• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Perceuse à percussion VVR, 1/2 po, 7,8 A

Article #0027199 Modèle #DW511 Format 1/2"x7.8A
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Perceuse à percussion VVR, 1/2 po, 7,8 A

icon-wishlist

Description

La perceuse à percussion Dewalt DW511 est équipée d'un moteur de 7,8 ampères afin d'offrir une bonne performance en plus d'une protection contre les surcharges. Elle se caractérise par son double usage : à la fois perceuse à percussion et perceuse, son utilisation est polyvalente, allant du bois à l'acier et la maçonnerie. Sa conception légère augmente sa durée d'utilisation en réduisant votre fatigue. La gâchette à deux doigts assure plus de confort, alors que la poignée latérale à 360° offre contrôle, polyvalence et précision. La vitesse variable de cette perceuse permet de percer des trous de façon précise. Garantie limitée de trois ans.

Caractéristiques

Mandrin
1/2 po
Composante
Métal/plastique
Ampérage
7,8 A
Battements par minute
0-46 000 coups/min
Tours par minute
0-2700 tr/min
Vitesse
Variable
Inclus
Poignée latérale 360°, tige de précision, clé pour mandrin
Source d'alimentation
Électrique

Vous pourriez aussi aimer

Perceuse à percussion, 1/2 po, 10 A icon-wishlist
DEWALT
Perceuse à percussion, 1/2 po, 10 A
Format 1/2"x10A
Détails
Article #00275406
Ensemble de visseuse à auto-alimentation icon-wishlist
QUIK DRIVE
Ensemble de visseuse à auto-alimentation
Format 1"-3"
Détails
Article #39195024
Marteau perforateur SDS-max®, 1 3/4" icon-wishlist
BOSCH
Marteau perforateur SDS-max®, 1 3/4"
 
Détails
Article #330609801
Perceuse à percussion à vitesse variable, 7 A, 1/2'' icon-wishlist
BOSCH
Perceuse à percussion à vitesse variable, 7 A, 1/2''
Format 1/2"x7A
Détails
Article #1983278
Marteau perforateur SDS-plus®, 1 1/8" icon-wishlist
BOSCH
Marteau perforateur SDS-plus®, 1 1/8"
 
Détails
Article #330609798
Perceuse à percussion à deux vitesses Bosch icon-wishlist
BOSCH
Perceuse à percussion à deux vitesses Bosch
 
Détails
Article #330609808
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir icon-wishlist
CRAFTSMAN
Perceuse à percussion, 1 vitesse, 7 A, 3100 tr/min, rouge/noir
Format 1/2"
Détails
Article #00276552
Marteau perforateur Xtreme(TM) SDS-plus®, 1" icon-wishlist
BOSCH
Marteau perforateur Xtreme(TM) SDS-plus®, 1"
Format 1"x8.00AM
Détails
Article #19836183
Trio perceuse, mélangeur et récipient icon-wishlist
MAKITA
Trio perceuse, mélangeur et récipient
Format 1/2"x6.5AM
Détails
Article #11975278
Perceuse électrique VVR, 3/8", 5,5 A icon-wishlist
SKIL
Perceuse électrique VVR, 3/8", 5,5 A
Format 3/8"x5.5AM
Détails
Article #19835708
Marteau perforateur SDS-Plus, 1,25" icon-wishlist
BOSCH
Marteau perforateur SDS-Plus, 1,25"
 
Détails
Article #330609799
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min icon-wishlist
CRAFTSMAN
Perceuse-visseuse avec cordon, 7 A, 3/8", 2500 tr/min
Format 3/8"
Détails
Article #00276555
Marteau perforateur SDS-max®, 1 7/8" icon-wishlist
BOSCH
Marteau perforateur SDS-max®, 1 7/8"
 
Détails
Article #330609796
Clé à chocs avec cordon, 1/2", 7,5 A, 2700 IPM, 7 douilles icon-wishlist
CRAFTSMAN
Clé à chocs avec cordon, 1/2", 7,5 A, 2700 IPM, 7 douilles
Format 1/2"x7.5AM
Détails
Article #00276810
Perceuse et mélangeur 8,5A icon-wishlist
MAKITA
Perceuse et mélangeur 8,5A
Format 1/2"x8.5AM
Détails
Article #11975221
Visseuse à gypse 6,5 A icon-wishlist
MAKITA
Visseuse à gypse 6,5 A
Format 1/4"x6.5AM
Détails
Article #11975212
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Perceuse à percussion VVR, 1/2 po, 7,8 A est évalué 4.0 de 5 de 91.
Rated 4 de 5 de par Good Basic Hammer Drill Overall, I am happy with my purchase, and I think this is a pretty good drill, espeially for the price. I have only used it twice, and it got both jobs done. However, it did seem to struggle with one of the jobs I was using it for, and it was getting pretty hot by the time I was finished. If you are going to demand a lot out of a drill, or use it for some heavy duty jobs, you should probably go with a more powerful model. If you are just going to use it for an occassional project or light to medium duty use, this drill should work fine.
Date de publication: 2014-07-13
Rated 5 de 5 de par Great product for DIY and more I recently bought this from Lowes and I am amazed how much power it is packed with. I have used 12V battery powered drill before, and this one would blow the 12V one out of water. It can drill a hole in cinder blocks within seconds. Somewhere around 10 seconds to be exact. One drawback is that it didn't came with a carrying case. And dewalt apparently doesn't sell just the carrying case though. Other than that I cant complain about this drill. Great for DIY projects and great value for the money.
Date de publication: 2014-05-22
Rated 4 de 5 de par Problem with depth rod Bought this hammer drill to install 4.5 inch long 1/4" Tapcon bolts in a cinder block wall. It drilled the holes nicely and quickly. I was also able to drive the Tapcon Bolts into the wall with ease using the drill. But, I needed to use the included depth gauge rod. It only will work with the removable handle set at two locations, both parallel to the drill handle (below or above the drill). When the handle is set to 90 degrees from the main handle, the depth gauge rod hits the motor housing. I find having the handle parallel to the main handle makes drilling more difficult. I found the keyed chuck awkward to use. Wish it had a keyless chuck. Didn't think about this when I bought the drill.
Date de publication: 2013-06-01
Rated 3 de 5 de par This one is going back to the store. I needed to put some concrete anchors in the basement wall, so I got this drill in local Lowes. With a right bit, it goes through concrete well (got seven holes out of eight, number 8 must've hit a hard rock - it just won't budge). The noise level was low, and there wasn't much dust. After drilling holes, I started installing the anchors. The plastic bit went in easily, so I used the drill as a screw-driver to screw the metal screws into the plastic. Nope, this drill won't work as a screw driver. No power at all at low RPM. I use my drills a lot on low RPMs, so I can't have this. Also, the controls are made out of thin plastic. I don't think they will last very long.
Date de publication: 2012-01-10
Rated 5 de 5 de par Go To Drill This is the first 1/2" Drill I have owned and it is now my "go too" drill. Plenty of power but with the variable speed control it allows me to handle any job. The chuck is easy to use and grips the bits like no other I have owned, especially key less chucks. After doing my research I chose the Dewalt Corded Drill. Pricing at Lowe's was comparable with other stores, even on line. What helped me make my decision was Lowe's has always honored the Troops and Veterans. Even though they are further away, on most purchases I will drive the extra distance. [This review was collected as part of a promotion.]
Date de publication: 2018-10-21
Rated 5 de 5 de par DONT LET THIS SIZE AND AMPS FOOL YOU. I PURCHASED THIS ONLY BECAUSE IVE USED DEW ALT FOREVER, I NEEDED IT TO ATTACH FOOTINGS TO MY CEMENT FOUNDATION ALONG SIDE OF THE HOUSE, AT FIRST I WASN'T SURE BECAUSE OF THIS SIZE, I DID LOOK AT MILWAUKEE UNTIL I FOUND OUT IT WAS NOW CHINA. BEING THEY WERE THE KIND OF RUGGED BACK IN THE DAY. I CHOOSE THIS ONE BECAUSE OF ITS RATINGS, AS LONG AS YOU HAVE GOOD SHOULDERS AND GOOD STRONG FIRM HANDS THIS WORKS PERFECT. I DROVE 3/4" LAG HOLES LONG WITH THE BOLTS IN NO TIME, 12 TO BE EXACT. THEN THE OTHER DAY I NEEDED THIS FOR USING SELF TAPPING 4" SCREWS FOR MY NEW STEEL GARAGE, DROVE ANOTHER 40 WITH EASE, IT IS EXTREMELY POWERFUL, AND I LIFE WEIGHTS, THE TORQUE OF THIS TAKE YOU WITH IT, WORKS WITH A CAUSE, VERY HAPPY AND THE MOST HANDIEST EVER, definetly not a wimpy tool. A VERY GOOD BUY WELL WORTH IT, !!!!!!!!!!!!!!!
Date de publication: 2017-08-09
Rated 1 de 5 de par Poor quality for Dewalt I have many Dewalt tools, but this one doesn't make the cut. I purchased this and it ended up burning up within the first 30 min. I returned it and got a new one. Used it about 6-10 time over the last year. It gets very hot if you use it for more then 5 min. Then two of the 4 bolts the hold the housing together broke. After calling Dewalt, they said I could take it to their service center one hour away, but I would probably be charged since it was about a year since I purchased it. This product definitely has some design issues.
Date de publication: 2016-11-13
Rated 5 de 5 de par Great hammer drill Bought this drill to drill holes in basement foundation and mount boards. Worked great- drilled through easily without any problems and easily screwed concrete anchors into wall. Would highly recommend this drill.
Date de publication: 2011-11-12
  • y_2020, m_1, d_28, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_91
  • loc_fr_CA, sid_0027199, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT