• icon-wishlist
  • icon-cart

Pompe à jet de puits de surface, 3/4 CV

Article #13335007 Modèle #506547SS Format 3/4CV
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Pompe à jet de puits de surface, 3/4 CV

icon-wishlist

Description

Cette pompe à jet de puits de surface fonctionne automatiquement grâce à un interrupteur à pression. Elle est dotée d'un impulseur à haute performance et un injecteur intégré en noryl. La pompe aspire jusqu'à 3400 LPH, jusqu'à 65 lb/po² et offre une aspiration verticale maximale de 25'. Le moteur de la pompe est muni d'un sélecteur de tension 115/230 V et il est refroidi par un ventilateur. L'arbre du rotor et le sceau mécanique sont faits d'acier inoxydable. Le boîtier de moteur est également fait d'acier inoxydable pour éliminer la corrosion. Ce produit est couvert par une garantie de 2 ans à compter de la date d'achat.

Caractéristiques

Type
Pompe à jet de puits de surface,
Modèle
506547SS
Composante
Acier inoxydable
Couleur
Inox noir
Puissance du moteur
3/4 CV
Voltage
115/230 V
Capacité
3400 LPH
Garantie
Garantie de 2 ans à compter de la date d'achat

Vous pourriez aussi aimer

Pompe à eau Onsen 3.0, 12 V icon-wishlist
ONSEN
Pompe à eau Onsen 3.0, 12 V
 
Détails
Article #330676412
Pompe à jet de puits de surface de 3/4 HP non submersible icon-wishlist
RED LION
Pompe à jet de puits de surface de 3/4 HP non submersible
Format 3/4CV
Détails
Article #9215025
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Pompe à jet de puits de surface, 3/4 CV est évalué 3.7 de 5 de 9.
Rated 5 de 5 de par Excellent Pump-Easy Installation-Great Performance Great pump from BURCAM and great price from LOWES. This pump purchased to replace a 20 year old Sears Craftsman jet pump and tank system. Pump is used at a seasonal lakeside camp in Maine where the pump is drained at the end of each season and left to 'winter over' in the unheated pump shed. Water source is the lake with a 75 foot horizontal 1 inch diameter suction tube and a 10 foot vertical rise from the foot valve to the pump inlet. I'm taking the water from the outlet on the front of the tank and pushing it up about 10 feet to the highest point at the top of the shower head. Installation was simple, swapping out my electrical and water inlet and outlet fittings from the old pump to the new pump. I have PVC unions on both the inlet and outlet water lines and the electrical is 120V flexible 14 gauge plugin. I found it easier to remove the old pump and set it up on the work bench next to the new pump. There I could swap out the electrical and the water inlet and outlet fittings in a comfortable environment. I also checked/set the tank air pressure at 28 psi since the pump's pressure switch is set at 30psi/50psi. The completed pump could then be set in place, unions connected, suction tube and pump primed and power cord plugged in. The pump instantly picked up the prime with immediate water flow. The whole process took about 2 hours working at at a leisurely pace. I now have great water pressure and great water flow.
Date de publication: 2017-05-02
Rated 5 de 5 de par Great pump Did everything I thought it could do. No more wimpy showers, no more slow washer fill ups. [This review was collected as part of a promotion.]
Date de publication: 2018-09-27
Rated 2 de 5 de par Rapid Corrosion Problem Installed 2 years ago during a major remodel of home. Love the volume and pressure. However, after only those 2 years it suffered such a serious galvanic corrosion problem that it needed to be replaced.(See photos). The fact that the pump housing is stainless, the motor housing is carbon steel, and it is used in a water environment set the perfect condition for galvanic corrosion to take place. I spent 20 years working with pumps, and valves in a steam and water environment and this is the worst case of this type of corrosion I have ever seen. I contacted the company and they said it was because of the mineral content of my water. All water has mineral content so it will happen no matter where it is installed. The company did replace it but I had to send this one to them at my expense and it had to be received before they would send out replacement. All the while I would have been without water. So this required me to purchase another pump and all the additional hardware to install it. If you buy this, or have it already, remove the pump casing and coat the motor housing with lanocote or it will happen to you. One would think Burcam would have been aware of this problem beforehand. [This review was collected as part of a promotion.]
Date de publication: 2019-09-14
Rated 2 de 5 de par Leaks Ill start with the good. Install wasnt difficult, having to wire a plugin is annoying and it should come with one ready. The pump works as should. Getting 50psi, up from 30. The 2 stars. One of the factory seals leaks slow and steady. None of the good matters if it leaks. Attached a photo of the leak. You can see the water starting to build up for another drip. Dont write off small leaks. They make a big difference. [This review was collected as part of a promotion.]
Date de publication: 2019-10-18
Rated 4 de 5 de par pump Works well,ok pun intended, but noisy! Instructions were not too clear but company tech was awesome and cleared everything up quickly. [This review was collected as part of a promotion.]
Date de publication: 2019-04-23
Rated 5 de 5 de par Excellent quality This pump was very easy to install. I replaced another shallow well pump that the motor failed after 1 year. This pump has not lost it's prime like the old one did and has good pressure. I am very satisfied with this purchase. [This review was collected as part of a promotion.]
Date de publication: 2019-09-16
Rated 4 de 5 de par Shallow well pump Works great for cottage on lake ,piped to a 12 ft. well feeding a kitchen area and bathroom, plenty of pressure. [This review was collected as part of a promotion.]
Date de publication: 2019-05-01
Rated 2 de 5 de par Leaks First off, the pump works good, getting 50psi, up from 30, no problem. Went out and checked it day 2, the problem is one of the factory seals leaks. Its a slow, steady drip. It doesnt matter how good the pump works if the seals leak. Do not recommend based off this. Getting a replacement will also suck, will have to rewire and replumb it. [This review was collected as part of a promotion.]
Date de publication: 2019-10-18
  • y_2020, m_2, d_24, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_fr_CA, sid_13335007, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT