• icon-wishlist
  • icon-cart
Voir tous les produits SHARKBITE

Outil d'ébavurage en plastique pour tuyau

Article #41215019 Modèle #U702CA
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné.
icon-wishlist

Description

Cet outil d'ébavurage SharkBite enlève les bavures du tuyau pour assurer un joint complet et une étanchéité à tout épreuve. La jauge tout-en-un mesure la profondeur d'installation pour les raccords SharkBite. L'outil est compatible avec les tuyaux, en cuivre, en PVC-C et en PEX de 1/4", 3/8", 1/2", 5/8", 3/4" et 1" (0,63 cm, 0,95 cm, 1,27 cm,1,58 cm, 1,90 cm et 2,54 cm).

Caractéristiques

Type
Outil d'ébavurage
Modèle
L'outil est compatible avec les tuyaux, en cuivre, en PVC-C et en XLPE de 1/4", 3/8", 1/2", 5/8", 3/4" et 1" (0,63 cm, 0,95 cm, 1,27 cm,1,58 cm, 1,90 cm et 2,54 cm).
Composante
Plastique
Couleur
Orange

Vous pourriez aussi aimer

Bague de compression pex icon-wishlist
AQUA-DYNAMIC
Bague de compression pex
Format 1/2"x10/PK
Détails
Article #0030065
Bague pex icon-wishlist
AQUA-DYNAMIC
Bague pex
Format 1/2"x25BT
Détails
Article #00305437
Bague de compression pex icon-wishlist
AQUA-DYNAMIC
Bague de compression pex
Format 3/4"x10/PK
Détails
Article #0030066
Bague pex icon-wishlist
AQUA-DYNAMIC
Bague pex
Format 1/2"x100BT
Bas Prix
Détails
Article #00305438
Bague pex, 3/4", boîte de 25 icon-wishlist
AQUA-DYNAMIC
Bague pex, 3/4", boîte de 25
Format 3/4"x25BT
Détails
Article #00305435
Ensemble de raccords « Pushnconnect » en laiton, 13/paquet icon-wishlist
Ensemble de raccords « Pushnconnect » en laiton, 13/paquet
Format 13PK
Détails
Article #15875323
Coude 90° 1/2 po icon-wishlist
BOW
Coude 90° 1/2 po
Format 1/2"
Détails
Article #00305431
«T» 1/2 po icon-wishlist
BOW
«T» 1/2 po
Format 1/2"
Détails
Article #00305433
Adaptateur pour raccord mâle 1/2 po icon-wishlist
BOW
Adaptateur pour raccord mâle 1/2 po
Format 1/2"
Détails
Article #00305427
Bouchon 1/2 po icon-wishlist
BOW
Bouchon 1/2 po
Format 1/2"
Détails
Article #00305429
Coude 90° PEX 1/2 po icon-wishlist
BOW
Coude 90° PEX 1/2 po
Format 1/2"x25BT
Détails
Article #00305445
Bague pex icon-wishlist
AQUA-DYNAMIC
Bague pex
Format 3/4"x100BT
Détails
Article #00305436
Adaptateur Crimpex droit pour tuyau de cuivre comprimé 3/8" icon-wishlist
DAHL
Adaptateur Crimpex droit pour tuyau de cuivre comprimé 3/8"
Format 1/2x3/8" COMP
Détails
Article #36245079
Étrier de démontage en plastique, 1/2", orange icon-wishlist
SHARKBITE
Étrier de démontage en plastique, 1/2", orange
Format 1/2"
Détails
Article #41215021
Coude 90° 3/4 po icon-wishlist
BOW
Coude 90° 3/4 po
Format 3/4"
Détails
Article #00305432
«T» 3/4 po icon-wishlist
BOW
«T» 3/4 po
Format 3/4"
Détails
Article #00305434
Adaptateur pour raccord mâle 3/4 po icon-wishlist
BOW
Adaptateur pour raccord mâle 3/4 po
Format 3/4"
Détails
Article #00305428
Raccord de conversion en polybutylène, 1/2" x 1/2" icon-wishlist
SHARKBITE
Raccord de conversion en polybutylène, 1/2" x 1/2"
Format 1/2"
Détails
Article #41215032
Adaptateur Crimpex droit pour tuyau de cuivre comprimé 3/8" icon-wishlist
DAHL
Adaptateur Crimpex droit pour tuyau de cuivre comprimé 3/8"
Format 1/2x3/8"
Détails
Article #36245087
Bouchon 3/4 po icon-wishlist
BOW
Bouchon 3/4 po
Format 3/4"
Détails
Article #00305430
Adaptateur Crimpex droit pour tuyau de cuivre 5/8" icon-wishlist
DAHL
Adaptateur Crimpex droit pour tuyau de cuivre 5/8"
Format 1/2x5/8"
Détails
Article #36245078
Collecteur Pex 3/4 po icon-wishlist
AQUA-DYNAMIC
Collecteur Pex 3/4 po
Format 3/4"
Détails
Article #0030095
«T» 1/2 po pex icon-wishlist
BOW
«T» 1/2 po pex
Format 1/2"x25BT
Détails
Article #00305442
Coude de cuivre icon-wishlist
AQUA-DYNAMIC
Coude de cuivre
Format 1/2PEXx3 1/2x6"
Détails
Article #0030194
Coude de cuivre, 1/2x3 1/2x8" icon-wishlist
AQUA-DYNAMIC
Coude de cuivre, 1/2x3 1/2x8"
Format 1/2PEXx3 1/2x8"
Détails
Article #0030195
