• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Perceuse VVR, 1/2 po, 7,8 A

Article #0027699 Modèle #DW235G Format 1/2"x7.8A
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

La perceuse Dewalt DW235G est munie de pièces en acier traité à chaud, lui conférant une durée de vie plus longue et une meilleure durabilité. Le boitier en métal assure une fiabilité accrue sur le chantier alors que la gâchette en caoutchouc pour deux doigts procure un meilleur confort. La poignée latérale se déplace sur 360° afin d'offrir un contrôle maximal et une versatilité optimale.

Caractéristiques

Type
Électrique/Portative
Composante
Métal et plastique
Ampérage
8,5 A
Tours par minute
0 à 850
Mandrin
1/2", à clé
Vitesse
Variable
Inclus
Poignée la térale 360°, clé pour mandrin
Garantie
Garantie limitée de 3 ans, contrat de service gratuit d'un an, garantie de remboursement de 90 jours
Source d'alimentation
Électrique

Vous pourriez aussi aimer

Perceuse électrique VVR, 3/8", 5,5 A icon-wishlist
SKIL
Perceuse électrique VVR, 3/8", 5,5 A
Format 3/8"x5.5AM
Détails
Article #19835708
Marteau rotatif à trois fonctions icon-wishlist
SKT
Marteau rotatif à trois fonctions
Format 10AM
Détails
Article #59595099
Perceuse et mélangeur 8,5A icon-wishlist
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
Détails
Article #11975221
Perceuse à percussion - 7,0 A icon-wishlist
SKIL
Perceuse à percussion - 7,0 A
Format 1/2"x7.0AM
Détails
Article #19835719
Perceuse à percussion à vitesse variable, 7 A, 1/2'' icon-wishlist
BOSCH
Perceuse à percussion à vitesse variable, 7 A, 1/2''
Format 1/2"x7A
Détails
Article #1983278
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min icon-wishlist
CRAFTSMAN
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min
Format 3/8"
Détails
Article #00276555
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir icon-wishlist
CRAFTSMAN
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir
Format 1/2"x7AM
Détails
Article #00276552
Trio perceuse, mélangeur et récipient icon-wishlist
MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x6.5AM
Détails
Article #11975278
Marteau perforateur Xtreme(TM) SDS-plus®, 1" icon-wishlist
BOSCH
Marteau perforateur Xtreme(TM) SDS-plus®, 1"
Format 1"x8.00AM
Détails
Article #19836183
Ensemble de visseuse à auto-alimentation icon-wishlist
QUIK DRIVE
Ensemble de visseuse à auto-alimentation
Format 1"-3"
Détails
Article #39195024
Ensemble de perceuse à percussion, 1/2" icon-wishlist
MAKITA
Ensemble de perceuse à percussion, 1/2"
Format 1/2"x6AM
Détails
Article #11975408
Perçeuse électrique VVR, 3/8 po, 7 A icon-wishlist
DEWALT
Perçeuse électrique VVR, 3/8 po, 7 A
Format 3/8"x8AMx2500TR
Détails
Article #0027636
Perceuse-mélangeur avec fil, 5/8", 9,0 A icon-wishlist
BOSCH
Perceuse-mélangeur avec fil, 5/8", 9,0 A
Format 5/8"x9.0AM
Détails
Article #19836315
Visseuse à gypse 6,5 A icon-wishlist
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
Détails
Article #11975212
Perceuse à percussion VVR, 1/2 po, 7,8 A icon-wishlist
DEWALT
Perceuse à percussion VVR, 1/2 po, 7,8 A
Format 1/2"x7.8A
Détails
Article #0027199
Marteau perforateur Xtreme Max Bulldog(TM) SDS-plus®, 1 1/8" icon-wishlist
BOSCH BULLDOG XTREME
Marteau perforateur Xtreme Max Bulldog(TM) SDS-plus®, 1 1/8"
Format 1 1/8"x8.5AM
Détails
Article #19836167
Tournevis électrique VVR pour gypse 6,0 A icon-wishlist
DEWALT
Tournevis électrique VVR pour gypse 6,0 A
Format 6.0Ax115V
Détails
Article #0834164
Visseuse électrique, 0-4000 tr/min. icon-wishlist
SENCO
Visseuse électrique, 0-4000 tr/min.
Format 6.4AM
Détails
Article #10595009
Ensemble perceuse à percussion Dewalt, lithium-ion, 1/2", 20 V icon-wishlist
DEWALT
Ensemble perceuse à percussion Dewalt, lithium-ion, 1/2", 20 V
Format 1/2"x20V
Détails
Article #00277187
Perceuse à percussion, 1/2 po, 10 A icon-wishlist
DEWALT
Perceuse à percussion, 1/2 po, 10 A
Format 1/2"x10A
Détails
Article #00275406
Visseuse électrique, 0-5000 tr/min. icon-wishlist
SENCO
Visseuse électrique, 0-5000 tr/min.
 
