• icon-wishlist
  • icon-cart
Voir tous les produits HARDIEBACKER

Panneau de fibrociment «EZ-GRID»

Article #64196028 Modèle #220022 Format 1/4x36x60"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Panneau de fibrociment «EZ-GRID»

icon-wishlist

Description

Pour plancher et comptoir. Remplace le gypse. Meilleure résistance à la moisissure. 36 x 60 x 1/4 po.

Vous pourriez aussi aimer

ANTIDÉRAPANT FINEX icon-wishlist
FINEX
ANTIDÉRAPANT FINEX
Format 3.78LT
Détails
Article #64196472
Panneau Finex, fibro-ciment, 1/2'' x 4' x 8', naturel icon-wishlist
FINEX
Panneau Finex, fibro-ciment, 1/2'' x 4' x 8', naturel
Format 1/2"x4'x8'
Détails
Article #64196465
Panneau de ciment «Durock» icon-wishlist
Panneau de ciment «Durock»
Format 1/2"x32"x5'
Détails
Article #05285030
Panneau de béton léger « Permabase » icon-wishlist
CERTAINTEED
Panneau de béton léger « Permabase »
Format 1/2" 3'x5'
Détails
Article #64195915
COMPOSÉ DE FINITION POUR VIS icon-wishlist
FINEX
COMPOSÉ DE FINITION POUR VIS
Format 3KG
Détails
Article #64196467
Panneau Finex, fibro-ciment, 1/4'' x 4' x 4', naturel icon-wishlist
FINEX
Panneau Finex, fibro-ciment, 1/4'' x 4' x 4', naturel
Format 1/4"x4'x4'
Détails
Article #64196463
Panneau de béton léger « Permabase » icon-wishlist
Panneau de béton léger « Permabase »
Format 1/2x48x96"
Détails
Article #0993076
Fibrociment icon-wishlist
HARDIEBACKER
Fibrociment
Format 1/2x32x60"
Détails
Article #64196235
NETTOYEUR FIBROCIMENT icon-wishlist
FINEX
NETTOYEUR FIBROCIMENT
Format 4LT
Détails
Article #64196468
Fibrociment icon-wishlist
HARDIEBACKER
Fibrociment
Format 1/2x36x60"
Détails
Article #64196029
ANTIDÉRAPANT FINEX icon-wishlist
FINEX
ANTIDÉRAPANT FINEX
Format 3.78LT
Détails
Article #64196471
Panneau Finex, fibro-ciment, 1/4'' x 4' x 8', naturel icon-wishlist
FINEX
Panneau Finex, fibro-ciment, 1/4'' x 4' x 8', naturel
Format 1/4"x4'x8'
Détails
Article #64196464
Panneau de béton, 4' x 8' x 1/2" icon-wishlist
PERMABASE
Panneau de béton, 4' x 8' x 1/2"
Format 1/2" 4x8'
Détails
Article #60325011
Panneau de fibro ciment «HD 500» icon-wishlist
HARDIEBACKER
Panneau de fibro ciment «HD 500»
Format 1/2x48x96"
Détails
Article #64196434
Panneau de béton léger «Permabase» icon-wishlist
Panneau de béton léger «Permabase»
Format 1/2x32x60"
Détails
Article #0993075
Panneau en fibrociment, 1/4 po x 4 pi x 4 pi, lisse icon-wishlist
FINEX
Panneau en fibrociment, 1/4 po x 4 pi x 4 pi, lisse
Format 1/4"x4'x4'
Détails
Article #64195115

Can backer board be used to replace the brick panels inside a Regency gas fireplace?

Posée par: adon
Absolutely not!!
Répondue par: Notcrazy
Date de publication: 2019-08-28

Is this board flexible, can we install it on the arch?

Posée par: Roger12340
Definately not.  You would have to create bending cuts on one side much like regular drywall to do so.  Flexibility is between green board and concrete board
Répondue par: Kidkar
Date de publication: 2019-05-13

Can Hardie Board be used for a shower floor? (Affix with mortar?)

Posée par: Ronnie12345
Not sure go to its web site to fine out
Répondue par: Wayne o9
Date de publication: 2019-05-13

Can the 1/4" be used for Wall Tile when screwed into a wood framing (also screwed - very sturdy/strong) or must the 1/2" HD 500 be used?

Posée par: kataliyst
The 1/4 can be used into wooden framing. I used it for tile without problems.
Répondue par: SS ftw
Date de publication: 2019-07-27

Is Hardie Board a non combustible material?  If not, could you recommend an interior wall covering that is non combustible?

Posée par: Stretch79
Yes, HardieBacker® 1/4" Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4".
Répondue par: JJTT
Date de publication: 2018-10-18

Is hardiebacker a good choice for a shower and does it have to be waterproofed with something like redgard or other membrane?

Posée par: dana89
I wouldn't hesitate to use it for a shower but I would still tape the joints and apply Redgard as a precaution because it's a wet area.
Répondue par: ChuckSA
Date de publication: 2019-02-23

Can you use PL Premium to stick this product to metal studs?

