
Description
UTile par Maax(MC) offre l'apparence raffinée des tuiles, mais à une fraction du temps et de la complexité d'installation des tuiles de céramique standard. Comparativement aux douches blanches préfabriquées, Utile est plus durable et offre une variété de motifs élégants et de couleurs riches. Les murs UTile sont des panneaux muraux en une pièce et le système Ulok permet une installation facile et rapide, directement sur les montants muraux. Vous adorerez l'apparence authentique des lignes de joints, qui ne craquent pas et sans risque d'infiltration d'eau ou réparation. Une tablette de coin en verre est incluse. Facile à nettoyer. Fièrement fabriqué au Québec. Garantie 10 ans.
Caractéristiques
Couleur
Gris doux
Épaisseur
1 1/8" (2,90 cm)
Garantie
Garantie 10 ans
Hauteur
80" (203,20 cm)
Installation
Installation directement sur les montants de mur
Largeur
48" (121,92 cm)
Modèle
Metro
Type
Mur de douche
Commercial/Résidentiel
Résidentiel
Composante
Composite
Intérieur/Extérieur
Intérieur
Nombre de panneaux
1 panneau
Série
Classique
Produits fréquemment achetés ensemble
Vous pourriez aussi aimer
I have a bulk head above my shower area and the max height is 78 almost 79 inches yet these walls are 80 inch. They are perfect but don't fit. Can they be cut or do you have any suggestions on how I could make them fit?
Dear Karenzedd, thank you for contacting MAAX.
Unfortunately No. Utile wall panels can be pierced to add faucets and accessories, but they cannot be cut to change the dimensions of the wall panels or cut to fit around a window.
Unfortunately the Utile walls will not work for your application.
Best regards.
Date de publication: 2019-10-23
Can you install the utile in drywall?
Hello Ricky1988,
Thank you for your interest towards our Utile shower systems. Unfortunately, the Utile shower system must be installed directly to the studs and should not be installed on the drywall directly.
If you require any additional information regarding the installation, please contact us at 1-877-438-6229 OPT 2 OPT 2
Date de publication: 2018-06-22
do you make this for bathtub surrounds also?
Hello and thank you for inquiring about MAAX Utile products. Yes, we do make Utile walls for bathtubs. MAAX Utile tub wall kits are made to fit selected MAAX bathtubs.
Regards,
Date de publication: 2018-06-13
Can I connect two 48" panels together?
Hey Trish, I've only installed 60" back panels with 30" sides in one application and 32" sides in another application. The sides have a flange at the side allowing attachment to the back panel at one side and the wall studs at the outer edge. The back sections have a flange at the top, allowing it to be screwed to the studs. The side of the back sections have no flange, instead having pre-drilled holes for the hardware to be attached. This hardware, in turn attaches to hardware on the side pieces. So in short, I am 99% sure you can't attach two 48" panels.
Bryan
Date de publication: 2018-04-30
does the 60 inch back wall come with side walls or is this ordered separately
Hello Judy, Thank you for inquiring about MAAX Utile products. The back wall does not come with the side walls. Those would need to be ordered separately.
Regards
Date de publication: 2017-10-27
Is this product able to be cut to accommodate a 36" shower base?
Hello, thank you for inquiring about MAAX Utile products. These walls cannot be cut down due to the special Ulok locking mechanism that secures the panels together.
Regards,
Date de publication: 2017-08-07