Détails
Article #10595010
Perceuse à percussion à 2 vitesses, 1/2", 8,5 A icon-wishlist
BOSCH
Perceuse à percussion à 2 vitesses, 1/2", 8,5 A
Format 1/2"x8.5AM
Détails
Article #19835875
Clé à chocs avec enclume à cheville d'arrêt, 1/2 po, 7,5 A icon-wishlist
DEWALT
Clé à chocs avec enclume à cheville d'arrêt, 1/2 po, 7,5 A
Format 1/2"x7.5A
Détails
Article #0027227
Visseuse à gypse à auto alimentation icon-wishlist
QUIK DRIVE
Visseuse à gypse à auto alimentation
Format 1@3"
Détails
Article #3919020
Clé à chocs avec cordon, 1/2", 7,5 A, 2700 IPM, 7 douilles icon-wishlist
CRAFTSMAN
Clé à chocs avec cordon, 1/2", 7,5 A, 2700 IPM, 7 douilles
Format 1/2"x7.5AM
Détails
Article #00276810

how long is the cord?

Posée par: PollyB
  • y_2020, m_4, d_3, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_fr_CA, sid_0027699, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Perceuse VVR, 1/2 po, 7,8 A est évalué 4.2 de 5 de 33.
Rated 5 de 5 de par Awesome drill for the money. I purchased this drill back in April and have used it extensively over the last eight months. I have used it to drill countless 5/32" holes in concrete basement walls to attach furring strips using tapcons. I have used it to drill approximately 100 3/8" holes threw my 3 1/2" thick basement floor for a sump Pitt basically made Swiss cheese out of It, took longer to do it this way but was able to control the concrete dust and keep the mess to minimum. Yesterday I used it with a 4 1/4" spyder hole saw to drill through Sill plate and brick for a new dryer vent. Very happy with this drill so far highly recommend it! [This review was collected as part of a promotion.]
Date de publication: 2018-11-03
Rated 1 de 5 de par lack of power I own several DeWalt Products and I'm a Big fan how ever I'm disappointed in this drill. I purchased on 7/12/16 to use a 3/4" auger bit to drill out holes in 2x4 studs for my wiring and would not hardly drill out my holes because of lack of POWER and overheating it took me 45min. to drill out 8 holes in my top plate to run my wires and by then it was smoking out of the vents. Needless to say I returned the product and finished the job drilling out my other studs with my DeWalt 18v 1/2" drive cordless that still uses the 18V XRP Batteries.
Date de publication: 2016-07-21
Rated 3 de 5 de par Missing Critical Design Requirement For the most part this drill is Excellent. However it has one extremely major flaw. The side handle is worthless and has almost zero assistance in handling the torque from the well made motor. In my opinion this is why the handle is needed. The handle does have "teeth" to allow it to firmly engage the device it is attached to. The drill however just has a polished sleeve that the handle easily slides around even when firmly tightened. You are buying a 1/2 inch drill because you have large bits.
Date de publication: 2014-05-15
Rated 4 de 5 de par All around good hand drill After trying two other brands of similar drills that proved to have flaws such as chuck would not tighten sufficiently, and excessive runout (wobble) in the chuck, my third try was this drill. I'm happy to say this one does not suffer from the mentioned defects. This drill is a step up in weight and power from the normal DIY'er drill. It has no problem at all drilling steel when using up to 1/2" drill bits. In fact the torque can truly be "wrist-breaking" when the bit finally goes through the steel plate, so be sure to have a very firm grip with both hands at that time. As someone mentioned, the handle grips the body of the drill by tightening around a smooth surface. I can see how this might slip if not tight enough, but I didn't have any problem with that during the test run I made today. It would be a good idea to check it for tightness from time to time during use, just to be sure. The chuck is not designed to hold bits smaller than about 1/8" but for anything that small or smaller this drill is overkill anyway. This drill is obviously made for somewhat higher torque applications such as drilling metal, using hole saws, or boring into wood with spade or auger bits; all which require lower speed and higher torque than the higher speed of the standard 3/8" drill. The trigger offers very good speed control from the lowest to highest speed and is easy to maintain the speed at any RPM available. Some people don't like the reverse switch location, but I didn't find it to be a problem. I was a little skeptical about buying a dewalt drill since I have read a lot lately about the brand not producing the quality and durability that it has been known for in the past. However, I don't see anything that indicates that about this drill. Time will tell how durable it is, but for now this appears to be an excellent drill for the money. If you are looking for a drill that will handle most medium-duty work, I think this one is a good choice.
Date de publication: 2014-07-30
Rated 5 de 5 de par Better idea for drill I've used battery drills for years, but to replace the battery costs more than I paid for the drill in the beginning so that's why I went with the corded drill. My dad was a contractor in New Mexico and he was a user of only DeWalt. I've learned to appreciate them more and more!
Date de publication: 2013-07-27
Rated 5 de 5 de par Needed a strong drill. Was driving 10 inch timber bolts and my other drill was weak sauce. Got the Dewalt and made a hard job easy. Wish i bought it at the beginning of the job. Feels so strong i think will last me a very long time. If you need a 1/2 inch drill get this one!
Date de publication: 2015-08-31
Rated 5 de 5 de par The perfect drill Awesome drill flew through double treated 6x6 TM bees with a ships auger like cutting through butter. I have many cordless drills but this corded drill passes all of those with its power.
Date de publication: 2017-06-20
Rated 1 de 5 de par Chuck broke off with light use I bought this drill a year ago and used it lightly to drill holes in wooden beams for wiring. I went to use it and the chuck head broke off. The main metal connection to the chuck.
Date de publication: 2018-05-29
  • y_2020, m_4, d_3, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_fr_CA, sid_0027699, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT