• icon-wishlist
  • icon-cart
Voir tous les produits ZINSSER

Peinture imperméabilisante/anti-moisissure, Zinsser, huile, 3,7 l, blanc

N° d'article 03305746 N° de modèle Z05011 Format 3.7L
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Peinture pour sous-sols et maçonnerie. Anti-moisissure. Imperméabilité garantie à vie. Résiste à une pression jusqu'à 34 PSI. Fini lisse, non granuleux, facile à appliquer sur des murs secs ou humides. Formule à base d'huile à faible odeur. Blanc. 3.7 L

Caractéristiques

Utilisations
Sous-sols et maçonnerie
Format
3,7 l

Vous pourriez aussi aimer

Apprêt-scelleur Go Prime(MD) Sico(MD), 946 ml, blanc icon-wishlist
SICO
Apprêt-scelleur Go Prime(MD) Sico(MD), 946 ml, blanc
Format 946ML
Détails
N° d'article 50316649
Apprêt-scelleur Sico GoPrime, latex alkyde, 3,78 l, blanc icon-wishlist
SICO
Apprêt-scelleur Sico GoPrime, latex alkyde, 3,78 l, blanc
Format 3.78LT
Détails
N° d'article 50316648
Apprêt d'impression antitache Cover Stain(MD), 3,78 l, blanc icon-wishlist
ZINSSER
Apprêt d'impression antitache Cover Stain(MD), 3,78 l, blanc
Format 3.78LT
Détails
N° d'article 03305624
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 946 ml, blanc icon-wishlist
ZINSSER
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 946 ml, blanc
Format 946ML
Détails
N° d'article 03305743
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 3,78 l, blanc icon-wishlist
ZINSSER
Apprêt bloque-taches Zinsser, B-I-N 2(MD), 3,78 l, blanc
Format 3.78L
Détails
N° d'article 03305742
Apprêt d'impression antitache Cover Stain(MD), 946 ml, blanc icon-wishlist
ZINSSER
Apprêt d'impression antitache Cover Stain(MD), 946 ml, blanc
Format 946ML
Détails
N° d'article 03305623
Apprêt-scellant intérieur Kilz Original, alkyde, 18,93 l, blanc icon-wishlist
KILZ
Apprêt-scellant intérieur Kilz Original, alkyde, 18,93 l, blanc
Format 18.93LT
Détails
N° d'article 08405324
Apprêt antitache, Zinsser, 18,9 L, blanc icon-wishlist
ZINSSER
Apprêt antitache, Zinsser, 18,9 L, blanc
Format 18.9LT
Détails
N° d'article 03305622
Peinture de signalisation Solignum, 3,78 l, blanc icon-wishlist
SOLIGNUM
Peinture de signalisation Solignum, 3,78 l, blanc
Format 3.78L
Détails
N° d'article 31035078
Peinture de signalisation Solignum, 3,78 l, jaune icon-wishlist
SOLIGNUM
Peinture de signalisation Solignum, 3,78 l, jaune
Format 3.78L
Détails
N° d'article 31035080

What are the application and prep instructions on a floor

Posée par: Beme
Hi Beme, Surfaces must be clean, dry, sound and free of dirt, greases, soap, and other contaminants. Salting or efflorescence, mould and mildew must be removed. Our WaterTite Waterproofing paint can be used over previously painted, non-glossy surfaces; however its waterproofing ability is then dependent upon the integrity of the previous coating. For best results, remove as much of the old coating as possible by manually scraping the surface, followed by thorough wire rushing. Exterior surfaces should be power washed or abrasive blasted to remove all loose and scaling paint and cement. All holes and cracks, especially active water leaks, must be patched with WaterTite Polyurethane Sealant or a similar product. Follow manufacturer’s directions for dry time, etc. Use in a well ventilated area. Extinguish all pilot lights and other sources of flames or ignition. Remove electrical equipment from the area. Stir or mix thoroughly before and during application. DO NOT THIN. Apply only when air, material, and surface temperatures are between 10-32ºC (50-90ºF) and the relative humidity is or less than 85%. Liberally apply the first coat using a thick polyester bristle brush, or by rolling a small section (91 cm x 91 cm (3x3 foot)) and then using a brush to work the coating into the pores of the masonry. Apply as much paint as necessary to produce a continuous, pinhole free film. Use a 25 mm (1”) nap roller cover for unpainted, porous surfaces or a 20 mm (¾”) nap roller cover for smooth or previously painted surfaces. The second coat can be brushed or rolled.
Répondue par: Rust-Oleum Answers
Date de publication: 2020-08-12

Would this work on a slate shower

Posée par: Donnyp
Hi Donnyp, Our WaterTite Waterproofing paint is for concrete and masonry surfaces only.
Répondue par: Rust-Oleum Answers
Date de publication: 2020-08-12

Does it work on tiled surface? I mean does it adhere to tile? Can I apply thinset mortar on top of it to install second layer of tile over it (on shower floor and wall)?

Posée par: pezz
Hi Pezz, Our WaterTite is for concrete and masonry surfaces only and we do not recommend it for tile.
Répondue par: Rust-Oleum Answers
Date de publication: 2020-08-12

after cureing does it give off any V.O.C's? Would it be safe to use around animals??

Posée par: Dave Kyle
Once cured, it doesn't give off any VOCs and is non toxic
Répondue par: Rust-Oleum Answers
Date de publication: 2020-08-07

Would this paint work on the inside of my 50 year old concrete laundry tub?

Posée par: debbie81
This paint is made for concrete only
Répondue par: Rust-Oleum Answers
Date de publication: 2020-08-07

I will be waterproofing a basement concrete wall and then glueing foam slab insulation to the concrete wall with PL300. How well does this Watertite product accept the PL300 adhesive? Will it peel off and result in loss of the foam slab insulation?

Posée par: JWMT
Hi JWMT, Thank you for your question. Either Watertite product should be fine with your adhesive. We recommend testing the paint on a stir stick first. Allow for full cure, which is 7-14 days, depending on temperature and humidity. Once cured, apply your PL300 adhesive to the stick and see if it dries and sticks. If your test is successfully then you should feel confident that the adhesive will stick to the painted concrete. We hope this answers your question. Feel free to contact us again if you require further information.
Répondue par: Rust-Oleum Answers
Date de publication: 2019-05-28

Can this product be used on a plywood subfloor material to add waterproof protection?

Posée par: DMK55
The Zinsser WaterTite is to be used on concrete only
Répondue par: Rust-Oleum Answers
Date de publication: 2019-04-30

Is this paint tintable to a dark colour?

Posée par: Fay23
This paint cannot be tinted to a dark color
Répondue par: Rust-Oleum Answers
Date de publication: 2019-03-12
  • y_2021, m_1, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_fr_CA, sid_03305746, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;