Posée par: The Sweitz
Thank you for your question. Unfortunately using any kind of adhesive on it's own to secure Hardie Backer Board is not recommended. It must be fastened mechanically. Screws would be the recommended option.
Répondue par: CanWel - Brands Expert
Date de publication: 2019-02-23

can Hardie board be used to line a wood stove

Posée par: ir3333
  • y_2019, m_11, d_12, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_fr_CA, sid_64196028, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 2ms
  • QUESTIONS, PRODUCT
Panneau de fibrociment «EZ-GRID» est évalué 4.6 de 5 de 171.
Rated 5 de 5 de par wouldn't tile without it As with all projects, having the proper tools is a must. Not sure what tools everyone is using to drive the screws in and are having issues with them sitting flush, but I have zero problems. I use my Makita impact driver and it counter sinks the screws slightly for a snug fit. The mortar used in between the subfloor and the backerboard is really only used to fill the voids. This product will not level your floor. If you are worried about that, level the floor first. Make sure you seam the gaps with the backer board tape before tiling. There is a good instruction sheet on the hardieboard website on how to install this product.
Date de publication: 2012-01-13
Rated 5 de 5 de par Solid Subsurface for Tile I have used this product in four bathrooms for walls and floors. It is very tough stuff and you need to be prepared for the task of fastening it down. Once down it is an excellent subsurface for tile. I have had zero problems with my tile that has been laid down on top of it. Do use the screws that are designed for use with the backer board. They will countersink themselves if you do it right. I have used a jig saw with a tile cutting blade to cut straight lines as well as curves. Not a problem, just be sure to wear a breathing apparatus to keep the dust out of your lungs.
Date de publication: 2011-04-09
Rated 5 de 5 de par Great purchase I had thought about just putting tile down on the subfloor but I am glad I did not. This product made the floor seem more solid and stable. With the gridlines, it made it easy to measure and score. Had little to no problems screwing it down, if you put the screws where they were designed to go. You basically have to be on top of the screw to have it flush. Even at a slight angle, it will not be flush. But that could be a product of the screw and not the board. Did have an issue for cutting around registers and corners but did not have the proper tools I assume. Wear a mask if you are uncomfortable with any dust that might arise. Overall, I was very satisfied with this product and will use it again in the future.
Date de publication: 2011-05-12
Rated 5 de 5 de par Excellent Product!! I did some research first for cement boards. This one is PERFECT. It cuts without making a mess and is of high quality. I had the floors removed down to the subfloor. The guys screwed down really well the plywood with proper screws (I've bought a 5 lb box). Applied a QUALITY brand thin-set over the subfloor + leveled. Installed these cement boards. Screwed them down with proper screws (BACKER-ON 1 5/8" - qty 575/bucket). No more squeaking/movement. Applied a layer of thin-set over it and set the marble tiles. My DR, Kitchen and 1/2 have now a sturdy floor as none of the previous owners got to enjoy (for being cheap and cutting corners).
Date de publication: 2018-06-28
Rated 5 de 5 de par Perfect for everyone from DIY to Professional This is a great product for tile. With proper attention paid to the sub floor this will create a very solid floor. Some people have issues with cutting and screwing so hopefully this will help. Cutting- make sure you always keep a sharp edge on your knife and use a straight edge for accuracy. If you decide to use a saw wear a mask. This cuts a lot easier than other cement board on the market. Screwing- Use an impact driver, most screw heads get stripped because the screw was not level. Plus with a strong sub floor and a cement board it takes some good torque to get the screws to countersink. Using an impact driver takes all the effort and frustration away. I hope this helps for anyone looking to take on a tiling job themselves and remember, do your homework and prepare it will avoid many unnecessary headaches.
Date de publication: 2012-01-25
Rated 5 de 5 de par Easy to use, strong I've read several reviews saying this was hard to cut and it crumbled..But I did not have any problems with it. It was easily scored with a razor blade and cut just like sheet rock. Didn't have any problems at all with this stuff and it was easy to install. Thin set and hardie backer screws and this made my floor solid.
Date de publication: 2011-02-28
Rated 5 de 5 de par Beyond easy to use The last time I used this I did use a circular saw with a masonry blade. Cut through it just fine, but made a cloud of dust. This time I used the score and snap method after buying heavy duty utility knife blades. You do have to do a heavy score about 10 - 15 times to get it where it will fold, but it was worth it not having to deal with the dust. It was leaving a little bit of a edge on the cut side that was easily cleaned up by running the blade across it. I used Phillips cement board screws that I had left over from a previous job with a new drive bit in my old 19.2 v craftsman drill/driver on the high torque setting (low speed, more power). Every screw went in and countersunk just fine even when I couldn't put them in the designated spots. Cleanup was a breeze. I didn't even have a coating in the dustpan after doing about a dozen cuts. If you're going to use this board I recommend buying the heavy duty utility knife blades and use a decent driver to put the screws in with. I was also able to use a spade bit to cut holes in it for shower head pipe to come through and used a set of tile nippers to create the square opening for the shower controls. This is good stuff and if you follow the directions and think about what you're doing you should have no problems.
Date de publication: 2012-03-01
Rated 5 de 5 de par Solid product The 1/4" backer board is easy to work with and should be all you need so long as you have a solid subfloor to install in on. To make the installation as stable and reliable as possible follow the directions. Install it over a thin layer of thin set mortar, seal the seams with fiberglass mesh tape, screw it down (or nail it if you prefer) at the marks provided, and TILE AWAY!
Date de publication: 2013-08-02
  • y_2019, m_11, d_12, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_171
  • loc_fr_CA, sid_64196028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT