
Description
KERDI est une membrane d'étanchéité et pare-vapeur de polyéthylène en feuilles. KERDI200/5M couvre 54 pieds carrés et est idéale pour l'étanchéité de contours de baignoires et de douches. La membrane est recouverte sur les deux côtés d'un feutre non tissé qui permet l'ancrage dans le ciment-colle. Elle évite les infiltrations d'eau pouvant occasionner des moisissures.
Caractéristiques
Format
3,25' x 16,42' (1 x 5 m); 54 pi² (5 m²)
Composante
Acier inoxidable
Couleur
Orange
Modèle
KERDI
Vous pourriez aussi aimer
Quelle ciment colle utiliser pour membrane schluter
Bonjour,
Ciment-colle modifier sur le contreplaqué et
Ciment-colle non modifier sur dalle de béton et sur la même membrane pour installer la céramique, la porcelain ou la pierre naturel.
Si vous avez d’autres questions n’hésitez pas à nous contacter.
Date de publication: 2020-12-26
Is the schluter membrane suitable for exterior tile applications on cement slab
Can this product be used as a floor tile underlament? In other words does it provide any shear stress properties to prevent cracking?
Membrane d'étanchéité « Kerdi », 1 x 5 m est évalué
de
5 de
11.
Rated 4 de
5
de
Adoityourselfer par
Kerdi systems
Worked great. Was our first time using and it was pretty easy to install for a do it yourselfer. That being said there were additional pieces that could be ordered like nook pieces we wish we had been told about before we started the project. As we ended up doing a make shift book for shampoo soap. Had I not been creative and use to doing home improvement projects this would not have been possible with what I had. It was the most time consuming part of the project. We did our shower/tub combo and went right over the old plaster were the tile had been taken down. We used it thinking it would save us money and be easier to use. Was much harder then doing traditional water barrier and cement board, and took much longer. And ended up cost a bit more in the end. Results were as good as cement board and it really does end up feeling just like cement board with water proofer built in. Was not the easiest route, but turned out great. It did take a couple attempts on the first piece to get the hang of it.
Date de publication: 2016-04-11
Rated 5 de
5
de
Glen par
Best way to waterproof a shower
Built a new shower and used the Kerri membrane to water proof it. Easy to install and makes a great surface for tile. Pricey but the best way to get a quality shower.
Date de publication: 2017-06-15
Rated 5 de
5
de
tinbender par
Be meticulous!
Watch the video, follow directions meticulously and be ready to cover yourself in thin set! That said, the product is great. I have used it over drywall many times without fail. Be sure to get unmodified Thunder.
Date de publication: 2016-03-09
Rated 5 de
5
de
doitmyselfer par
Work fast
Have every thing ready and at hand. It embeds well if the mortar is wet. Finished job looks great.
Date de publication: 2017-07-27
Rated 5 de
5
de
Phazelvos par
Hard to say
Having no previous long term experience I'm not sure
but, it appears to be a good product. I like the goal and will see in 20-30 years
if it does the job. The grid lines do make it a bit easier to lay the tile nice 'n straight.
Just make sure you put it down/up level and square. [This review was collected as part of a promotion.]
Date de publication: 2019-01-08
Rated 4 de
5
de
Ttp par
Install was straightforward followed instructions. Haven’t finished tile so no review on that. My tile guy says it’s the only system he trust and will guarantee! [This review was collected as part of a promotion.]
Date de publication: 2019-04-09
Rated 5 de
5
de
Steve par
Easy to use.
This product seems to be of good quality and is relatively easy to use. It looks as if a really good waterproofing barrier will be achieved.
Date de publication: 2017-11-10
Rated 5 de
5
de
Carpenter par
Easy to use, and install [This review was collected as part of a promotion.]
Date de publication: 2018-09-21