• icon-wishlist
  • icon-cart
Voir tous les produits DEWALT

Mandrin d'impact

Article #0027587 Modèle #DW0521 Format 3/8"
Cet article n'est pas offert pour le moment, mais il peut être commandé en visitant le magasin sélectionné. Les magasins reçoivent généralement les produits dans un délai de 3 à 7 jours à partir de la date de la commande.
icon-wishlist

Description

Mandrin d'impact de 3/8 po à raccordement rapide. La connexion hexagonale de 1/4 po permet à l'utilisateur de passer rapidement du mode de vissage au mode de perçage. Conception à manchon unique permettant le serrage d'une seule main. Construction toute en métal pour une durabilité maximale.

Vous pourriez aussi aimer

Foret pour verre et tuiles, 1/4 po icon-wishlist
BOSCH
Foret pour verre et tuiles, 1/4 po
Format 1/4"
Détails
Article #19835551
EMBOUT TOURNEVIS CAR/PH #2 X 2" icon-wishlist
EMBOUT TOURNEVIS CAR/PH #2 X 2"
Format 2"x10MX
Détails
Article #34595589
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x2"
Détails
Article #34595562
EMBOUT DE TOURNEVIS icon-wishlist
EMBOUT DE TOURNEVIS
Format #2x6"
Détails
Article #34595567
ENSEMBLE D'EMBOUTS DE TOURNEVIS CARRÉ icon-wishlist
ENSEMBLE D'EMBOUTS DE TOURNEVIS CARRÉ
Format #2x2"x10MX
Détails
Article #34595588
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x4"
Détails
Article #34595558
EMBOUT DE TOURNEVIS icon-wishlist
EXCHANGE-A-BLADE
EMBOUT DE TOURNEVIS
Format #2x2 3/4"
Détails
Article #34595564
Tourne-écrous et support pour visseuse à chocs, 2", 6 pièces icon-wishlist
EXCHANGE-A-BLADE
Tourne-écrous et support pour visseuse à chocs, 2", 6 pièces
Format 2"x5MX
Détails
Article #09325002
Foret pour verre et tuiles, 3/16 po icon-wishlist
BOSCH
Foret pour verre et tuiles, 3/16 po
Format 3/16"
Détails
Article #19835550
Ensemble de forets pour carreaux de verre icon-wishlist
BOSCH
Ensemble de forets pour carreaux de verre
Format 4MX
Détails
Article #19835447
Embouts pour tournevis Dewalt, 37 pièces icon-wishlist
DEWALT
Embouts pour tournevis Dewalt, 37 pièces
Format ST/37
Détails
Article #0794509
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt icon-wishlist
BOSCH
Foret à métal avec revêtement titane, 1/8'' x 2 3/4'', 2/pqt
Format 1/8x2 3/4"xPK2
Détails
Article #13545442
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 5/32x6"
Détails
Article #13545467
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 5/32x6"
Détails
Article #1983025
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x6"
Détails
Article #1983026
Foret pour verre et céramique, 5/16'' icon-wishlist
BOSCH
Foret pour verre et céramique, 5/16''
Format 5/16"
Détails
Article #19835552
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x6"
Détails
Article #13545470
Foret en titane, 1/8", base hexagonale de 1/4", 2/pqt icon-wishlist
CRAFTSMAN
Foret en titane, 1/8", base hexagonale de 1/4", 2/pqt
Format 1/8"xTI1/4"
Détails
Article #00276905
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte icon-wishlist
BOSCH
Ensemble de forets Bosch à usages multiples, oxyde d'or, 29/bte
Format 29/BT
Détails
Article #19836336
Porte-embout de tournevis aimanté, 3" icon-wishlist
DEWALT
Porte-embout de tournevis aimanté, 3"
Format 3"
Détails
Article #0794313
Foret plat Daredevil(TM) régulier, 3/4'' x 6'' icon-wishlist
BOSCH
Foret plat Daredevil(TM) régulier, 3/4'' x 6''
Format 3/4"
Détails
Article #19835687
Foret à fraiser icon-wishlist
WOLFCRAFT
Foret à fraiser
Format #8
Détails
Article #1137169
Ensemble de forêts, 13 pièces icon-wishlist
DEWALT
Ensemble de forêts, 13 pièces
Format 13MX
Détails
Article #00275548
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6'' icon-wishlist
BOSCH
Foret plat Daredevil(TM) régulier, 1 1/2'' x 6''
Format 1 1/2"
Détails
Article #19835692
FORET À BÉTON icon-wishlist
BOSCH
FORET À BÉTON
Format 3/16x3"
Détails
Article #13545469
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Mandrin d'impact est évalué 2.5 de 5 de 44.
Rated 5 de 5 de par Great attachment I'll say I bet that most of the negative reviews are from people that don't know how to use this thing and think it's broken. I was excited to get this item to use my with drill bits having just upgraded from a B&D drill/driver to a Dewalt impact driver. I opened the package, put it in the driver, tried to put a drill bit in it and.... couldn't get it it work. It appeared that it was locked in the full open position, I couldn't get it to close around the bit at all. I thought I'd gotten a defective item. I then picked up the instructions and realized I wasn't using it correctly. To tighten, put driver in forward, hold the chuck with other hand, squeeze trigger while holding chuck. The chuck will ratchet and lock onto the bit. To release the bit, put driver in reverse, hold chuck, squeeze trigger. Chuck will ratchet and then release the bit. Sometimes it does actually pay to read the instructions.
Date de publication: 2017-12-29
Rated 1 de 5 de par Do not purchase! My bf bought this chuck for his cordless drill to use on concrete, and the first one would not work right away. The head on the inside would not come out. We returned it, and the second one was opposite, the head on the inside came out but would not open, so I returned that one as well. It was in our garage for about 2 weeks and even had rust on it when I was returning it. The cashier thought I was lying about when I had made the purchase. We think its a defective product, and needs to be recalled. It was the only one lowe's had instore. I think the good reviews are from a previous model, as they are a few years old. Good luck, try something else if you can.
Date de publication: 2014-06-07
Rated 5 de 5 de par Great chuck I have the Makita version of this Japanese chuck. It has the best grip of any keyless chuck. It appears that the negative reviews are by people that don't know how to use it. It has an internal impact action for tightening and loosening the bit. You first close the chuck on your bit and then hold the chuck sleeve while you run the drill to tighten. To loosen the bit, hold the chuck sleeve and run drill in reverse.
Date de publication: 2017-11-26
Rated 1 de 5 de par An Expensive Lesson I bought this so that I could use various drill bits on my DeWalt Impact Driver. It had a tendency tol lock on and not release. Finally it locked onto something for good. I couldn't return it because in order to extract my 90 degree drill adapter that was stuck in it I had to destroy it. Only when I had it down to it's very core was I able to get it's jaws to release. I assume it isn't intended to be used with impact drivers.
Date de publication: 2015-05-08
Rated 5 de 5 de par Seriously high quality This made in Japan tool is truly industrial quality. It's beautifully finished and performs impressively. I use it with my cordless impact driver (after throwing out my previous adapter). It works great in my standard cordless drill also.
Date de publication: 2011-10-14
Rated 1 de 5 de par Big Mistake!! After several uses, the chuck locked and will not release! Like a previous reviewer mentioned, you have to destroy it to get it opened. Don't buy this ... it'll be a Big Mistake!
Date de publication: 2017-04-02
Rated 1 de 5 de par Stuck open I bought this, worked alright for an hour. Now it is stuck open. It will not close to fit around the bit. Ive tried everything. Seems like many are having an issue with it not releasing the bit, but mine is doing the opposite. Very flawed product. I'll be returning it.
Date de publication: 2019-06-18
Rated 1 de 5 de par Made good I can't find a way to add to my previous review, so am putting in a separate one. Previously I had posted what a problem I had with this product. That had not changed. DeWalt did contact me after my review and replaced my chuck and sent a 14 pack of drill bits. Some have stated that they destroyed their chuck getting the bit out. You don't have to hurt the chuck or the bit. Screw out the shank, set the chuck in a vice set open slightly larger then the bit. drive the bit out through the shank opening with a blunt nosed punch. This, of course, should not be necessary but it will get your bit out w'out any damage. Mine was a 1/2" bit, may be a little harder with a smaller bit? Anyways, I appreciate DeWalts efforts at making good on a bad situation even though I am still reluctant to try and use it again. Mostly the impact driver is for driving screws.
Date de publication: 2019-01-21
  • y_2020, m_4, d_1, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_fr_CA, sid_0027587, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rona
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • REVIEWS, PRODUCT