• icon-wishlist
  • icon-cart
Voir tous les produits CRAFTSMAN

Outil oscillant avec cordon, 3 A, 22 000 OPM, 11 accessoires

Article #00276900 Modèle #CMEW400
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.

Outil oscillant avec cordon, 3 A, 22 000 OPM, 11 accessoires

icon-wishlist

Description

Cet outil oscillant avec cordon de Craftsman(MD) vous permettra d'accomplir plusieurs tâches avec un seul outil. Équipé d'une lame à bois, d'une lame bimétallique, d'un grattoir ou d'un patin de ponçage, cet outil est très polyvalent et vous accompagnera dans tous vos travaux de rénovation. Le système de remplacement d'accessoire sans outil vous offrira une transition rapide pour que vous retourniez aussitôt sur le chantier. L'outil oscillant est vendu avec son sac de rangement et est protégé par une garantie limitée de 3 ans.

Caractéristiques

Style
Avec cordon
Source d'alimentation
Électrique
Autre
Compatible avec le système Versatrack(MC)
Emballage
1 unité
Type
Outil oscillant
Couleur
Rouge et noir
Ampérage
3 A
Orbites par minute
10 000 à 22 000 orb. /min
Inclus
Lame à bois, lame bimétallique, grattoir, patin de ponçage, 2 papiers sablés de grain 240, 3 papiers sablés de grain 100, 2 papiers sablés de grain 80, sac de rangement
Garantie
Garantie limitée de 3 ans

Vous pourriez aussi aimer

Outil rotatif multi fonctions avec accessoires, 3,0 A icon-wishlist
DEWALT
Outil rotatif multi fonctions avec accessoires, 3,0 A
Format 3AM
Détails
Article #00276135
Outil oscillant sans fil EC sans balais StarlockPlus(MD) icon-wishlist
BOSCH
Outil oscillant sans fil EC sans balais StarlockPlus(MD)
 
Détails
Article #330658627
Outil oscillant sans fil, StarlockPlus, 18 V icon-wishlist
BOSCH
Outil oscillant sans fil, StarlockPlus, 18 V
Format 18V
Détails
Article #19836156
Trousse outil multi-fonction, Dremel Multi-Max(MC), 3,5 A icon-wishlist
DREMEL MULTI-MAX
Trousse outil multi-fonction, Dremel Multi-Max(MC), 3,5 A
Format 3.5AM
Détails
Article #19836275
Ensemble de lames-outil oscillant StarlockPlus(MD), 32 mcx icon-wishlist
BOSCH
Ensemble de lames-outil oscillant StarlockPlus(MD), 32 mcx
 
Détails
Article #330658628
Trousse pour outil rotatif, 120V, 25 pièces icon-wishlist
DREMEL
Trousse pour outil rotatif, 120V, 25 pièces
Format 25MX
Détails
Article #19836184
Outil rotatif avec accessoires icon-wishlist
DREMEL
Outil rotatif avec accessoires
Format 0.9AM
Détails
Article #19835627
Outil multi-fonction Dewalt à oscillation, 20 V XR, 3 vitesses icon-wishlist
DEWALT
Outil multi-fonction Dewalt à oscillation, 20 V XR, 3 vitesses
Format 20V
Détails
Article #00277184
Outil rotatif électrique, vitesse variable, 21 pièces icon-wishlist
DREMEL
Outil rotatif électrique, vitesse variable, 21 pièces
Format 21MX
Détails
Article #19835886
Découpeuse de cloisons sèches sans fil, 1/4" - 1/8", 20 V icon-wishlist
DEWALT
Découpeuse de cloisons sèches sans fil, 1/4" - 1/8", 20 V
Format 20V
Détails
Article #00276190
Trousse pour outil rotatif haute performance, 120V, 34 pièces icon-wishlist
DREMEL
Trousse pour outil rotatif haute performance, 120V, 34 pièces
Format 34MX
Détails
Article #19836051
Outil rotatif sans fil Micro, 8 V, 18 pièces icon-wishlist
DREMEL
Outil rotatif sans fil Micro, 8 V, 18 pièces
Format 8Vx18MX
Détails
Article #19835892
Outil Oscillant sans fil, 20 V Max, 14 pièces icon-wishlist
CRAFTSMAN
Outil Oscillant sans fil, 20 V Max, 14 pièces
Format 20V
Détails
Article #00276580
Ensemble d'outil rotatif «Série 100», 120 V icon-wishlist
DREMEL
Ensemble d'outil rotatif «Série 100», 120 V
Format 1.15AM
Détails
Article #19165087
Ensemble d'outils multifonctions VersaTip(MC) icon-wishlist
DREMEL
Ensemble d'outils multifonctions VersaTip(MC)
Format 30Wx110V
Détails
Article #1916104
Outil oscillant Multi-Max MM50, Dremel, 5,0 A icon-wishlist
DREMEL
Outil oscillant Multi-Max MM50, Dremel, 5,0 A
Format 5.0AM
Détails
Article #19836329
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Outil oscillant avec cordon, 3 A, 22 000 OPM, 11 accessoires est évalué 4.6 de 5 de 55.
Rated 3 de 5 de par Decent tool and a reasonable price. This is an adequate tool for the weekend DIY warrior. It fits all the universal blades and has really no trouble running any of them. I got the tool on sale so the price point was the deal breaker for me. Most likely would’ve gone with a Dewalt or Ryobi if this one had not been substantially cheaper. The only real negative I have is that the motor gets very hot after a few minutes of use and I’m not sure of the longevity of the electric motor because of it. I just have never had this issue with a little higher grade power tool. [This review was collected as part of a promotion.]
Date de publication: 2019-03-31
Rated 5 de 5 de par Must have tool I've always wanted one and pulled the trigger. This tool is fantastic and has more power that I thought. I bought it to sand the corners of my wood floors and this dis the job. It came with 89,100, 240 grit paper. The 80 grit made the job much faster. I would buy this tool again as a gift for someone. [This review was collected as part of a promotion.]
Date de publication: 2018-10-26
Rated 4 de 5 de par Good power, ergonomics, and utility I got this tool today. I chose corded, since wired models generally have better overall performance regardless of brand. Using the tool for grout removal was a synch. It sawed out grouting quick and easy. The only downsides were: vibration, heat, and noise. Tingling from vibration did not effect precision, nor was it ‘uncomfortable’ at all settings; however, the sensation was noticeable after use it for a while. Heat buildup, as stated in the tool manual, is worse at lower OPS settings on the speed dial. However, quickly removing the head, and running the multi unloaded at the highest setting for roughly 1 minute (as instructed) cools the tool enough for continued use. Lastly, sound from idling was significant enough to warrant wearing earplugs.
Date de publication: 2019-04-07
Rated 5 de 5 de par Plunge cut in tight quarters. I hadn't used an oscillating cutter before but it looked right for plunge cutting a vent hole in 2x6 stock mounted in tight quarters. At first, I wondered if I had made a mistake. Turns out too little pressure doesn't cut and too much pressure stalls the oscillation and also doesn't cut. Making no progress I couldn't figure out what was wrong. Fortunately it was getting dark and by headlamp I observed this oddity in the sweep of the blade and could then make adjustments in pressure to ensure continued progress. I was pleased with the result. The tool is definitely suited to plunge cutting in tight quarters, much less concerning than a reciprocal cutter when you have no idea what is behind the stock you are intending to cut. I haven't had a chance to try the other applications of this multi-tool but look forward to discovering them.
Date de publication: 2019-03-08
Rated 5 de 5 de par Great tool for the money Great tool so far. A little skimpy on attachments but for 80$ you can't go wrong. Not too whiney (compared to others I've used). Changing blade/angle is easy and quick. Size is right, with a sturdy build and high to low power. Very happy with a week of heavy use on site.
Date de publication: 2019-01-04
Rated 2 de 5 de par compatible with Versatrack? not so much!! The box and online specs state that this and many of the other V20 cordless tools are compatible with the Versatrack system. Then the fine print says the clips are sold seperately. I was able to research an discover the needed clips are part number CMSTC4VT, but Guess what? The clips cannot be found anywhere. I even spent 42 minutes on the phone with Craftsman customer care and parts department. They said they don't have any information on when they will be available. This is not Craftsman like. I am not sure what is up but I am very disappointed that I cannot get them to work with the Versatrack system.
Date de publication: 2019-04-30
Rated 4 de 5 de par New to me The Craftsman Oscillating Multi-tool is a new type of power tool for me. I purchased it for a specific project and have not had time to fully use it for that task or the muttude of other tasks it's supposed to be well suited for. I did quite an extensive search for the best value brand wise and the B$D came out on top I look forward to to further use. [This review was collected as part of a promotion.]
Date de publication: 2019-04-13
Rated 5 de 5 de par great buy!! Always wanted one finally spent the money and bought one works awesome
Date de publication: 2019-02-19
  • y_2020, m_1, d_22, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_55
  • loc_fr_CA, sid_00276900, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT