Overall it worked good for the money. I used an oscillating tool to get the corners and edges.
Date de publication: 2020-03-27
Rated 5 de
5
de
OtherHoneyMatt par
Price Plus Power!
[This review was collected as part of a promotion.] Noth comes close to this craftsman belt sander. Put a low grit on and be careful because blink and you could lose your project. The good thing is it light so you can really control it without feeling like your fighting gravety too. I'd by it again 3vtines and still spend less then the next in price line. Of and the way the front belt opens up means you can look at what your sanding... like it should be with no Touch for a second, Look, Repeat. Well done craftsman!
Date de publication: 2019-03-17
Rated 3 de
5
de
Weekend-diy-guy par
Light duty sander
[This review was collected as part of a promotion.] This sander handled fine and did a good job. I would recommend this for only light duty work though. The housing is all plastic and there is a lot of heat generated if this runs for any length of time and the plastic will melt. In fact it melted in several places including the belt drive which got so hot it melted to the housing and quit working all together. By the way I only used it for a week. My guess this sander would work best for only 10 to 15 minutes at a time and then let cool down. Unfortunately, my project proved too big for this tool and I probably should have spent more money on a heavier duty one. Overall, it works good and will do fine for the small project occasional sanding. However, if you have a large project such a sanding a deck or floor, you probably should go with a different sander.
Date de publication: 2019-05-21
Rated 5 de
5
de
Sam par
Quality product
[This review was collected as part of a promotion.] I purchased this piece of equipment, took it home, opened the box and comes with an 80 grit belt already on it. I used mine to sand down a cypress slab for a desk and it worked very well.
If I only wish one thing for an improvement, it would be a little higher rpm. The power is sufficient and I am overall very satisfied with this belt sander.
Date de publication: 2019-02-17
Rated 4 de
5
de
Cody par
[This review was collected as part of a promotion.] Just purchased this on black friday. It's a great sander, shame it's mostly plastic. But for the price I wouldn't expect it to be metal. Do have to keep adjusted the belt so it won't rub. Not a huge problem. I would buy it again though.
Date de publication: 2018-12-07
Rated 5 de
5
de
Jennifer par
Belt sander
[This review was collected as part of a promotion.] This is our second belt sander and I absolutely love it ! Our first one was a belt sander by black and decker and didn’t last well at all and this brand is absolutely amazing and have had no issues with it ! Attached is a beautiful table I did for us using the belt sander
Date de publication: 2019-05-09
Rated 3 de
5
de
Ev par
Disappointed
[This review was collected as part of a promotion.] Design and ease of use are fine, but it's only been in use a couple of weeks and it's occasionally making sounds like the bearings or brushes are about to go out. Speed is inconsistent as well. So far, it's done the job well enough, but I'm worried about how long it's going to last. I had expected this to be a step up from my old Black and Decker. It isn't.
Date de publication: 2019-02-10
LIENS PRATIQUES
Services aux consommateurs
À propos de RONA