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Outil d'ébavurage en plastique pour tuyau est évalué 4.8 de 5 de 33.
Rated 5 de 5 de par Very Handy I am new to PEX and needed to cut into some to install my whole house humidifier. I borrowed a neighbors PEX cutter and that tool actually created a nice clean cut and left nothing to deburr so I can't speak to the deburring capabilities. However, this tool is also a depth gauge that comes in handy when using the Sharkbite connectors. PEX must be properly seated into the Sharkbite to get a water tight result. Simply insert the PEX into this gauge and then mark the pipe with an indelible marker. Then, join the PEX to the Sharkbite to the depth that you marked and you can be confident of a water tight connection. does six different sizes of PEX. This is a very handy tool.
Date de publication: 2018-02-01
Rated 4 de 5 de par Useful, but know it's limitations I was never a fan of "mechanical" seals behind walls until I helped my son-in-law rebuilding their bathroom. Still leary of hidden applications, but I made the jump and have used these when joining difference materials (as in old copper to CPVC). As a depth gage, very easy and useful. For deburring the OD - useful, although I think careful use of a small knife works fine also. I suspect those who report "chattering" or the like may have been using too much pressure. For deburring the ID - it was not intended for this purpose, which I find disappointing, given that the "seal" surface is the ID. I ensure a clean, burr-free ID by using a little emory cloth.
Date de publication: 2017-03-12
Rated 5 de 5 de par Prepping copper pipe made easy New to the SharkBite system of repairing copper pipe, needed to cutout and replace water pipe and used this for the first time, loved it ! Bought this afterwards to help with other repairs, great tool for various sizes of pipe, works in seconds.
Date de publication: 2017-09-28
Rated 5 de 5 de par Well made but in my opinion not needed. The part is well made and does what it is intended to do. It is pricey for such an inexpensive plastic part. I used this to mark fittings as I ran water to my garage. What I found was you can pretty well tell when the pipe is all the way in as you can feel that it will not go any further and you become familiar with the looks of the depth vs the feel as well. Buy if it makes you feel more comfortable but really not needed. [This review was collected as part of a promotion.]
Date de publication: 2019-02-06
Rated 5 de 5 de par SharkBite tools and accessories While using SharkBite fittings and PEX tubing, using the Depth Gauge/Deburr Tool was very helpful in preparing the piping and tubing for plumbing repairs and calculated the correct measurements for the tubing pieces. [This review was collected as part of a promotion.]
Date de publication: 2019-07-03
Rated 5 de 5 de par Multi purpose tool 1. Remove burr 2. Mark correct depth for insertion 3. Remove the plastic insert when using sharkbite fittings on copper pipe so that the bore size is not restricted. [This review was collected as part of a promotion.]
Date de publication: 2019-01-15
Rated 5 de 5 de par Must Need After i screwed up a pipe cutting because of not measuring the insert correctly, this product saved me from making that same mistake twice. DIY plumbing can be stressful enough and preventing the minor things from becoming a big. This takes the question out of how deep the piping will go in so you can accurately measure for the best fit. [This review was collected as part of a promotion.]
Date de publication: 2018-11-30
Rated 5 de 5 de par It works. If you are going to be using a lot of SharkBite fittings, you need this tool.
Date de publication: 2018-05-06
  • y_2020, m_5, d_26, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_fr_CA, sid_41215019, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT